Al Krow Posted August 6, 2020 Share Posted August 6, 2020 On 17/07/2020 at 17:11, walshy said: Updated board for the upcoming gigs! Can’t wait to get back out there. New Ashdown rig and this board should see me through for a few years. !!! 😂 Will whoever has kidnapped our @walshy and stolen his BC log in details, please release him asap, otherwise international gear prices are going to plummet... 1 Quote Link to comment Share on other sites More sharing options...
ordep Posted August 7, 2020 Share Posted August 7, 2020 (edited) still waiting for some cables, but here is my lockdown board. The Future compact and Proton will be on the HX’s fx loop. Tuner-Octabvre-Pork n Pickle-Stomp-(fx loop)-Future Compact-Proton-(loop return)-Becos-Noble Edited August 19, 2020 by ordep 7 Quote Link to comment Share on other sites More sharing options...
Al Krow Posted August 7, 2020 Share Posted August 7, 2020 Nice board! And @GisserD's FI housing looks great! Quite a lot of filter and synth goodness on that board. Are you in a funk band? 1 Quote Link to comment Share on other sites More sharing options...
ordep Posted August 7, 2020 Share Posted August 7, 2020 use to play in a covers band playing disco, etc. and an originals band playing a bit of funk rock. Currently its main purpose is just to annoy the guitarist. 😄 Quote Link to comment Share on other sites More sharing options...
GisserD Posted August 7, 2020 Share Posted August 7, 2020 (edited) 6 hours ago, ordep said: still waiting for some cables, but here is my lockdown board. The Future compact and Proton will be on the HX’s fx loop. Tuner-Octabvre-Pork n Pickle-Stomp-(fx loop)-Future Compact-Proton-Becos-Noble Oh that is a tasty board! Whats that in the middle in the top row? Edited August 7, 2020 by GisserD Quote Link to comment Share on other sites More sharing options...
ordep Posted August 7, 2020 Share Posted August 7, 2020 1 hour ago, GisserD said: Oh that is a tasty board! Whats that in the middle in the top row? Thanks, its a 3LeafAudio Proton. 🙂 Quote Link to comment Share on other sites More sharing options...
Al Krow Posted August 7, 2020 Share Posted August 7, 2020 11 minutes ago, ordep said: Thanks, its a 3LeafAudio Proton. 🙂 We seem to have similar tastes 😀 - I've recently got the 2020 Proton, which I'm really liking, and a Helix (HX) and Becos (Stella) too. Although I suspect I'll never afford a Noble and have to make do and mend with a VT Bass DI! Is that a PT Metro 24 you've got them loaded on and what are you using for power? Quote Link to comment Share on other sites More sharing options...
lee650 Posted August 7, 2020 Share Posted August 7, 2020 2 hours ago, GisserD said: Oh that is a tasty board! Whats that in the middle in the top row? What's the reason painting out the graphics on the 3 leaf pedals? Custom job? 😁 Quote Link to comment Share on other sites More sharing options...
GisserD Posted August 7, 2020 Share Posted August 7, 2020 19 minutes ago, lee650 said: What's the reason painting out the graphics on the 3 leaf pedals? Custom job? 😁 To make it black of course!!!! And I'd do the same. Look at that thing! The whole guard is sexy as hell. In a kinky latex kinda way 😏 1 Quote Link to comment Share on other sites More sharing options...
Merton Posted August 7, 2020 Share Posted August 7, 2020 9 hours ago, ordep said: still waiting for some cables, but here is my lockdown board. The Future compact and Proton will be on the HX’s fx loop. Tuner-Octabvre-Pork n Pickle-Stomp-(fx loop)-Future Compact-Proton-Becos-Noble Saw this on Instagram earlier. Love the “none more black” look! Really need to try some of the 3leaf stuff... 1 Quote Link to comment Share on other sites More sharing options...
ordep Posted August 7, 2020 Share Posted August 7, 2020 1 hour ago, Al Krow said: We seem to have similar tastes 😀 - I've recently got the 2020 Proton, which I'm really liking, and a Helix (HX) and Becos (Stella) too. Although I suspect I'll never afford a Noble and have to make do and mend with a VT Bass DI! Is that a PT Metro 24 you've got them loaded on and what are you using for power? yes its a Metro 24. Planning to use a Diago 3000Mah psu/Gigrig isolator+distributor plus some joyo isolators I got if needed. I got this on order to power the Noble and Diago with one Kettle lead. 1 Quote Link to comment Share on other sites More sharing options...
ordep Posted August 7, 2020 Share Posted August 7, 2020 1 hour ago, lee650 said: What's the reason painting out the graphics on the 3 leaf pedals? Custom job? 😁 Just to make it match to the rest of the board really. Imagine it still being white and all. 😄 The Proton is just covered with sticker. 1 Quote Link to comment Share on other sites More sharing options...
AJ567 Posted August 8, 2020 Share Posted August 8, 2020 10 hours ago, ordep said: yes its a Metro 24. Planning to use a Diago 3000Mah psu/Gigrig isolator+distributor plus some joyo isolators I got if needed. I got this on order to power the Noble and Diago with one Kettle lead. Tidy solution! Quote Link to comment Share on other sites More sharing options...
lee650 Posted August 9, 2020 Share Posted August 9, 2020 On 07/08/2020 at 12:44, ordep said: still waiting for some cables, but here is my lockdown board. The Future compact and Proton will be on the HX’s fx loop. Tuner-Octabvre-Pork n Pickle-Stomp-(fx loop)-Future Compact-Proton-Becos-Noble I do fancy one of those pork & pickles! How do you like it? Quote Link to comment Share on other sites More sharing options...
ordep Posted August 9, 2020 Share Posted August 9, 2020 (edited) 18 minutes ago, lee650 said: I do fancy one of those pork & pickles! How do you like it? I really like it for what it can do. I use to run a VMT plus B3K combo, and I prefer the pork loin to the VMT. The B3K I can somehow emulate on the Helix so I didnt miss it. Plus I have the russian muff with blend from the P&P so that is a win. What I am actually trying to see is if I can modify the Pork and Pickle to convert the toggle switch to an external footswitch so I can switch between the OD and Fuzz mid song. 🙂 Edited August 9, 2020 by ordep Quote Link to comment Share on other sites More sharing options...
0175westwood29 Posted August 10, 2020 Share Posted August 10, 2020 its rough for sure and i need to compare the crimson to the Fuzzrocious Playing mantis, the space in the middle is probs gonna be a little di setup for a Meatbox Quote Link to comment Share on other sites More sharing options...
bobbass4k Posted August 12, 2020 Share Posted August 12, 2020 On 29/07/2020 at 23:14, Jonathan Bee said: what a beast!!!! Any sounds clips? 🙂 An extremely rough phone clip I accidently recorded - some silly textural guitar stuff I was messing about with trying to find sounds that work through an amp. The phone clip is actually useful cos you can hear the guitar acoustically too. 20200809_012404.m4a 1 Quote Link to comment Share on other sites More sharing options...
Jonathan Bee Posted August 12, 2020 Share Posted August 12, 2020 8 hours ago, bobbass4k said: An extremely rough phone clip I accidently recorded - some silly textural guitar stuff I was messing about with trying to find sounds that work through an amp. The phone clip is actually useful cos you can hear the guitar acoustically too. 20200809_012404.m4a 1.09 MB · 4 downloads Very trippy... from early morning bird song to the afore mentioned space whale song! Quote Link to comment Share on other sites More sharing options...
stewblack Posted August 13, 2020 Share Posted August 13, 2020 (edited) Needs pedals fixing, and a cable tidy but there it is. R to L = in to out. Joyo OJ - always on dirt and tone TPM - loop 1 = California Drive set up filthy but blended with the clean signal. TPM - loop 2 = Boss LS2 blended with clean signal. Boss LS2 - B loop = Ricochet dry + octave down, or 5th up. Boss LS2 - A loop = XVI octave up + clean + a smidgen of octave down GEQ - as and if needed. B1 Four - individual stomps Phaser, Flanger, Chorus Auto Wah, HPF (always on). Midi controller - select FI patches FI - all sorts from weird noises to filthy funk. Powered by Harley Benton PowerPlant Powerbank. Edited August 13, 2020 by stewblack 4 Quote Link to comment Share on other sites More sharing options...
ahpook Posted August 13, 2020 Share Posted August 13, 2020 (edited) Here's my current mess of cables. The hand-labelled ones are a Schalltechnik Vong-Filterung on the right and a Pumpernickel Compressor on the left. Thought I'd break out a bit of modulation at the top left for a bit of colour and after all, how sweet the sound of the flanged fuzz Edited August 13, 2020 by ahpook 2 Quote Link to comment Share on other sites More sharing options...
paulo m Posted August 15, 2020 Share Posted August 15, 2020 (edited) The Q Strip works really well..... Big suprise.. & this board is really quiet' very little noise' which is always a bonus!! ( Can some kind person please explain how the flip' to use the effects loop on the GR2!!) Thank Q in advance. Edited August 15, 2020 by paulo m 1 Quote Link to comment Share on other sites More sharing options...
AngelDeVille Posted August 16, 2020 Share Posted August 16, 2020 1 Quote Link to comment Share on other sites More sharing options...
lee650 Posted August 16, 2020 Share Posted August 16, 2020 (edited) 17 hours ago, paulo m said: The Q Strip works really well..... Big suprise.. & this board is really quiet' very little noise' which is always a bonus!! ( Can some kind person please explain how the flip' to use the effects loop on the GR2!!) Thank Q in advance. Hi Paulo An Envelope filter comprises of two sections. The envelope detector ( which receives your signal dynamics) ,and the filter section.The loop on the GR2 places any effects put in it inbetween these two sections,so that effects commonly used with filter (octave/fuzz) do not trigger the envelope detector thus causing the filter to open from your effect,rather than the dynamics of your playing. Take a cable from the effects send to the input of the first pedal then another cable from the last pedals output to the return. If you want to use the effects in the loop without the filter,make sure the GR2 is set to buffered bypass via the internal trimpot. I use a very similar setup, a nice trick will be to put your Cali 76/T16 and whatever drive in the loop,as the comp will work as it should when playing normally,however it won't limit the dynamics when using the filter. It sounds huge with the T16 very synthy,My board is a bit further up this thread if you'd like a look and I have the bulk of my pedals in the wonderlove loop. How are you using the Q strip (as an additional EQ/DI?) As your EBS has really nice loop built in,which means you can put your fx into it and helps with signal purity. If you put it at the front of your chain, you'd be able to use it as a pre amp and an A/B switcher (although I realise the boss pedalboard has a built in fx loop for that purpose,and you won't be able to use the A/B facility) I'd move the HOF to after the GR2 too 😁 Edited August 16, 2020 by lee650 1 Quote Link to comment Share on other sites More sharing options...
Si600 Posted August 16, 2020 Share Posted August 16, 2020 Should Not Go Shopping, Should Not Go Shopping... A bit of remodeling after the new purchase. New wooden triangles with a socket mounted under as the Ciocks, which you can't see, won't power the B3n. The clock is fine as is, but the footswitch for the GK amp needs some support. The lid is a bit stiff to get on as well, but that's only for transport anyway. 3 Quote Link to comment Share on other sites More sharing options...
paulo m Posted August 16, 2020 Share Posted August 16, 2020 (edited) 6 hours ago, lee650 said: Hi Paulo An Envelope filter comprises of two sections. The envelope detector ( which receives your signal dynamics) ,and the filter section.The loop on the GR2 places any effects put in it inbetween these two sections,so that effects commonly used with filter (octave/fuzz) do not trigger the envelope detector thus causing the filter to open from your effect,rather than the dynamics of your playing. Take a cable from the effects send to the input of the first pedal then another cable from the last pedals output to the return. If you want to use the effects in the loop without the filter,make sure the GR2 is set to buffered bypass via the internal trimpot. I use a very similar setup, a nice trick will be to put your Cali 76/T16 and whatever drive in the loop,as the comp will work as it should when playing normally,however it won't limit the dynamics when using the filter. It sounds huge with the T16 very synthy,My board is a bit further up this thread if you'd like a look and I have the bulk of my pedals in the wonderlove loop. How are you using the Q strip (as an additional EQ/DI?) As your EBS has really nice loop built in,which means you can put your fx into it and helps with signal purity. If you put it at the front of your chain, you'd be able to use it as a pre amp and an A/B switcher (although I realise the boss pedalboard has a built in fx loop for that purpose,and you won't be able to use the A/B facility) I'd move the HOF to after the GR2 too 😁 Hi Lee' firstly thankyou for your reply most informative & very interesting as to how to utilise & get another performance out of these pedals. The Q Strip is additional E Q & is a very accurate one also' I use the H P F & the L P F on the unit when I'm playing through my smaller combo's a SWR Spellbinder Blue or' a SWR Basic Black to filter out those lower frequencies when using the Octave especially'. The HOF I use infrequently mainly with a fretless & the tone prints in the Chorus... which work well together. I shall experiment with your suggestions & maybe even reconfigure the board ' Thanks again for your input most kind' Paulo. Edited August 16, 2020 by paulo m Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.