vegas_hooker Posted June 8, 2008 Share Posted June 8, 2008 Yeah, I know, its not the most colourful of boards, literally or sonically. But I like quite a visually austere set up. I suppose i'm more into loops, gain and drive than modulation and filters so Ive tried to keep my board to a minimum and keep it clutter free. I have a few other pedals Id like to look into, maybe a moog, tonefactor or line6 modulator, but maybe another time. Any recommendations are welcome. Quote Link to comment Share on other sites More sharing options...
Kev Posted June 9, 2008 Share Posted June 9, 2008 well what you after? alot of people like the moogs, but they need to be in a loop as they suck tone badly when bypassed Quote Link to comment Share on other sites More sharing options...
vegas_hooker Posted June 9, 2008 Share Posted June 9, 2008 Yeah, quite turned on by the ring modulator though I have heard it can 'bleed' even when its not engaged. Id go for a barge concepts loop for that, I think id really get on with the feedback setting. Im struggling to really name anything I want. I guess my basses are covered with what I have, though I imagine a violent synth/fuzz and a few filters might be a nice addition. Im not big on things like chorus or flanger so less 80's and more other worldly. Guess that (doesn't) narrow things down. Quote Link to comment Share on other sites More sharing options...
Kubickiboy Posted June 10, 2008 Share Posted June 10, 2008 Couldn't resist. Boomstick Bottom Feeder surrounded by DS-1, ODB-3 and Sovtek/EHX Muff... Would you stick any of them in the exsiting board?. Or do I start work on another one? I've put them in order as I've planned - R to L. Any suggestions guys? Quote Link to comment Share on other sites More sharing options...
umph Posted June 10, 2008 Share Posted June 10, 2008 bottom feeder first obv then distortions and i'd turn the tone down on that big muff unless you modded the tone circuit Quote Link to comment Share on other sites More sharing options...
Ant Posted June 16, 2008 Share Posted June 16, 2008 Final incarnation for a while i reckon, got loads more stuff off the board for other stuff, but this is what i use mostly. Quote Link to comment Share on other sites More sharing options...
cheddatom Posted June 16, 2008 Share Posted June 16, 2008 Is there sposed to be a pic there Ant? Kubickiboy - I would make another layer ontop of your PSU and where the foam is, there's no need for another board! I would have bottom feeder, ODB-3, BM. I can't see the point in the DS-1, I remember it being very similar to the ODB-3 but without the EQ control? Maybe not. Quote Link to comment Share on other sites More sharing options...
Kev Posted June 16, 2008 Share Posted June 16, 2008 [quote name='cheddatom' post='219836' date='Jun 16 2008, 01:44 PM'][b]Is there sposed to be a pic there Ant? [/b] Kubickiboy - I would make another layer ontop of your PSU and where the foam is, there's no need for another board! I would have bottom feeder, ODB-3, BM. I can't see the point in the DS-1, I remember it being very similar to the ODB-3 but without the EQ control? Maybe not.[/quote] there is? nice board mate Quote Link to comment Share on other sites More sharing options...
Higgie Posted June 16, 2008 Share Posted June 16, 2008 Ant your board gets better everytime I see it. Good stuff. Quote Link to comment Share on other sites More sharing options...
Dubs Posted June 16, 2008 Share Posted June 16, 2008 "press for funk" i like Quote Link to comment Share on other sites More sharing options...
cheddatom Posted June 16, 2008 Share Posted June 16, 2008 [quote name='BassManKev' post='219845' date='Jun 16 2008, 02:00 PM']there is? [/quote] There wasn't when I looked! Damn internet making me look like a fool. That's a very cool board Ant! Quote Link to comment Share on other sites More sharing options...
mr pablo Posted June 18, 2008 Share Posted June 18, 2008 Thats me done for now until i can afford an new (bigger) board or decide what i'm gonna use with the bands i'm in at the mo so here goes. . . . The chain goes TU2 > cream pie > Polish love > BYOC Large beaver (or blue beaver as i called mine) > guyatone EQ > Dod chorus > punch factory > sansamp BDDI Quote Link to comment Share on other sites More sharing options...
Kev Posted June 19, 2008 Share Posted June 19, 2008 (edited) my somewhat sparse 'pedalboard' nice to see how my flash not only makes for a sh*te pic, but also highlight a load of sh*te on my carpet, lovely... Edited June 20, 2008 by BassManKev Quote Link to comment Share on other sites More sharing options...
tayste_2000 Posted June 19, 2008 Share Posted June 19, 2008 This weeks Quote Link to comment Share on other sites More sharing options...
Finbar Posted June 19, 2008 Share Posted June 19, 2008 That's hot. Quote Link to comment Share on other sites More sharing options...
cheddatom Posted June 20, 2008 Share Posted June 20, 2008 Tayste, oh tayste, uh, yes, i'm close, just one more pic..... Quote Link to comment Share on other sites More sharing options...
Higgie Posted June 20, 2008 Share Posted June 20, 2008 Lookin' good Ste. Way too many pedals for a bassist though Quote Link to comment Share on other sites More sharing options...
Dread Bass Posted June 20, 2008 Share Posted June 20, 2008 the rise of the behemoth. Looking good steve well done. Quote Link to comment Share on other sites More sharing options...
Dread Bass Posted June 20, 2008 Share Posted June 20, 2008 didnt no u had an xotic blender. new? how many loops will you no have on the board now? Quote Link to comment Share on other sites More sharing options...
Kubickiboy Posted June 23, 2008 Share Posted June 23, 2008 [quote name='Kubickiboy' post='216507' date='Jun 10 2008, 11:29 PM']Couldn't resist. Boomstick Bottom Feeder surrounded by DS-1, ODB-3 and Sovtek/EHX Muff... Would you stick any of them in the exsiting board?. Or do I start work on another one? I've put them in order as I've planned - R to L. Any suggestions guys?[/quote] UPDATE!!! Now the order is TU2> Sansamp> DiscumBoBulator> CEB3> Bottom Feeder> TC Dist> EHBB Sansamp at the front just levels everything out. Take the DI out of my GK. Roll off bass and treble and add mid on my Status. Kubicki mind is a different kettle of fish - have to really roll the bass off when in active setting. That Bottom Feeder is just a whole lot better then the AW3. But there's space again on this board. Quote Link to comment Share on other sites More sharing options...
cheddatom Posted June 24, 2008 Share Posted June 24, 2008 Stick your ODB-3 on for bad-boy bottom end! Quote Link to comment Share on other sites More sharing options...
dannybuoy Posted June 24, 2008 Share Posted June 24, 2008 Try the Muff into the Bottom Feeder. It should sound pretty close to my Supercollider -> Tonefactor 442 combo that gives me some really nice drum'n'bass synth like sounds. Might not be useable for your band, but it's a lot of fun to play! Quote Link to comment Share on other sites More sharing options...
Kev Posted June 24, 2008 Share Posted June 24, 2008 anyone here think £20 is a decent price for a used but tested 'good' mullard ax7 valve?? i need to decide fast as im sure someone else will buy soon if i dont! Quote Link to comment Share on other sites More sharing options...
mr pablo Posted June 24, 2008 Share Posted June 24, 2008 Its a bit much if you ask me, £20 + is what you'd pay for a N.O.S one Quote Link to comment Share on other sites More sharing options...
Kev Posted June 25, 2008 Share Posted June 25, 2008 well too late, bought now, seems to fit in with completed ebay listings, so if it dont work out il at least get my money back Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.