TRBboy Posted August 25 Share Posted August 25 7 hours ago, thisisswanbon said: I thought that, but it still kills all of the attack on my octave and brings up all the mud. I've come up with a solution splitting my synth stuff to one loop and clean/fuzz to another using an LS2 clone - think I'm trying to have my cake and eat it too... I know it's supposed to be a good pedal, and just sound 'great', but I think these sort of issues are always going to be a risk with a comp that has so few controls (dyna-comp style). You can't specifically adjust the attack threshold or actual compression level. Have you tried turning the sustain right down, and gradually increasing until you hit the problem point? Just wondering if it'll work if you can keep it under that point? Good luck anyway 😊 Quote Link to comment Share on other sites More sharing options...
admiralchew Posted August 25 Share Posted August 25 I recently put together a few new boards. I know that themed or manufacturer-specific boards can split opinion but, as mentioned on a prior post, messing around with pedals is my main outlet and I've been itching to put these boards together for a while. EAE board - some of you have seen a few other manufacturer-specific boards I've put together but, with the exception of the Broughton board which covers all bases, this one is the most versatile (if only EAE made a flanger and a compressor...). 0xEAE Fuzz > Longsword > Halberd > Bard > Mother > Model FeT > Prismatic Wall > Sending > Hypersleep Heavy board - I've wanted to put this together for ages. It's not as versatile as some of the other boards I've put together but it's remarkably heavy and can be used in conjunction with a specific (smaller) modulation board. Dirtfixer (Wizard in the loop) > MBD2 > Bluebeard > > Chungus > MBD(3) > Iron Pig > Parabellum v2 > Life v3 > Oprichniki > Bass Mountain > Hellraiser > DA-120 Colourful board - this is a labour of love for me and contains some of my most cherished pedals (including the first present my partner ever bought me), some customs and a few one-offs from some of my favourite builders. PDR > POIROC2 > MAE Forever > SubT > DubT > FMeron > Zero Fret > Divaricator > Polytope > Ampigole > Malombra > Arcing Prisms > Chromatron > Delay Llama > Barbenloris > Melt > Mocking Blur > Count-to-5 > Nimbus SE 21 Quote Link to comment Share on other sites More sharing options...
Salt on your Bass? Posted August 25 Share Posted August 25 39 minutes ago, admiralchew said: I recently put together a few new boards. I know that themed or manufacturer-specific boards can split opinion but, as mentioned on a prior post, messing around with pedals is my main outlet and I've been itching to put these boards together for a while. EAE board - some of you have seen a few other manufacturer-specific boards I've put together but, with the exception of the Broughton board which covers all bases, this one is the most versatile (if only EAE made a flanger and a compressor...). 0xEAE Fuzz > Longsword > Halberd > Bard > Mother > Model FeT > Prismatic Wall > Sending > Hypersleep Heavy board - I've wanted to put this together for ages. It's not as versatile as some of the other boards I've put together but it's remarkably heavy and can be used in conjunction with a specific (smaller) modulation board. Dirtfixer (Wizard in the loop) > MBD2 > Bluebeard > > Chungus > MBD(3) > Iron Pig > Parabellum v2 > Life v3 > Oprichniki > Bass Mountain > Hellraiser > DA-120 Colourful board - this is a labour of love for me and contains some of my most cherished pedals (including the first present my partner ever bought me), some customs and a few one-offs from some of my favourite builders. PDR > POIROC2 > MAE Forever > SubT > DubT > FMeron > Zero Fret > Divaricator > Polytope > Ampigole > Malombra > Arcing Prisms > Chromatron > Delay Llama > Barbenloris > Melt > Mocking Blur > Count-to-5 > Nimbus SE Absolutely love all of these.....would love to try the heavy board. Epic dude 😎✌️ 1 Quote Link to comment Share on other sites More sharing options...
keziahj Posted August 25 Share Posted August 25 1 hour ago, admiralchew said: I recently put together a few new boards. I know that themed or manufacturer-specific boards can split opinion but, as mentioned on a prior post, messing around with pedals is my main outlet and I've been itching to put these boards together for a while. EAE board - some of you have seen a few other manufacturer-specific boards I've put together but, with the exception of the Broughton board which covers all bases, this one is the most versatile (if only EAE made a flanger and a compressor...). 0xEAE Fuzz > Longsword > Halberd > Bard > Mother > Model FeT > Prismatic Wall > Sending > Hypersleep Heavy board - I've wanted to put this together for ages. It's not as versatile as some of the other boards I've put together but it's remarkably heavy and can be used in conjunction with a specific (smaller) modulation board. Dirtfixer (Wizard in the loop) > MBD2 > Bluebeard > > Chungus > MBD(3) > Iron Pig > Parabellum v2 > Life v3 > Oprichniki > Bass Mountain > Hellraiser > DA-120 Colourful board - this is a labour of love for me and contains some of my most cherished pedals (including the first present my partner ever bought me), some customs and a few one-offs from some of my favourite builders. PDR > POIROC2 > MAE Forever > SubT > DubT > FMeron > Zero Fret > Divaricator > Polytope > Ampigole > Malombra > Arcing Prisms > Chromatron > Delay Llama > Barbenloris > Melt > Mocking Blur > Count-to-5 > Nimbus SE 🫠 1 Quote Link to comment Share on other sites More sharing options...
LiamPodmore Posted August 25 Share Posted August 25 (edited) Thought i'd add my latest iteration to here after i rebuilt it onto a Templeboard Duo 17. I've got an IO box underneath because the temple mods seem very expensive just do that and it never leaves my bedroom anyway. In - SY-1 - HX Stomp w AO in the loop - M80 just as a DI. I do have space for atleast a couple more pedals though so who knows what else will find it's way on. Edited August 25 by LiamPodmore 7 Quote Link to comment Share on other sites More sharing options...
itu Posted August 25 Share Posted August 25 5 hours ago, admiralchew said: ...Zero Fret > Divaricator > Polytope... May I ask, what do have in the loop of the Divaricator? Adjustments are very different to mine. 1 Quote Link to comment Share on other sites More sharing options...
admiralchew Posted August 25 Share Posted August 25 5 minutes ago, itu said: May I ask, what do have in the loop of the Divaricator? Adjustments are very different to mine. In this board, nothing, I’m using it as an in-line effect. It sounds a bit like wind-chimes on its own but sounds great with a fuzz and octave going through it. How are you using yours? My favourite thing to use through it has been the Slowly Melting. The Divaricator hits just the frequencies I want and the exciters make for interesting textural changes. This board is more of a display piece given I have a board set up that does what I wanted. I had a rejig recently though and wanted to put something colourful together. The Divaricator, like the other Iron Ether pedals, are destined back for their own board. Quote Link to comment Share on other sites More sharing options...
MrDinsdale Posted August 25 Share Posted August 25 6 hours ago, admiralchew said: I recently put together a few new boards. I know that themed or manufacturer-specific boards can split opinion but, as mentioned on a prior post, messing around with pedals is my main outlet and I've been itching to put these boards together for a while. EAE board - some of you have seen a few other manufacturer-specific boards I've put together but, with the exception of the Broughton board which covers all bases, this one is the most versatile (if only EAE made a flanger and a compressor...). 0xEAE Fuzz > Longsword > Halberd > Bard > Mother > Model FeT > Prismatic Wall > Sending > Hypersleep Heavy board - I've wanted to put this together for ages. It's not as versatile as some of the other boards I've put together but it's remarkably heavy and can be used in conjunction with a specific (smaller) modulation board. Dirtfixer (Wizard in the loop) > MBD2 > Bluebeard > > Chungus > MBD(3) > Iron Pig > Parabellum v2 > Life v3 > Oprichniki > Bass Mountain > Hellraiser > DA-120 Colourful board - this is a labour of love for me and contains some of my most cherished pedals (including the first present my partner ever bought me), some customs and a few one-offs from some of my favourite builders. PDR > POIROC2 > MAE Forever > SubT > DubT > FMeron > Zero Fret > Divaricator > Polytope > Ampigole > Malombra > Arcing Prisms > Chromatron > Delay Llama > Barbenloris > Melt > Mocking Blur > Count-to-5 > Nimbus SE Amazing! I'm really intrigued by the Prismic Wall, though I can't imagine how I'd use it! 1 Quote Link to comment Share on other sites More sharing options...
simondee Posted August 25 Share Posted August 25 (edited) Spent half the day cable managing and swapping out a few plates for 3M tape. Edited August 26 by simondee Took some more pics 10 1 Quote Link to comment Share on other sites More sharing options...
itu Posted August 25 Share Posted August 25 3 hours ago, admiralchew said: In this board, nothing, I’m using it as an in-line effect. It sounds a bit like wind-chimes on its own but sounds great with a fuzz and octave going through it. How are you using yours? When there's a need for modulation (usually a flanger) or fuzz. The freq selection at 400 Hz, and no blend. Lows are clear and powerful, and the higher band can push quite a lot of fx, if in need. Surprisingly powerful pedal. Quote Link to comment Share on other sites More sharing options...
LukeFRC Posted August 26 Share Posted August 26 14 hours ago, admiralchew said: I recently put together a few new boards. I know that themed or manufacturer-specific boards can split opinion but, as mentioned on a prior post, messing around with pedals is my main outlet and I've been itching to put these boards together for a while. EAE board - some of you have seen a few other manufacturer-specific boards I've put together but, with the exception of the Broughton board which covers all bases, this one is the most versatile (if only EAE made a flanger and a compressor...). 0xEAE Fuzz > Longsword > Halberd > Bard > Mother > Model FeT > Prismatic Wall > Sending > Hypersleep Heavy board - I've wanted to put this together for ages. It's not as versatile as some of the other boards I've put together but it's remarkably heavy and can be used in conjunction with a specific (smaller) modulation board. Dirtfixer (Wizard in the loop) > MBD2 > Bluebeard > > Chungus > MBD(3) > Iron Pig > Parabellum v2 > Life v3 > Oprichniki > Bass Mountain > Hellraiser > DA-120 Colourful board - this is a labour of love for me and contains some of my most cherished pedals (including the first present my partner ever bought me), some customs and a few one-offs from some of my favourite builders. PDR > POIROC2 > MAE Forever > SubT > DubT > FMeron > Zero Fret > Divaricator > Polytope > Ampigole > Malombra > Arcing Prisms > Chromatron > Delay Llama > Barbenloris > Melt > Mocking Blur > Count-to-5 > Nimbus SE Love the chromatron design! 1 Quote Link to comment Share on other sites More sharing options...
admiralchew Posted August 26 Share Posted August 26 29 minutes ago, LukeFRC said: Love the chromatron design! Thanks very much! The original finish was very battered when I got it and Evan Craig at Dirge Electronics very kindly agreed to refinish it. I’ve loved his style for ages so I was thrilled when he agreed. The colours are based on the 3 Leaf colours but the design is all Evan’s (as is the Slowly Melting next to it). I gather that taking the Chromatron apart and putting it back together was such a fraught affair that Evan has turned down other custom jobs. Quote Link to comment Share on other sites More sharing options...
0175westwood29 Posted August 27 Share Posted August 27 On 25/08/2024 at 21:20, simondee said: Spent half the day cable managing and swapping out a few plates for 3M tape. bit jelous of that Fuzzrocious! 1 Quote Link to comment Share on other sites More sharing options...
Higgins.plays.bass Posted September 1 Share Posted September 1 Back on BassChat after many years of inactivity… & many pedalboard changes. Here’s my current board, nothing crazy, but I like to think all nice toys that are useful! 12 Quote Link to comment Share on other sites More sharing options...
itu Posted September 1 Share Posted September 1 On 25/08/2024 at 23:20, simondee said: How is that Steroids, sorry, Atreides sounding? What does it do? Where did you get that timer? Really clear display. 1 Quote Link to comment Share on other sites More sharing options...
bassist_lewis Posted September 1 Share Posted September 1 1 hour ago, Higgins.plays.bass said: Back on BassChat after many years of inactivity… & many pedalboard changes. Here’s my current board, nothing crazy, but I like to think all nice toys that are useful! how's the CMC Prototype? Been tempted but one for ages. 2 Quote Link to comment Share on other sites More sharing options...
Higgins.plays.bass Posted September 1 Share Posted September 1 14 minutes ago, bassist_lewis said: how's the CMC Prototype? Been tempted but one for ages. I really like it, I ordered one after seeing the last BasstheWorld video on it. It’s basically just classic bass drive, but very nicely done! Really intuitive to use, & works great in a live mix too. I chucked up a couple of demos on my instagram: https://www.instagram.com/reel/C-sur6PtIdg/?igsh=NDNncDVsbDhnc20z 2 Quote Link to comment Share on other sites More sharing options...
ordep Posted September 2 Share Posted September 2 Added the Micro Tron and got an unplanned blue+black theme going on for the small board. 7 Quote Link to comment Share on other sites More sharing options...
simondee Posted September 2 Share Posted September 2 On 01/09/2024 at 09:09, itu said: How is that Steroids, sorry, Atreides sounding? What does it do? Where did you get that timer? Really clear display. The Atreides is an absolutely bonkers thing. I recommend doing a YouTube deep dive since there are some good-ish bass demos, but it's a completely OTT synth pedal with a ton of phase, some filter and some other bits. I was using it at the end of a song but it's morphed more of an in-between song noise pedal now, and it may come off the board entirely in favour of a more reliable and flexible synth pedal. It's a bit of a one-trick pony and it depends on whether you like the trick. It also is unpredictable when it comes to sustain and the tracking can sound a bit broken. I've managed to get something better by stacking the Octabass, 76 and chorus together The timer is an Amazon special! Put some velcro on the back and both me and lead singer can see how we're tracking to set-time which is very handy. It even turns red in the final 2 minutes. 1 1 Quote Link to comment Share on other sites More sharing options...
simondee Posted September 2 Share Posted September 2 On 27/08/2024 at 10:53, 0175westwood29 said: bit jelous of that Fuzzrocious! I hope it never breaks because it'll be very hard to get another one. It's a super distortion. 1 Quote Link to comment Share on other sites More sharing options...
0175westwood29 Posted September 2 Share Posted September 2 5 Quote Link to comment Share on other sites More sharing options...
ordep Posted September 3 Share Posted September 3 (edited) got some sonicakes lying around so why not.. suprisingly good for the price. mounted on a £1 IKEA board. powerbank/usb powered using a Joyo ZGPw Edited September 4 by ordep 16 Quote Link to comment Share on other sites More sharing options...
0175westwood29 Posted September 4 Share Posted September 4 hope its ok to post thia in here 4 Quote Link to comment Share on other sites More sharing options...
Homatron Posted September 4 Share Posted September 4 On 03/09/2024 at 09:39, ordep said: got some sonicakes lying around so why not.. suprisingly good for the price. mounted on a £1 IKEA board. powerbank/usb powered using a Joyo ZGPw Looks like a brilliant compact rig! What is the unit plugged into the ZGPw's output? Quote Link to comment Share on other sites More sharing options...
ordep Posted September 4 Share Posted September 4 (edited) 1 minute ago, Homatron said: Looks like a brilliant compact rig! What is the unit plugged into the ZGPw's output? GigRig Isolator, 4x fully isolated outputs @ 100mah each. Edited September 4 by ordep 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.