Spewy Posted February 15, 2023 Share Posted February 15, 2023 Finally got myself the ADAM, it’s pretty much made everything else redundant 3 Quote Link to comment Share on other sites More sharing options...
EmmettC Posted February 16, 2023 Share Posted February 16, 2023 I think it's done. To make the Capo work as a di, I made a little patch cable with a low profile xlr, so to plug into the pa there's an xlr socket at the side of the board beside the output jack for the amp. It's very much an all purpose board, mainly for my wedding band, but also a blues rock original and an industrial band. It covers it all pretty well, having 2 eqs makes it easy to swap between bass guitar and upright without too much hassle.... 10 Quote Link to comment Share on other sites More sharing options...
TeresaFR Posted February 17, 2023 Share Posted February 17, 2023 On 11/02/2023 at 14:54, SonnyBassPlayer said: I took the time to take a pair of pics after following this thread for ages - this is my pedalboard, a Nano+ powered by a TRex Fuel Tank JR underneath (with feet lightly raised) I use this one on various projects and give it a few add-ons for specific gigs The base/main shape/main band version of it is this one: Polytune2 noir mini EHX Holy Grail EHX Bass Clone Fairfield Circuitry Barbershop Fairfield Circuitry Modéle B The Pedaltrain itself, the power bank, the TC Polytune and the Barbershop have been together in this since 2016. Once I found the Modéle B (which is an always on Barberhsop) I stacked them resulting in a distortion grain i love. The chorus and reverb are bridged with a modded Ikea tool for some parts of my main band and I love the tone they get together. When I play with another act I stick a loaned B7K, and when I play in my acoustic duo I add a Tech21 for clean guitar and the Boss DD-3 for a guitar part also. This is the largest board I had, at the time (2017-2020) I had a post-rock/desert instrumental trio and I knew no clean at all.. good memories (I still have all the gear, it's just... in drawers. Sigh) May I ask why the depth is set so lightly on the Bass Clone, please? Quote Link to comment Share on other sites More sharing options...
SonnyBassPlayer Posted February 17, 2023 Share Posted February 17, 2023 33 minutes ago, TeresaFR said: May I ask why the depth is set so lightly on the Bass Clone, please? Sure!! It's because I like the overall color of the effect, I don't actually like it oscillating too much or being too upfront I only use the chorus together with reverb as a matter of fact, but I use the reverb by itself quite some times Quote Link to comment Share on other sites More sharing options...
thisisswanbon Posted February 17, 2023 Share Posted February 17, 2023 18 hours ago, EmmettC said: I think it's done. To make the Capo work as a di, I made a little patch cable with a low profile xlr, so to plug into the pa there's an xlr socket at the side of the board beside the output jack for the amp. It's very much an all purpose board, mainly for my wedding band, but also a blues rock original and an industrial band. It covers it all pretty well, having 2 eqs makes it easy to swap between bass guitar and upright without too much hassle.... Wow! That's an impressive board! How do you find the new Darkglass Fuzz? Does it do the gated fuzz type thing? Quote Link to comment Share on other sites More sharing options...
EmmettC Posted February 17, 2023 Share Posted February 17, 2023 1 hour ago, thisisswanbon said: Wow! That's an impressive board! How do you find the new Darkglass Fuzz? Does it do the gated fuzz type thing? It does a bit, it's a nice pedal and really versatile. The down side is it does a lot of things pretty well, but it's not the best at anything. I do like that it does a lot and that it's so small. The Source Audio Chorus is overkill for what I need, I might swap that out for something simpler and smaller to make room for a different fuzz. 1 Quote Link to comment Share on other sites More sharing options...
Rob Bisby Posted February 21, 2023 Share Posted February 21, 2023 Had abit of a switch about 2 Quote Link to comment Share on other sites More sharing options...
TeresaFR Posted February 22, 2023 Share Posted February 22, 2023 On 17/02/2023 at 10:14, SonnyBassPlayer said: Sure!! It's because I like the overall color of the effect, I don't actually like it oscillating too much or being too upfront I only use the chorus together with reverb as a matter of fact, but I use the reverb by itself quite some times Have you tried depth all the way up and rate down real light? With the x-over in up position? 1 Quote Link to comment Share on other sites More sharing options...
Franticsmurf Posted February 22, 2023 Share Posted February 22, 2023 15 hours ago, Rob Bisby said: Had abit of a switch about I acquired an Ultra Octaver late last year. It's not made the final board yet (it's bigger than the mini pedal it is going to replace) but I like the sound I'm getting from it. 1 Quote Link to comment Share on other sites More sharing options...
SonnyBassPlayer Posted February 22, 2023 Share Posted February 22, 2023 13 hours ago, TeresaFR said: Have you tried depth all the way up and rate down real light? With the x-over in up position? I doubt I tried this one - will do, thanks!! 1 Quote Link to comment Share on other sites More sharing options...
Rob Bisby Posted February 22, 2023 Share Posted February 22, 2023 4 hours ago, Franticsmurf said: I acquired an Ultra Octaver late last year. It's not made the final board yet (it's bigger than the mini pedal it is going to replace) but I like the sound I'm getting from it. I only really use it for one song so it's good enough for me Quote Link to comment Share on other sites More sharing options...
lonestar Posted February 22, 2023 Share Posted February 22, 2023 Here is my little board. Now with “extra melodic richness” with the addition of the EHX Bass Clone, which arrived yesterday courtesy of @glenalli of this parish. I tried it briefly last night at a rehearsal. I’m really impressed with it. 6 Quote Link to comment Share on other sites More sharing options...
LukeFRC Posted February 22, 2023 Share Posted February 22, 2023 (edited) my first board! So for years - no pedals, or a few and then sell… nicest sound I ever had was a hellborg preamp which was a bit big to take as a pedal… I loved the sound though Then a Zoom B3 which was nice, but got sold Then a Zoom B3n which stayed for a while - mainly playing at church will all in ears setup … so amp modelling is good Then a HX stomp for years but the more I played the more I refined “my sound” down to comp> amp model> HPF/LPF acting as a cab sim and then di out one footswitch for a drive the other for chorus sometimes synth patch ”I could simplify this down and avoid screens and swearing trying to set my gain staging in this box” I thought “it might be cheaper” I thought it wasn’t. But @krispnpointed me in the direction of a colourbox for the transformer channel strip thing I like … and then two big pedals and two power supplies was a bit of a pain wasn’t it… so a change was afoot, @jimbobothy helped convince me of the best approach … the soldering iron came out and much time and more £££ than I want to think about it all works! pedal chain for the one person who reads on after the photo… tuner Source audio C4 synth (plus the Adafruit based preset switcher - ain’t pretty but was cheap) Broughton Omnicomp (optical compressor, sounds nice) “Irn bru” barbershop clone (I don’t like many overdrives on bass - love this) John K mini XO ( crossover drive pedal set up fuzzy and aggressive - thanks to @binky_basswho picked it up from the recycling forum on here broken and kindly passed it on) Frog FX1 preamp - (alembic/fender showman preamp in a box, using a early 50’s telefunken ECC82 running at a scary 180v) tech21 bass boost chorus (very lush) shallow water clone (tape effect random chorus envelope filter thing, sounds great, very sensitive to input gain) Vong filtrung - set up so the HPF on, LPF is footswitchable, and volume knob is to set the input into… JHS colourbox v2 - which to be honest is the pedal despite all the rubbish before it! All a bit over the top for a basic tone needs but it does sound good - esp with the valve preamp, it just sounds warmer and punchier at the same time edit: voodoo labs small ex board and Cioks dc7 underneath Edited February 22, 2023 by LukeFRC 14 Quote Link to comment Share on other sites More sharing options...
lee650 Posted February 23, 2023 Share Posted February 23, 2023 I'm in two bands, one an Instrumental Prog Rock/Synthwave fusion band, that's uses the big board thst you've all seen. I'm also in a Rock/Soul covers band. That just needs some basics, PITA to keep moving pedals, but I can't afford to double them up. But looking to start a dedicated little board. In tge meantime here's the little Rock board 😁 6 Quote Link to comment Share on other sites More sharing options...
krispn Posted February 23, 2023 Share Posted February 23, 2023 (edited) 7 hours ago, LukeFRC said: my first board! So for years - no pedals, or a few and then sell… nicest sound I ever had was a hellborg preamp which was a bit big it wasn’t. But @krispnpointed me in the direction of a colourbox for the transformer channel strip thing I like … and then two big pedals and two power supplies was a bit of a pain wasn’t it… so a change was afoot, @jimbobothy helped convince me of the best approach … the soldering iron came out and much time and more £££ than I want to think about it all works! You’re welcome ☺️ The Colourbox is great and really adds thickness - mine has to go back to JHS for a fix as it’s developed a noise issue but it should be a straightforward tweak/repair. Got some Lightening Boy Audio 2020s passive transformer units which really come to life once hitting them with some gain/boost. A couple of those 2020s’ in combination with a SGGX Beta sound gloriously phat! Also got them hooked up in my signal path and you can hear the mojo. Edited February 23, 2023 by krispn 2 Quote Link to comment Share on other sites More sharing options...
thisisswanbon Posted February 23, 2023 Share Posted February 23, 2023 8 hours ago, LukeFRC said: my first board! So for years - no pedals, or a few and then sell… nicest sound I ever had was a hellborg preamp which was a bit big to take as a pedal… I loved the sound though Then a Zoom B3 which was nice, but got sold Then a Zoom B3n which stayed for a while - mainly playing at church will all in ears setup … so amp modelling is good Then a HX stomp for years but the more I played the more I refined “my sound” down to comp> amp model> HPF/LPF acting as a cab sim and then di out one footswitch for a drive the other for chorus sometimes synth patch ”I could simplify this down and avoid screens and swearing trying to set my gain staging in this box” I thought “it might be cheaper” I thought it wasn’t. But @krispnpointed me in the direction of a colourbox for the transformer channel strip thing I like … and then two big pedals and two power supplies was a bit of a pain wasn’t it… so a change was afoot, @jimbobothy helped convince me of the best approach … the soldering iron came out and much time and more £££ than I want to think about it all works! pedal chain for the one person who reads on after the photo… tuner Source audio C4 synth (plus the Adafruit based preset switcher - ain’t pretty but was cheap) Broughton Omnicomp (optical compressor, sounds nice) “Irn bru” barbershop clone (I don’t like many overdrives on bass - love this) John K mini XO ( crossover drive pedal set up fuzzy and aggressive - thanks to @binky_basswho picked it up from the recycling forum on here broken and kindly passed it on) Frog FX1 preamp - (alembic/fender showman preamp in a box, using a early 50’s telefunken ECC82 running at a scary 180v) tech21 bass boost chorus (very lush) shallow water clone (tape effect random chorus envelope filter thing, sounds great, very sensitive to input gain) Vong filtrung - set up so the HPF on, LPF is footswitchable, and volume knob is to set the input into… JHS colourbox v2 - which to be honest is the pedal despite all the rubbish before it! All a bit over the top for a basic tone needs but it does sound good - esp with the valve preamp, it just sounds warmer and punchier at the same time edit: voodoo labs small ex board and Cioks dc7 underneath I had a similar experience with the HX stomp... your board looks far better than mine though! Did the Adafruit require any sort of midi host? Quote Link to comment Share on other sites More sharing options...
LukeFRC Posted February 23, 2023 Share Posted February 23, 2023 8 minutes ago, thisisswanbon said: I had a similar experience with the HX stomp... your board looks far better than mine though! Did the Adafruit require any sort of midi host? It’s the trinket m0 so it can act as a midi host - there’s two socket on the pedal a USB power in from the Cioks and the Adafruit out to the C4 code was done by someone else and I found on GitHub hardest thing was the metalwork! Quote Link to comment Share on other sites More sharing options...
thisisswanbon Posted February 23, 2023 Share Posted February 23, 2023 2 hours ago, LukeFRC said: It’s the trinket m0 so it can act as a midi host - there’s two socket on the pedal a USB power in from the Cioks and the Adafruit out to the C4 code was done by someone else and I found on GitHub hardest thing was the metalwork! Wow, that sounds very involved though; far too much for my tiny brain to comprehend... I was hoping you'd found an off the shelf alternative to the Disaster area stuff. Quote Link to comment Share on other sites More sharing options...
LukeFRC Posted February 23, 2023 Share Posted February 23, 2023 5 hours ago, thisisswanbon said: Wow, that sounds very involved though; far too much for my tiny brain to comprehend... I was hoping you'd found an off the shelf alternative to the Disaster area stuff. It is off the shelf … it just comes in multiple parts and needs code installing on it! 2 Quote Link to comment Share on other sites More sharing options...
keziahj Posted February 23, 2023 Share Posted February 23, 2023 A slightly different setup - I need a second EXP for the Mix of the Dynamic Hall, there is no way around it. 🥴🙂 4 Quote Link to comment Share on other sites More sharing options...
thisisswanbon Posted February 23, 2023 Share Posted February 23, 2023 2 hours ago, LukeFRC said: It is off the shelf … it just comes in multiple parts and needs code installing on it! I'll rephrase... "Off the shelf for idiots" Quote Link to comment Share on other sites More sharing options...
LukeFRC Posted February 23, 2023 Share Posted February 23, 2023 5 minutes ago, thisisswanbon said: I'll rephrase... "Off the shelf for idiots" Oh I think that’s called line6 helix 1 1 Quote Link to comment Share on other sites More sharing options...
GoodShowSir Posted March 1, 2023 Share Posted March 1, 2023 My pretty humble first try at a pedal board! Still have to figure out how to place my power supply nicely, align everything up nicely... and well might be getting even more pedals and do some shuffling. 5 Quote Link to comment Share on other sites More sharing options...
0175westwood29 Posted March 1, 2023 Share Posted March 1, 2023 realised at practice last night alot of the drives/fuzz tones i had were in a very narrow ball park so decided to switch somethings up to give a bit more variantion 4 Quote Link to comment Share on other sites More sharing options...
GoodShowSir Posted March 1, 2023 Share Posted March 1, 2023 Well that makes mine look like a childs puzzle toy That's amazing! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.