Sibob Posted November 24 Share Posted November 24 8 hours ago, obbm said: Si, this is probably a dumb question but why don't you take your D.I. straight out of the Stomp? It’s a fair question, it’s purely because I want the option to send Mic level, which the Stomp can’t do natively. Si 1 Quote Link to comment Share on other sites More sharing options...
SumOne Posted November 25 Share Posted November 25 (edited) Future, or Folly?! Remains to be seen if this will ever become my gigging setup, works well at home though. The main issue with this sort of thing has always been latency and reliability, but this seems very reliable at about 6ms latency (which is better than most wireless systems). My shopping list is: Paint Audio midi footswitches to go with the tuner that'll go on the floor at gigs, and perhaps I'll get 'Gig Performer 5' to help with switching between presets if I can't figure a seamless way of doing that in Reaper. At a gig, the Laptop (setup for it to run with its lid closed) and interface would be put out of harms way on the Cab or on the table where we keep the mixer. If you don't count the cost of the Laptop and Interface and flight case (I already had them for other stuff so I'm not - so haven't spent anything using that maths!) then it'll be about £300 for footswitches and software including a few paid for Plugins...similar to the amount I'll get for selling a couple of analogue pedals. I guess the obvious thing is even with that mental gymnastics is that £300 could buy a decent multi-fx that is more convenient and reliable. But the Laptop setup adds almost unlimited options - often with free Plugins, and means that the sounds I work on for home/recording can be used live, one setup to rule them all! And Laptops/software are only getting more powerful and reliable, I think this might be the future - or at least something you see a lot more of in future. Edit: A re-shuffle to see how it'd work live. Seems to fit and work well and all the power adaptors are in a space below - just one power cable out. A quick move around and the flight case lid goes on. Sounding good just using the Laptop for 'always on' things, next step will be MIDI footswitches to join the tuner on the floor. Edited November 26 by SumOne 6 Quote Link to comment Share on other sites More sharing options...
Obra Posted November 25 Share Posted November 25 (edited) 5 hours ago, SumOne said: Future,or Folly?! Remains to be seen if this will ever become my gigging setup, works well at home though. It needs midi footswitches to go with the tuner that'll go on the floor at gigs, and perhaps 'Gig Performer 5' software to help with seamless switching/trails between presets etc. Laptop and interface would probably be on the Amp or on the table where we keep the mixer. You have to be very careful with latency! Especially since I see that you also use wireless. Edited November 25 by Obra Quote Link to comment Share on other sites More sharing options...
SumOne Posted November 25 Share Posted November 25 (edited) 1 hour ago, Obra said: You have to be very careful with latency! Especially since I see that you also use wireless. Yes, pushing my luck using that! I'd tried laptop with midi keyboard not long ago and gave up due to latency and glitches. With this current setup and even with the additional analogue to audio conversion it seems stable with about 5ms latency, so seems to not be an issue. (Although I would use a cable live to not add more latency). I'm not sure if it's down to having a better Laptop or the Volt interface or the DAW and Plugins I'm using (probably a combination of all), but it is working well with no noticeable latency or glitches. Edited November 25 by SumOne Quote Link to comment Share on other sites More sharing options...
Sibob Posted November 25 Share Posted November 25 I sometimes play with a guitarist who heavily relies on sounds from a laptop in a similar setup. Largely fine, but there has been a couple of instances where the laptop has crashed and he’s had to restart it…..which is 3-5mins of particularly awkward space to fill, especially when it’s a private function. It’s not for me lol. Si 1 Quote Link to comment Share on other sites More sharing options...
danpb Posted November 26 Share Posted November 26 Latest 12 Quote Link to comment Share on other sites More sharing options...
SumOne Posted November 26 Share Posted November 26 9 hours ago, Sibob said: I sometimes play with a guitarist who heavily relies on sounds from a laptop in a similar setup. Largely fine, but there has been a couple of instances where the laptop has crashed and he’s had to restart it…..which is 3-5mins of particularly awkward space to fill, especially when it’s a private function. It’s not for me lol. Si I figure if that happens then it'd only take me a second to press a button on the interface to bypass the Laptop. Or if it's a problem with the interface, about 5 seconds to unplug from that and plug direct into the Amp (I still plan on using a physical Amp/Cab, the PA is too weedy)......it would mean ditching the effects for a while - which would probably please bandmates and punters! Quote Link to comment Share on other sites More sharing options...
Yorkshire Bottom End Posted November 27 Share Posted November 27 My economy pedalboard painted in Trace Elliot colours (nearly) to match my rig. After lots of shopping around it's probably cost me around £250-£275 all in. Best pedal of the lot? Boss NS-2 Noise Suppressor. Cures all ills. Close second comes the Sonicake Levitate Reverb/Delay. Magic for about £20. 8 Quote Link to comment Share on other sites More sharing options...
Sibob Posted November 28 Share Posted November 28 Done for a bit I reckon 😅 Si 15 Quote Link to comment Share on other sites More sharing options...
LukeFRC Posted November 28 Share Posted November 28 35 minutes ago, Sibob said: Done for a bit I reckon 😅 Si Is that a day of the tentacles themed one at the bottom?! Very cool Quote Link to comment Share on other sites More sharing options...
Sibob Posted November 28 Share Posted November 28 12 minutes ago, LukeFRC said: Is that a day of the tentacles themed one at the bottom?! Very cool Yup, that’s my Fuzzrocious BDPG 🙂 Si Quote Link to comment Share on other sites More sharing options...
dudewheresmybass Posted November 28 Author Share Posted November 28 there's a lot of MXR love going on there. I'm not surprised either - their bass offerings are great! 2 Quote Link to comment Share on other sites More sharing options...
nilorius Posted November 28 Share Posted November 28 3 hours ago, Sibob said: Done for a bit I reckon 😅 Si That is a real spinosaurus pedal board !!! :))) 1 Quote Link to comment Share on other sites More sharing options...
Sibob Posted November 28 Share Posted November 28 (edited) 13 hours ago, nilorius said: That is a real spinosaurus pedal board !!! :))) I’m not quite sure what you mean, but I like it. It’s 5 separate boards really. Si Edited November 29 by Sibob Quote Link to comment Share on other sites More sharing options...
0175westwood29 Posted November 28 Share Posted November 28 put the dark driving into a blooper…..and switched the Zoar for the PW-2 ahead of a stream tonight so I’ve got some new sounds 3 Quote Link to comment Share on other sites More sharing options...
LukeFRC Posted November 28 Share Posted November 28 (edited) 3 hours ago, Sibob said: Yup, that’s my Fuzzrocious BDPG 🙂 Si Loving the niche reference - loved that game. I have no idea what the pedal is but I want one! Edited November 28 by LukeFRC 2 Quote Link to comment Share on other sites More sharing options...
jimbobothy Posted November 29 Share Posted November 29 17 hours ago, Sibob said: Done for a bit I reckon 😅 Si … what is your favourite one Si? 2 Quote Link to comment Share on other sites More sharing options...
Sibob Posted November 29 Share Posted November 29 (edited) 3 hours ago, jimbobothy said: … what is your favourite one Si? That’s a tough one! The Noble board is my main board and has been for years, so that is just dialed in. The Pedaltrain Nano below it is an attempt to capture a similar vibe and sounds in a smaller footprint for when I’m not taking my full rig out (my amps and Noble board typically live in a packed away flight case). The ‘clean’ board top-right is cool, with the CE-5 being one of the early analogue ones (they’re all digital now), old Octaver too, May ‘82. I often use that board with Jocee. The ‘dirt’ board at the bottom is just for fun at this point, but hopefully will get to apply it to some music at some point, lots of big grindy tones. And the HX Stomp is for when I just need any of the above in a tiny, easy-to-transport package…plus a mic-level DI. All of them, but ultimately, it’s all about the Noble board! Si Edited November 29 by Sibob 2 Quote Link to comment Share on other sites More sharing options...
MrDinsdale Posted November 30 Share Posted November 30 I decided to mix it up, and I had a lot of pedals on the shelf I missed as I could only fit around 4 with the QC. I'm now using the QC as my interface, and it has a semi-permanent place on the desk while I'm not doing any projects. I slapped all the favourites back on my board, which is all hooked up to the fx loops of the QC. The Model Fet and Mother in one loop and everything else in the other. It's probably gonna stay like this for a while, makes it way easier to get captures etc and let's meet fiddle. 8 Quote Link to comment Share on other sites More sharing options...
spyder Posted November 30 Share Posted November 30 After getting rid of most of my pedals a few months back, I'm on the build again. Trying to keep it small with drive, compressor and EQ / Di. Might add a flanger / chorus for an up coming 80s goth product. Any suggestions...................... 4 Quote Link to comment Share on other sites More sharing options...
bnt Posted November 30 Share Posted November 30 (edited) Another iteration of my "big board" (by my standards at least) for home practice. I'm trying to keep it simpler by using the Complicator* as a preamp / cabsim only without anything in the loops. It's still doing split processing, I can blend between a clean tone (with LPF) or a preamp tone for some grit. I wonder if I can modify that box to make the blend externally controllable? After that I brought back the Boss MD-200 and added an expression pedal to control effect depth. Out of that in stereo in to the t.mix, where I can add music over Bluetooth and attach headphones. In a live setup I'd probably take DI from the Complicator and use its FX loop with the JHS 3 Series Phaser (which is working again for now). Signal path: Peterson StroboStomp Mini -> Orange Kongpressor -> mxr bass octave deluxe -> T-Rex Diva Drive -> Complicator -> Boss MD-200 -> t.mix Micromix * The LY-ROCK clone of a DSM&H Simplifier, top centre. The board is the Harley Benton Spaceship 40-B, with the built-in battery. It also provides USB power for the mixer and my wireless headphone adapter (not shown). When that's all working, I have only the cable from the bass in to the board and monitor through wireless headphones (TV type, not Bluetooth, so there's no lag). Edited December 1 by bnt 5 Quote Link to comment Share on other sites More sharing options...
0175westwood29 Posted November 30 Share Posted November 30 streaming my board now hope this is ok to post 1 Quote Link to comment Share on other sites More sharing options...
Chadu25 Posted November 30 Share Posted November 30 (edited) 14 hours ago, MrDinsdale said: I decided to mix it up, and I had a lot of pedals on the shelf I missed as I could only fit around 4 with the QC. I'm now using the QC as my interface, and it has a semi-permanent place on the desk while I'm not doing any projects. I slapped all the favourites back on my board, which is all hooked up to the fx loops of the QC. The Model Fet and Mother in one loop and everything else in the other. It's probably gonna stay like this for a while, makes it way easier to get captures etc and let's meet fiddle. Super love your setup mate! Are you by any chance in Gamedev or a designer or in IT industry? I get the vibes haha Edited November 30 by Chadu25 1 Quote Link to comment Share on other sites More sharing options...
Chadu25 Posted November 30 Share Posted November 30 My year-end setup. Went full analog on my board. This will be my main rig and the HX Stomp as a standalone fly rig(using my presets based on my main board). Just received the Doom2 and Octabvre today which I bought from reverb. Surprised I didn’t pay any customs and bought them for $340 and $355. 8 Quote Link to comment Share on other sites More sharing options...
MrDinsdale Posted December 1 Share Posted December 1 7 hours ago, Chadu25 said: Super love your setup mate! Are you by any chance in Gamedev or a designer or in IT industry? I get the vibes haha How’d ya know?! 🤣 I’m a web developer and general geek. 7 hours ago, Chadu25 said: My year-end setup. Went full analog on my board. This will be my main rig and the HX Stomp as a standalone fly rig(using my presets based on my main board). Just received the Doom2 and Octabvre today which I bought from reverb. Surprised I didn’t pay any customs and bought them for $340 and $355. That’s a nice setup! Really intrigued by the DCX Bass. The Sushi-Nobel DI too. It’s a lot of awesome for such a small board! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.