Salt on your Bass? Posted July 4, 2021 Share Posted July 4, 2021 (edited) On 04/07/2021 at 13:06, jimbobothy said: … you have a gap, have you decided what can go there yet 😁. That's why I'd like a smaller board....to stop that kinda talk!! 😂 ....but there's always a cab SIM/DI or put the freeze back on for a laugh.... Edited July 5, 2021 by Salt on your Bass? 1 Quote Link to comment Share on other sites More sharing options...
adamg67 Posted July 4, 2021 Share Posted July 4, 2021 5 hours ago, garyt said: Are those your normal settings on the Hyper Luminal? I have the blend and time about 2 o’clock, level to suit, compression at noon. Ratio on 2 or 3. SYM. but I can’t stop playing with it, as this pedal has so much variety. Sort of tempted by the FET ‘all-in’ setting. They're rough and ready settings, I still need to have a proper session to get it properly dialled in. I do remember liking the FET mode last time I played with it though. I'll try and remember to post what I end up with. Quote Link to comment Share on other sites More sharing options...
Stub Mandrel Posted July 5, 2021 Share Posted July 5, 2021 A new, relaxed and simplified layout for my pedalboard with about 40% of the pedals removed. Not sure many gigs will need the HM2, but it's a position where I can easily drop in either a modulation pedal or my tube screamer clone. Might swap over the gumpinator and the XVI without changing the order. Plenty of room to add back my loop switcher if needed. 1 Quote Link to comment Share on other sites More sharing options...
danbowskill Posted July 5, 2021 Share Posted July 5, 2021 (edited) The Hyperdrive into the B3k.... Easily the best drive sound ive ever had (ive had so so many), they were totally made for each other.the hyperdrive just does something magic to the clean lows and with having just the mids driven... Alongside the darkglass makes it so articulate and punchy. The ashdown doesnt do much played alone.... But wow i highly recommended the two together . Now if someone in the DIY section could make me one in a smaller box version (without the silly vu meter) 👌 Edited July 5, 2021 by danbowskill 1 Quote Link to comment Share on other sites More sharing options...
stewblack Posted July 5, 2021 Share Posted July 5, 2021 Here we go. Very nearly, or perhaps actually, there. Just finished wiring it up after using it on Saturday. Can't choose between the MXR and the Fwonkbeta so I'll have both. No compression because the amps do that pretty well. The Behringer OD is simply the best for an always on bit of dirt that I've found, and the Joyo boost kicks it up when I need real filth. Everything is in the loop of the SY-1 so the synth is unaffected by the rest. The Mr Black phaser edged out the competition from Behringer and Fender. 4 Quote Link to comment Share on other sites More sharing options...
dand666 Posted July 6, 2021 Share Posted July 6, 2021 Best patch leads to get? Ideally nice and thin but not too pricey. Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted July 6, 2021 Share Posted July 6, 2021 43 minutes ago, dand666 said: Best patch leads to get? Ideally nice and thin but not too pricey. I used to be all about the Lava Cables and George L's, but I've moved over to EBS flat patch (gold version, but I'm sure the regular are fine). Personally, I'm super impressed with them. 2 1 Quote Link to comment Share on other sites More sharing options...
Witch Hazel Posted July 6, 2021 Share Posted July 6, 2021 talking about cables, has anyone tried the fixed "coupler" type pedal connectors like these? i'm imagining they're probably really annoying when the connectors don't quite line up properly (which a couple of the reviews mentioned), but i'm tempted to get some to try. Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted July 6, 2021 Share Posted July 6, 2021 (edited) 4 minutes ago, Witch Hazel said: talking about cables, has anyone tried the fixed "coupler" type pedal connectors like these? i'm imagining they're probably really annoying when the connectors don't quite line up properly (which a couple of the reviews mentioned), but i'm tempted to get some to try. These are notoriously bad for your jack sockets as it forces pedals to bend and flex against each other and the weight of the plug. With a cable, when pressure is applied to a pedal and it slightly moves, the cable prevents anything else from moving with it. With a coupler, that force is directly applied to the jack sockets of the connected pedals. I’ve heard nothing but bad things about them, though I admit, I’ve never tried them myself (on account of them historically being considered a poor choice). Edited July 6, 2021 by pantherairsoft 4 Quote Link to comment Share on other sites More sharing options...
Witch Hazel Posted July 6, 2021 Share Posted July 6, 2021 2 minutes ago, pantherairsoft said: These are notoriously bad for your jack sockets as it forces pedals to bend and flex against each other and the weight of the plug. oh, that makes a lot of sense. i'll give those a miss then, thanks! 1 Quote Link to comment Share on other sites More sharing options...
Witch Hazel Posted July 6, 2021 Share Posted July 6, 2021 and in the spirit of the thread, here's my rather meagre pedalboard (with EBS cables): as you can probably tell it's a bit of a work in progress! i've got a fair number of things planned to add, hence the oversized board. (i bought the board, a Pedaltrain Classic 1, with the "soft case" option thinking it would be some sort of padded gig bag type thing - imagine my surprise when the case turned out to be an actual suitcase. no complaints though, i'm pretty sure it'll keep everything safe.) 1 Quote Link to comment Share on other sites More sharing options...
Stub Mandrel Posted July 6, 2021 Share Posted July 6, 2021 1 hour ago, Witch Hazel said: talking about cables, has anyone tried the fixed "coupler" type pedal connectors like these? i'm imagining they're probably really annoying when the connectors don't quite line up properly (which a couple of the reviews mentioned), but i'm tempted to get some to try. About thirty years ago, I still have a couple. The offset ones line up fine. Where they fall down is if you use them to create a line of free-standing pedals so easy to pull one out, damage a connection or bend a plug. Might work better with pedalboards. Quote Link to comment Share on other sites More sharing options...
Aliwobble Posted July 7, 2021 Share Posted July 7, 2021 Small but mighty is a bit of a theme lately. Here’s my most recent effort for a small (nano+) gigworthy board with no compromises in tone. Wireless > microbass > corona (in fx loop). All powered by a strymon Zuma. 3 Quote Link to comment Share on other sites More sharing options...
hemdee666 Posted July 9, 2021 Share Posted July 9, 2021 Minimalistic pedal board. Since I got a TE RAH400SMX, no need for anything else. This does all I want it to do (for now…) Grtz, Marc. 2 Quote Link to comment Share on other sites More sharing options...
bassfan Posted July 9, 2021 Share Posted July 9, 2021 My latest incarnation... pedals in the effects loop of the Stomp. 8 Quote Link to comment Share on other sites More sharing options...
Al Krow Posted July 9, 2021 Share Posted July 9, 2021 4 hours ago, bassfan said: My latest incarnation... pedals in the effects loop of the Stomp. Your finest board ever, dare I say Mr Bassfan! 2 Quote Link to comment Share on other sites More sharing options...
bassfan Posted July 9, 2021 Share Posted July 9, 2021 (edited) 11 hours ago, Al Krow said: Your finest board ever, dare I say Mr Bassfan! Thanks. I think so to. There may be room for a tweak or 2. 😃 Edited July 10, 2021 by bassfan 1 Quote Link to comment Share on other sites More sharing options...
stewblack Posted July 9, 2021 Share Posted July 9, 2021 6 hours ago, hemdee666 said: Minimalistic pedal board. Since I got a TE RAH400SMX, no need for anything else. This does all I want it to do (for now…) Grtz, Marc. What does a vitalizer do? PS. Love the minimalism 1 Quote Link to comment Share on other sites More sharing options...
hemdee666 Posted July 10, 2021 Share Posted July 10, 2021 Hi @stewblack, a vitaliser is just a buffered signal input/output to solve signal loss or noise issues. And it makes my sound more… my sound, but fatter, rounder, more define. Nice piece of kit. It’s difficult to explain otherwise. Hope this is useful…. Grtz, Marc. 1 Quote Link to comment Share on other sites More sharing options...
prowla Posted July 15, 2021 Share Posted July 15, 2021 (edited) My latest iteration... The signal path is Microbass 3 Fx loop to QM6. QM6 loops:: C4 (I may put a TC compressor in front of the C4, to calm down my Ric's clatter and things; it'll fit in the gap above the DMC MIDI switch there). DHA. Phaser & Chorus. Flashback. Unused (it's an unused on/off control switch, not a loop). Ditto. The C4 has replaced Octave Up (EH Mosaic) & Down (EBS Octabass) pedals, but I need to program it yet. Edited July 16, 2021 by prowla 2 Quote Link to comment Share on other sites More sharing options...
dand666 Posted July 15, 2021 Share Posted July 15, 2021 (edited) Hi Guys, Question on a signal path for you. So new to pedals it's crazy. So I have a Aguilar TH, a Cali76 Compressor and a Shure GLXD wireless unit. What would be the chain? The wireless unit is throwing me off lol Edited July 15, 2021 by dand666 Quote Link to comment Share on other sites More sharing options...
bassfan Posted July 15, 2021 Share Posted July 15, 2021 6 minutes ago, dand666 said: Hi Guys, Question on a signal path for you. So new to pedals it's crazy. So I have a Aguilar TH, a Cali76 Compressor and a Shure GLXD wireless unit. What would be the chain? The wireless unit is throwing me off lol I’m guessing the TH is the pedal and not the amp? GLXD-> compressor-> TH 3 Quote Link to comment Share on other sites More sharing options...
dand666 Posted July 15, 2021 Share Posted July 15, 2021 Yeah the Pedal 🙂 Quote Link to comment Share on other sites More sharing options...
dand666 Posted July 15, 2021 Share Posted July 15, 2021 25 minutes ago, bassfan said: I’m guessing the TH is the pedal and not the amp? GLXD-> compressor-> TH So Amp to the GLXD to Comp to the TH Pedal? Quote Link to comment Share on other sites More sharing options...
bassfan Posted July 15, 2021 Share Posted July 15, 2021 18 minutes ago, dand666 said: So Amp to the GLXD to Comp to the TH Pedal? Bass - wireless - compressor - TH - amp. Unless you are running the effects into the effects loop of your amp in which case wireless into amp comp & TH into effects loop but I’m guessing you are going straight into the main input of your amp. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.