Rob Bisby Posted July 17, 2022 Share Posted July 17, 2022 Picked up a sonicake boomave, it sounds great put radial DI on the board incase sound guys ever want clean bass Quote Link to comment Share on other sites More sharing options...
chris7273 Posted July 18, 2022 Share Posted July 18, 2022 (edited) 10 hours ago, funkydoug said: What’s the case / board . That looks brilliant Thank you i built it, sourcing parts from Thomann and Aliexpress. The case Is made of cheap 12mm plywood from the diy store a lot of sanding (sadly not enough), one coat of sealer and two coats of black paint. i glued some fabric on the inner sides. Edited July 18, 2022 by chris7273 1 Quote Link to comment Share on other sites More sharing options...
skidder652003 Posted July 18, 2022 Share Posted July 18, 2022 (edited) my latest setup. Edited July 18, 2022 by skidder652003 Quote Link to comment Share on other sites More sharing options...
funkydoug Posted July 18, 2022 Share Posted July 18, 2022 1 hour ago, chris7273 said: Thank you i built it, sourcing parts from Thomann and Aliexpress. The case Is made of cheap 12mm plywood from the diy store a lot of sanding (sadly not enough), one coat of sealer and two coats of black paint. i glued some fabric on the inner sides. Excellent work! 1 Quote Link to comment Share on other sites More sharing options...
stewblack Posted July 18, 2022 Share Posted July 18, 2022 My working board for Bandeoke gigs. Never know what's coming, so I need simplicity and flexibility. The graphic is used as a boost (or a cut in this shot as I'm using it at home) The American sound always on to dirty up the basic sound. I never leave home without an octave, the synth and wah may be used if that kind of tune comes up. The boost kicks the American sound into a bit more dirt, the Splinter is for when I want to bring the ceiling down. 3 Quote Link to comment Share on other sites More sharing options...
danbowskill Posted July 18, 2022 Share Posted July 18, 2022 Just now, stewblack said: My working board for Bandeoke gigs. Never know what's coming, so I need simplicity and flexibility. The graphic is used as a boost (or a cut in this shot as I'm using it at home) The American sound always on to dirty up the basic sound. I never leave home without an octave, the synth and wah may be used if that kind of tune comes up. The boost kicks the American sound into a bit more dirt, the Splinter is for when I want to bring the ceiling down. Whats the low end like on the splinter? Like the bass demos out there Quote Link to comment Share on other sites More sharing options...
stewblack Posted July 18, 2022 Share Posted July 18, 2022 On 11/07/2022 at 20:49, chris7273 said: Do I dare to post after this spectacular pedalboard ? made myself. Not perfect but really happy 🙂 Oh man - that's awesome 1 Quote Link to comment Share on other sites More sharing options...
stewblack Posted July 18, 2022 Share Posted July 18, 2022 1 minute ago, danbowskill said: Whats the low end like on the splinter? Like the bass demos out there Sounds great to me! 2 Quote Link to comment Share on other sites More sharing options...
chris7273 Posted July 18, 2022 Share Posted July 18, 2022 6 hours ago, stewblack said: Oh man - that's awesome Thank you. are you happy with the wireless HB ? Do you use it for gigging ? Quote Link to comment Share on other sites More sharing options...
stewblack Posted July 18, 2022 Share Posted July 18, 2022 1 hour ago, chris7273 said: Thank you. are you happy with the wireless HB ? Do you use it for gigging ? Yes absolutely. The docking/recharging part is a little big, but it is a tuner also so saves having a separate one on the board. 1 Quote Link to comment Share on other sites More sharing options...
0175westwood29 Posted July 20, 2022 Share Posted July 20, 2022 Walrus audio Lore and boss pw2 added to the board and I mean it’s kinda a pedal the pk5-a ? 3 Quote Link to comment Share on other sites More sharing options...
Boodang Posted July 22, 2022 Share Posted July 22, 2022 This is the 'funky ball of teats' board with three envelope filters. The Bright Onion pedals are custom switchers, the orange one for selecting an input to the board and the yellow is an A/B/Y which has the Octamizer and Fwonkbeta connected. All patch leads are EBS flat and taken under the board to keep it clean although in fairness, underneath is a tad busy. 6 1 Quote Link to comment Share on other sites More sharing options...
eude Posted July 22, 2022 Share Posted July 22, 2022 17 minutes ago, Boodang said: 'funky ball of teats' Love a Boosh reference. Nice board too dude! Quote Link to comment Share on other sites More sharing options...
Al Krow Posted July 29, 2022 Share Posted July 29, 2022 (edited) Upsized my little HB 50M board to a Warwick Rockboard 3.2, powered by an HB Iso Pro 12 which comfortably slots underneath: Signal chains Main: Boss WL-20 (wireless) --> Thumpinator (hpf) --> Boss OC5 --> Boss SY200 (+exp. pedal) --> Octava (drive/fuzz) --> HG 4K (drive) --> Zoom B1-4 (multifx) --> 3Leaf Proton Mk4 --> VTDI --> 1/4" out / DI out; Side 1: Beat buddy --> aux in of Zoom B1-4 (=> drums unaffected by most of the fx including the B1-4's own fx); Side 2: VTDI parallel out (clean by-pass) --> Boss RC5. Edited July 30, 2022 by Al Krow 7 Quote Link to comment Share on other sites More sharing options...
Rob Bisby Posted July 30, 2022 Share Posted July 30, 2022 New setup, the chain is.. Pitchblack > sonicake boom ave > lazy bear passive blender Send FX loop > tone city Mickey > murder one kill switch > blender I'm in a three piece band where I have to fill in for guitar aswell when guitarist is soloing Quote Link to comment Share on other sites More sharing options...
lee650 Posted July 30, 2022 Share Posted July 30, 2022 On 22/07/2022 at 20:30, Boodang said: This is the 'funky ball of teats' board with three envelope filters. The Bright Onion pedals are custom switchers, the orange one for selecting an input to the board and the yellow is an A/B/Y which has the Octamizer and Fwonkbeta connected. All patch leads are EBS flat and taken under the board to keep it clean although in fairness, underneath is a tad busy. I love that board! Quote Link to comment Share on other sites More sharing options...
thisisswanbon Posted August 4, 2022 Share Posted August 4, 2022 Far less exciting than the other boards on this thread, but it's taken a lot of swapping and changing (and pedals being moved on at a loss) to come to this set up, and I'm finally happy (for now!) 2 Quote Link to comment Share on other sites More sharing options...
Rob Bisby Posted August 4, 2022 Share Posted August 4, 2022 Got more flat cables and added DI box in for distorted channel 👍 much neater 2 Quote Link to comment Share on other sites More sharing options...
Teebs Posted August 4, 2022 Share Posted August 4, 2022 Gig board... 1 Quote Link to comment Share on other sites More sharing options...
bassist_lewis Posted August 5, 2022 Share Posted August 5, 2022 20 hours ago, thisisswanbon said: Far less exciting than the other boards on this thread, but it's taken a lot of swapping and changing (and pedals being moved on at a loss) to come to this set up, and I'm finally happy (for now!) I think its great minimalist no bulls**t setup. All basses covered: octave (mega jealous of the octabvre mini btw), filter (C4 is a filter?), fuzz, overdrive, comp, tuner. I wish I could be so discerning! Quote Link to comment Share on other sites More sharing options...
thisisswanbon Posted August 5, 2022 Share Posted August 5, 2022 (edited) 20 minutes ago, bassist_lewis said: I think its great minimalist no bulls**t setup. All basses covered: octave (mega jealous of the octabvre mini btw), filter (C4 is a filter?), fuzz, overdrive, comp, tuner. I wish I could be so discerning! Thanks Lewis! I've tried absolutely all sorts including going the helix route... but the cheaper analogue EHX stuff does it for me to be honest. The octabvre mini is a dream, I use it solo'd for a fair chunk of our set. Between that and the C4, I seldom use a dry bass sound. My C4 covers filters, a more bass heavy sub octave than the octabvre, tremelo and saw wave stuff as well as some FM synth stuff... it's marvellous! Our latest promo (hopefully below). Was done first half C4, second half octabvre. Edited August 5, 2022 by thisisswanbon 3 Quote Link to comment Share on other sites More sharing options...
Bassmidget209 Posted August 5, 2022 Share Posted August 5, 2022 4 hours ago, thisisswanbon said: Thanks Lewis! I've tried absolutely all sorts including going the helix route... but the cheaper analogue EHX stuff does it for me to be honest. The octabvre mini is a dream, I use it solo'd for a fair chunk of our set. Between that and the C4, I seldom use a dry bass sound. My C4 covers filters, a more bass heavy sub octave than the octabvre, tremelo and saw wave stuff as well as some FM synth stuff... it's marvellous! Our latest promo (hopefully below). Was done first half C4, second half octabvre. This is awesome, I keep desperately wanting to be able to make my bass into a synth. Unfortunately I play in a rock band with rather limited scope for techno bass textures. Doesn't stop me trying though 😂😂 1 2 Quote Link to comment Share on other sites More sharing options...
thisisswanbon Posted August 5, 2022 Share Posted August 5, 2022 57 minutes ago, Bassmidget209 said: This is awesome, I keep desperately wanting to be able to make my bass into a synth. Unfortunately I play in a rock band with rather limited scope for techno bass textures. Doesn't stop me trying though 😂😂 Thanks man! I can see why your rock band don't want you doing synth stuff, but you're totally missing out! I have more fun playing synth stuff then the normal bass stuff! You'll always hear the arguement of "all you need is a bass, a cable and an amp"... But I couldn't do a lot of this stuff with that set up 🤣 Quote Link to comment Share on other sites More sharing options...
Franticsmurf Posted August 5, 2022 Share Posted August 5, 2022 2 hours ago, Bassmidget209 said: Unfortunately I play in a rock band with rather limited scope for techno bass textures. Doesn't stop me trying though 😂😂 I feel your pain. Me too. One day I'll sneak some bass synth in when no one is looking. 😀 Quote Link to comment Share on other sites More sharing options...
Rick05 Posted August 5, 2022 Share Posted August 5, 2022 Finally decided to take the plunge and get a Justin Chancellor Wah pedal and got to on the board today. Can’t wait to let this loose in a band practise. Hopefully it’s worth the extra weight carrying it around 6 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.