1976fenderhead Posted March 5, 2013 Share Posted March 5, 2013 [IMG]http://i8.photobucket.com/albums/a2/1976fenderhead/Pedalboards/file.jpg[/IMG] Just want the new MXR Bass Chorus Deluxe and I'm happy. (and maybe a Polytune Mini to make room for it) Quote Link to comment Share on other sites More sharing options...
Ashwood1985 Posted March 5, 2013 Share Posted March 5, 2013 [quote name='teamcoy' timestamp='1362324161' post='1998346'] Have had a look, yes, you can with pre recorded loops but not on the fly loops. It is completely seemless too, quite clever how it works actually, can select loop 2 to play while loop 1 is playing, it will then start immediately after loop 1 ends. If you were recording loop 1, once you had finished and triggered playback, you can then select a pre-recorded loop which will start at the end of the loop cycle. There may be a way to do it with live loops, but with the noodle I just had, I couldn't see it. Hope this helps. Nice board too, good luck squeezing the DH pedal on. [/quote] Hey Matt, Thanks a lot - that's REALLY helpful Likin your very tone-conscious board btw!! Quote Link to comment Share on other sites More sharing options...
Guest teamcoy Posted March 6, 2013 Share Posted March 6, 2013 No worries, glad to have been of help. I'm fighting with three guitarists, tone is my only hope. Hehe. [quote name='Ashwood1985' timestamp='1362518447' post='2000788'] Hey Matt, Thanks a lot - that's REALLY helpful Likin your very tone-conscious board btw!! [/quote] Quote Link to comment Share on other sites More sharing options...
cheddatom Posted March 6, 2013 Share Posted March 6, 2013 [quote name='tonyquipment' timestamp='1362511317' post='2000570'] New setup Yeah. [/quote] What are you using the mixer for Tony? Quote Link to comment Share on other sites More sharing options...
tonyquipment Posted March 6, 2013 Share Posted March 6, 2013 The octave splits off into two signals.. The clean signal goes into the overdrive The mixer puts them back together into one signal ! It's a cheap LS2 basically... With built in reverb/delay which I never use... Quote Link to comment Share on other sites More sharing options...
cheddatom Posted March 7, 2013 Share Posted March 7, 2013 so wah, OD, and Gate are all blended with clean/octave... where does the pitch box go? It's a cool board anyway, you just need another 3 dirt pedals Quote Link to comment Share on other sites More sharing options...
tonyquipment Posted March 7, 2013 Share Posted March 7, 2013 Yeah! The pitch box I might stick between the OD and noise gate if I want a slight detuned sound I think I might keep the pitch box for my guitar setup though.. Makes a nice chorus sound! Quote Link to comment Share on other sites More sharing options...
cheddatom Posted March 7, 2013 Share Posted March 7, 2013 octave up can be cool on bass, especially combine with some dirt and/or delay, you might want to give it a try Quote Link to comment Share on other sites More sharing options...
tonyquipment Posted March 7, 2013 Share Posted March 7, 2013 Noooo octave down! I only use the octave for the low end... Turn that off and the bass sounds thin and whispy lol I do turn the octave off when I have to do intro or strumming as it gets confused and sounds all manky.. Quote Link to comment Share on other sites More sharing options...
Ashwood1985 Posted March 7, 2013 Share Posted March 7, 2013 So you have the oc3 as 'always on'!? Controversial!! What's your bass(es) and rig? I should think that if a rig sounds thin the answer would be to assess the rig before chucking in an always on lower octave? Hey whatever works for you dude! Sounds a bit c'raazzzyyy to me tho! Since I've got my Eden set up I've worried a lot less about tone from the board :-D Quote Link to comment Share on other sites More sharing options...
cheddatom Posted March 7, 2013 Share Posted March 7, 2013 [quote name='tonyquipment' timestamp='1362649309' post='2002584'] Noooo octave down! I only use the octave for the low end... Turn that off and the bass sounds thin and whispy lol I do turn the octave off when I have to do intro or strumming as it gets confused and sounds all manky.. [/quote] well you've got your octave down pedal going into the mixer, then the clean out of that goes into your dirt. If you ran that into the pitchbox for octave up it might be a massive sound! Quote Link to comment Share on other sites More sharing options...
tonyquipment Posted March 7, 2013 Share Posted March 7, 2013 Yeah the pitch box sounds a bit mucky on pitch shift mode. The detune mode is really good though. I'm running through a 3/4 precision cheap copy but it plays lovely! 60w combo through headphones( I live in a flat with children either side of me) Would be interesting to try it out on a massive high powered rig. I think I would probably blow the doors off LOL I'm waiting for a chorus to stick on the end of the OD then my life is complete I think! Noo more marketplace !!! My wallet bleeds. Constantly. Quote Link to comment Share on other sites More sharing options...
chrismuzz Posted March 7, 2013 Share Posted March 7, 2013 I just got another drive pedal so it's time for an update then I reckon! The signal path is as follows: Stageclix Jack > Aguilar TLC > Ashdown Lomenzo Hyperdrive > Sansamp PBDDI > Marshall Jackhammer > Zoom B3 All of the drive pedals have pretty low/medium gain settings so are very usable together or on their own. The 2nd preset on the Sansamp is horribly clanky when I want to go stupid... And if I need fuzz I use a Bass Muff on the B3 with some reverb Quote Link to comment Share on other sites More sharing options...
Dave Vader Posted March 8, 2013 Share Posted March 8, 2013 Finally stopped just using my guitar board for bass, and made this from an old shelf and some jaffa tape. Relatively simple but awesome. Quote Link to comment Share on other sites More sharing options...
Defo Posted March 10, 2013 Share Posted March 10, 2013 [attachment=129538:IMG_0866.jpg] Quote Link to comment Share on other sites More sharing options...
dudewheresmybass Posted March 10, 2013 Author Share Posted March 10, 2013 Hi defo. Interesting board. Is that a g bone? Quote Link to comment Share on other sites More sharing options...
Defo Posted March 10, 2013 Share Posted March 10, 2013 Thanks dudewheresmybass, its a Gator Mega Bone, seems the perfect board at the moment, the B3 sits really nicely in the middle. I will probably play with the pedals some more, maybe add a wah at some stage Quote Link to comment Share on other sites More sharing options...
GazWills Posted March 10, 2013 Share Posted March 10, 2013 little change to the PT mini... room for one more, but so far this is working very nicely Quote Link to comment Share on other sites More sharing options...
Spoombung Posted March 10, 2013 Share Posted March 10, 2013 Pretty minimal set up made from an old camping table top. These are the only two effects I'm currently interested in but I may add an octaver and find room for the compressor at some point. Quote Link to comment Share on other sites More sharing options...
EskimoBassist Posted March 10, 2013 Share Posted March 10, 2013 [quote name='GazWills' timestamp='1362914139' post='2006047'] little change to the PT mini... room for one more, but so far this is working very nicely [/quote] WANT your Russian so hard. One space - octave/filter? An Octamizer or a 3Leaf Proton would be sick on there. Quote Link to comment Share on other sites More sharing options...
GazWills Posted March 10, 2013 Share Posted March 10, 2013 it's an awesome fuzz i dunno, I've had lots of phasers, octaves and filters before, but just don't EVER seem to use them in my bands... may try a chorus for the gap, I've never really had one on my board before but have used them quite a lot in the studio over the years... Quote Link to comment Share on other sites More sharing options...
TG Flatline Posted March 11, 2013 Share Posted March 11, 2013 [quote name='GazWills' timestamp='1362914139' post='2006047'] little change to the PT mini... room for one more, but so far this is working very nicely [/quote] Nice. Excellent choice of dirt! Quote Link to comment Share on other sites More sharing options...
GazWills Posted March 11, 2013 Share Posted March 11, 2013 thanks Quote Link to comment Share on other sites More sharing options...
Twigman Posted March 11, 2013 Share Posted March 11, 2013 Here you go; Quote Link to comment Share on other sites More sharing options...
Fender_Greg Posted March 12, 2013 Share Posted March 12, 2013 [quote name='Twigman' timestamp='1363039435' post='2007550'] Here you go; [/quote] You have a gap that's absolutely dying to be filled! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.