Aliwobble Posted January 30, 2019 Share Posted January 30, 2019 On 29/01/2019 at 10:40, operative451 said: Ok, so anyone want to buy a zoom b3n? with my little warwick bc15.1 amp what I like, this seems to be all I need..! I just need an actual board, and I have an idea for that...! My first board was, literally, a weatherboard I had lying around in the garage. Screw some rubber feet on and you’re good to go. Eventually it ended up painted metallic silver and had fancy bits like holes for cables drilled into it. Quote Link to comment Share on other sites More sharing options...
operative451 Posted January 30, 2019 Share Posted January 30, 2019 4 hours ago, Aliwobble said: My first board was, literally, a weatherboard I had lying around in the garage. Screw some rubber feet on and you’re good to go. Eventually it ended up painted metallic silver and had fancy bits like holes for cables drilled into it. I was watching a 'rig rundown' on youtube and someone had a chopping board that they've stuck velcro on.. I plan on going to wilco at the weekend for a mini chopping board, some stick on feet and possibly some cool coloured spray paint.. I'll do a build diary 1 Quote Link to comment Share on other sites More sharing options...
Daz39 Posted January 30, 2019 Share Posted January 30, 2019 7 minutes ago, operative451 said: I was watching a 'rig rundown' on youtube and someone had a chopping board that they've stuck velcro on.. I plan on going to wilco at the weekend for a mini chopping board, some stick on feet and possibly some cool coloured spray paint.. I'll do a build diary You'd better post a pic of said board covered in at least 39 clamps, else I'll get the Basschat Luthiers Guild involved! Quote Link to comment Share on other sites More sharing options...
Newfoundfreedom Posted January 30, 2019 Share Posted January 30, 2019 (edited) 22 hours ago, operative451 said: I was watching a 'rig rundown' on youtube and someone had a chopping board that they've stuck velcro on.. I plan on going to wilco at the weekend for a mini chopping board, some stick on feet and possibly some cool coloured spray paint.. I'll do a build diary I made mine out of an old pallet I blagged from my local bar. Cut it down to size. Edged with a bit of old tongue and groove I had knocking around. Painted black. Covered in double sided tape and velcro. The feet are actually a couple of old plastic bolts that you get in new washing machines to stop the barrel moving when it's being delivered. Total cost, about a fiver for the velcro and double sided tape. I don't think it looks too bad. Edited January 31, 2019 by Newfoundfreedom 3 Quote Link to comment Share on other sites More sharing options...
danny-79 Posted January 31, 2019 Share Posted January 31, 2019 Just built this today to accommodate the Duality. (Still undecided if it should go before or after the B3K) 4 Quote Link to comment Share on other sites More sharing options...
Al Krow Posted January 31, 2019 Share Posted January 31, 2019 Is it fair to say you're a fan of DG pedals?! 😄 I'm guessing your favourite dirt is the AO? 1 Quote Link to comment Share on other sites More sharing options...
danny-79 Posted January 31, 2019 Share Posted January 31, 2019 9 minutes ago, Al Krow said: Is it fair to say you're a fan of DG pedals?! 😄 I'm guessing your favourite dirt is the AO? Yeah you could say that 😜 the AO is great, always on then kick the B3K in to give it a lift. Only put the Duality on today so still undecided about the best place for it. Before or After the B3. The two work very well together in either order just very differently Quote Link to comment Share on other sites More sharing options...
danny-79 Posted February 1, 2019 Share Posted February 1, 2019 After a bit/lot of experimenting I’ve found putting the B3K after the Duality works best for me, helps tame the high gain of the Duality. The two together in that order sound perfect to me. (For now at least) 😜 1 Quote Link to comment Share on other sites More sharing options...
A.G.E.N.T.E. Posted February 5, 2019 Share Posted February 5, 2019 Work in progress. Quote Link to comment Share on other sites More sharing options...
Kamiel Posted February 5, 2019 Share Posted February 5, 2019 8 hours ago, A.G.E.N.T.E. said: Work in progress. Looks nice. Is it supposed to be future proof or is there an other reason you're leaving quite some open space? (Or now I think about it, do you already have the novo32?) Quote Link to comment Share on other sites More sharing options...
krispn Posted February 5, 2019 Share Posted February 5, 2019 AOU added and tone hammer switched to gig bag back up. Think this’ll be it for quite some time!! Quote Link to comment Share on other sites More sharing options...
A.G.E.N.T.E. Posted February 5, 2019 Share Posted February 5, 2019 14 minutes ago, Kamiel said: Looks nice. Is it supposed to be future proof or is there an other reason you're leaving quite some open space? (Or now I think about it, do you already have the novo32?) Yes @Kamiel I allready have all that stuff, but i´m trying to redo my board. The Delay, flanger, octave and reverb individual pedals might be out of this new iteration duo to the B3n. To much stepdance envolved at the moment Still planning how i will distribute the pedals . 1 Quote Link to comment Share on other sites More sharing options...
danny-79 Posted February 5, 2019 Share Posted February 5, 2019 12 hours ago, A.G.E.N.T.E. said: Work in progress. What Fuzz are you using and why infront of the B3K ? (Still can’t make my mind up. I’m fuzz first atm) Quote Link to comment Share on other sites More sharing options...
A.G.E.N.T.E. Posted February 5, 2019 Share Posted February 5, 2019 (edited) 28 minutes ago, danny-79 said: What Fuzz are you using and why infront of the B3K ? (Still can’t make my mind up. I’m fuzz first atm) It`s a Blackout Effectors - Musket Fuzz clone with a extra blend control . I look at this as different gain stages. Sometimes i use them staked, sometimes individualy. But that´s just the way i like it. Now with the ES-5 i might even try them in parallel . Many experiencies are still to be made Edited February 5, 2019 by A.G.E.N.T.E. 1 Quote Link to comment Share on other sites More sharing options...
Higgie Posted February 5, 2019 Share Posted February 5, 2019 (edited) https://imgur.com/a/wgnACuz My new board Bass>Thumpinator>Cali76>Sadowsky DI Tuner on the tuner output of the Sadowsky Behringer P1 for my IEMs. All powered from the GigRig Generator Edited February 5, 2019 by Higgie Quote Link to comment Share on other sites More sharing options...
Jean-Luc Pickguard Posted February 8, 2019 Share Posted February 8, 2019 Here's my small pedalboard which contains everything I need [sfx] Micro Thumpinator TC Electronic Spectracomp Tech 21 VT Bass TC Electronic Spark mini booster powered from a caline CP-02 2 Quote Link to comment Share on other sites More sharing options...
Finbar Posted February 8, 2019 Share Posted February 8, 2019 (edited) I have not posted in this thread since 2011! Are any of the old big pedalboard crew still around? I'm thinking TaySte, Cheddatom, Shep etc I’ve also barely played bass since 2011! Decided to move to a teeny tiny board (PT Nano+), but I think it was too small Definitely feel like I’m missing things, but I've simply run out of room. A lot of this board is taken up with 'boring' stuff, so I might try and move the wireless and the Thumpinator underneath. There isn’t a lot of room under here though! Currently using a Diago power supply 'off board', but looking to stick a Cioks DC5 under there when I get paid. The Catalinbread Hyperpak is a placeholder for... I’m not sure what yet. Might just leave it there. Also may take the DG footswitch off - I find the volume jump when you want to turn the dirt channel on is pretty jarring (plus I like dirt before reverb), so that might just become another grit/gain stage pedal. Not sure yet. Edited February 8, 2019 by Finbar 1 Quote Link to comment Share on other sites More sharing options...
Al Krow Posted February 8, 2019 Share Posted February 8, 2019 @Finbar welcome back! Not sure why you get a volume jump on your DG M900 when engaging dirt? It's pretty easy to balance using the drive level in my experience. Quote Link to comment Share on other sites More sharing options...
Finbar Posted February 8, 2019 Share Posted February 8, 2019 It's the M500, not sure if it makes too much of a difference. To be fair, I've only used the footswitch at home, it's not been to the practice room yet. I've barely notched the master volume up past zero before it gets loud enough to bother neighbours. I have a feeling if I play with it a bit more at real volumes I'll work the levels out. I didn't buy the amp for its clean sound anyway, so it might just become a glorified Mute switch Quote Link to comment Share on other sites More sharing options...
lee650 Posted February 9, 2019 Share Posted February 9, 2019 (edited) Well after many months of tweaking and buying and selling I'm very happy with my current setup in the following signal chain! MXR Bass Envelope Filter 3 Leaf Pwnzor compressor Iron Ether Subterranea Cog Custom T65 octave (with the following in its loop, in order to run the octave in parallel) Iron Ether Oxide fuzz Malekko Scrutator (bit/sample/filter) Mooer Sweeper Then into! Cog Custom Grand Tarkin Fuzz Source Audio Manta Filter MXR Bass Chorus Deluxe MXR EVH Phase 90 TC Iron Curtain Noise gate Plenty of synthy goodness and all powered with a Cioks Dc5 😁 For once in not gassing too much for anything else! (Nose getting bigger) Edited February 9, 2019 by lee650 4 Quote Link to comment Share on other sites More sharing options...
GisserD Posted February 9, 2019 Share Posted February 9, 2019 6 hours ago, lee650 said: Well after many months of tweaking and buying and selling I'm very happy with my current setup in the following signal chain! MXR Bass Envelope Filter 3 Leaf Pwnzor compressor Iron Ether Subterranea Cog Custom T65 octave (with the following in its loop, in order to run the octave in parallel) Iron Ether Oxide fuzz Malekko Scrutator (bit/sample/filter) Mooer Sweeper Then into! Cog Custom Grand Tarkin Fuzz Source Audio Manta Filter MXR Bass Chorus Deluxe MXR EVH Phase 90 TC Iron Curtain Noise gate Plenty of synthy goodness and all powered with a Cioks Dc5 😁 For once in not gassing too much for anything else! (Nose getting bigger) Haha...What do you notice about the pedals in the T65 loop? Quote Link to comment Share on other sites More sharing options...
lee650 Posted February 9, 2019 Share Posted February 9, 2019 (edited) 1 hour ago, GisserD said: Haha...What do you notice about the pedals in the T65 loop? Lol!! I know,all 3 from you! You're my pusherman 😂 they sound fantastic though. Trying to decide whether to use the Scrutator in LP or BP mode! I quite liked the BP setting as its cleaner and I'm getting plenty bottom from the T65. Edited February 9, 2019 by lee650 Quote Link to comment Share on other sites More sharing options...
sifi2112 Posted February 9, 2019 Share Posted February 9, 2019 Looks good Lee650 ... so how about a little demo of the kind of various sounds you can get out of your setup ? Hoping video files can be added to threads Moderators ? This applies to all BCers with pedal boards, just think it would make this thread even better. (I’m awaiting some new switches for my ‘ramp’ pedal so I’ll post once new board complete lol) 2 Quote Link to comment Share on other sites More sharing options...
krispn Posted February 9, 2019 Share Posted February 9, 2019 @sifi2112 Yeah great suggestion! My interest isn't what's on the boards as much as the noises and sounds created with them and the context folks are using them in. I struggle to see where I need more than a bit of drive or eq so to see these 14 pedal behemoth boards I'm baffled - limited by my own tunnel vision no doubt - but I'm confident people are making far more interesting and textured noises than my brain could conjure up with the same wealth of tools! 3 Quote Link to comment Share on other sites More sharing options...
danny-79 Posted February 9, 2019 Share Posted February 9, 2019 20 hours ago, Jean-Luc Pickguard said: Here's my small pedalboard which contains everything I need [sfx] Micro Thumpinator TC Electronic Spectracomp Tech 21 VT Bass TC Electronic Spark mini booster powered from a caline CP-02 Just sold my vt-bass and mildly regret it. Cracking pedal 2 Quote Link to comment Share on other sites More sharing options...
.jpg.7e18f76540598a8efc0e6ca9be453059.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.