ras52 Posted July 30, 2016 Share Posted July 30, 2016 [quote name='discreet' timestamp='1469883028' post='3101745'] Presumably you can enjoy an evening out whether you use a compressor or not? [/quote] I sometimes spend an evening in evening out, iron-ically. Quote Link to comment Share on other sites More sharing options...
TimR Posted July 30, 2016 Share Posted July 30, 2016 (edited) [quote name='gs_triumph' timestamp='1469885473' post='3101780'] Exactly what I'm pondering just now. Got ale bass preamp with an effects loop and can't decide where it should go. Originally has it after my octave but moved it to before as this helped the octaver. Then I tried it last in chain just before the amp and it sounded better for general playing (don't really use the octave anyway)... However since getting the le bass I can't decide if it should go in the effects loop of after the preamp... Complicated business this 😜 [/quote] Again. It depends what you're using it for. Normally it's part of your pre-amp so it goes before the FX loop. Unless you're using pedal effects when it would then be after them. Unless you're using a compressor pedal in which case it goes before your pedal FXs. Edited July 30, 2016 by TimR Quote Link to comment Share on other sites More sharing options...
stingrayPete1977 Posted July 30, 2016 Share Posted July 30, 2016 I have a compressor pedal and I have put mine in the same place for the last ten years, top of the spare bedroom wardrobe. Quote Link to comment Share on other sites More sharing options...
ahpook Posted July 30, 2016 Share Posted July 30, 2016 (edited) It's about time for a picture of the wrong type of compressor isn't it ? Maybe one with a comedy name ? Oh yeah, you knows it. Edited July 30, 2016 by ahpook Quote Link to comment Share on other sites More sharing options...
stingrayPete1977 Posted July 30, 2016 Share Posted July 30, 2016 Is it good for metal Work? Quote Link to comment Share on other sites More sharing options...
ahpook Posted July 30, 2016 Share Posted July 30, 2016 That's more like it ! Quote Link to comment Share on other sites More sharing options...
gs_triumph Posted July 30, 2016 Share Posted July 30, 2016 [quote name='TimR' timestamp='1469893297' post='3101848'] Again. It depends what you're using it for. Normally it's part of your pre-amp so it goes before the FX loop. Unless you're using pedal effects when it would then be after them. Unless you're using a compressor pedal in which case it goes before your pedal FXs. [/quote] Yes, it's a pedal... EBS multicomp So you think it should be first in line after the bass? Quote Link to comment Share on other sites More sharing options...
barkin Posted July 30, 2016 Share Posted July 30, 2016 [quote name='blue' timestamp='1469852056' post='3101507'] Agreed, I think the problem is a lot of bass players think compression is an effect. It's not. Blue [/quote] It can be. Quote Link to comment Share on other sites More sharing options...
acidbass Posted July 30, 2016 Share Posted July 30, 2016 Mild compression in studio here (usually via valves) but no compression live forces you to even up your playing and encourages dynamics. Quote Link to comment Share on other sites More sharing options...
TimR Posted July 30, 2016 Share Posted July 30, 2016 [quote name='gs_triumph' timestamp='1469895058' post='3101870'] Yes, it's a pedal... EBS multicomp So you think it should be first in line after the bass? [/quote] Depends what your trying to do with it. I'd start with EQ -> Comp -> FX. But also try putting it right in front of the Amp. Use your ears. Quote Link to comment Share on other sites More sharing options...
TimR Posted July 30, 2016 Share Posted July 30, 2016 A small amount of compression will also give you slightly more control over your sustain. You can't do that with technique. Quote Link to comment Share on other sites More sharing options...
paul_c2 Posted July 30, 2016 Share Posted July 30, 2016 [quote name='TimR' timestamp='1469893297' post='3101848'] Again. It depends what you're using it for. Normally it's part of your pre-amp so it goes before the FX loop. Unless you're using pedal effects when it would then be after them. Unless you're using a compressor pedal in which case it goes before your pedal FXs. [/quote] So there's a case for using 2 or more compressors? Quote Link to comment Share on other sites More sharing options...
Marvin Posted July 30, 2016 Share Posted July 30, 2016 When i use compression it's to create a tone not to hide any faults in my playing. As such sometimes I like using it and sometimes not, depends what mood my ears are in. Currently it's before my amp, mainly as I don't have an fx loop in my amp. Do whatever works for you is what i say. There are no rules. [quote name='paul_c2' timestamp='1469903461' post='3101934'] So there's a case for using 2 or more compressors? [/quote] Look up Billy Sheehans last Rig Rundown on Premier Guitars You Tube channel. He uses 2 or more compressors...I think Quote Link to comment Share on other sites More sharing options...
TimR Posted July 30, 2016 Share Posted July 30, 2016 Yes. Depends on how you are using each compressor and what you want to achieve. The compressor on my amp has a single dial that affects level. Everything else; ratio, break point, make up gain etc is fixed. You can have hard knee and soft knee compressors. Nothing wrong with compressing the signal going into your fx loop and then compressing it again after it has been subjected to all the effects. After all, that's what happens in the studio. Compressed at source, then the final mix will be compressed as well. Then it'll all be compressed again when the radio plays it. It's not surprising people can't find their 'tone'. Quote Link to comment Share on other sites More sharing options...
JTUK Posted July 31, 2016 Share Posted July 31, 2016 What does the engr think when you put a compressor in line Quote Link to comment Share on other sites More sharing options...
BottomE Posted July 31, 2016 Share Posted July 31, 2016 [quote name='TimR' timestamp='1469899369' post='3101907'] Depends what your trying to do with it. I'd start with EQ -> Comp -> FX. But also try putting it right in front of the Amp. Use your ears. [/quote] I've got the same EBS Multicomp and i put it in the send and return rather than direct in with the bass. No scientific reason for this - just trial and error. Quote Link to comment Share on other sites More sharing options...
Roland Rock Posted July 31, 2016 Share Posted July 31, 2016 [quote name='JTUK' timestamp='1469958916' post='3102236'] What does the engr think when you put a compressor in line [/quote] I once forgot to engage my compressor when using my siren effect. The engineer ran at me, ears bleeding, wielding an enormous spanner Quote Link to comment Share on other sites More sharing options...
TimR Posted July 31, 2016 Share Posted July 31, 2016 [quote name='JTUK' timestamp='1469958916' post='3102236'] What does the engr think when you put a compressor in line [/quote] How do you mean Quote Link to comment Share on other sites More sharing options...
gafbass02 Posted July 31, 2016 Share Posted July 31, 2016 I literally won't play without it. Even at at open mic, my compressor goes in the gig bag. Used it for 25 years plus on everything and never ever got this 'it kills tone/dynamics' argument. Not if you don't let it it doesn't! Quote Link to comment Share on other sites More sharing options...
Chaos Daveo Posted July 31, 2016 Share Posted July 31, 2016 Used correctly its a superb tool and can make leaps of differance of that killer tone. Quote Link to comment Share on other sites More sharing options...
barneyg42 Posted July 31, 2016 Share Posted July 31, 2016 (edited) I took a chance on buying a Spectracomp compressor as I'd liked the one on the BH500 head which is sold. Not looking back, it's a great across the spectrum unit! Only problem is every little bum note can be heard :-) My other half says she hasn't heard me so clearly in all the time she's been coming to gigs, especially the individual notes not just the low end rumble! Horses for courses, doesn't work for everyone, it does for me!! Edited July 31, 2016 by barneyg42 Quote Link to comment Share on other sites More sharing options...
BottomE Posted July 31, 2016 Share Posted July 31, 2016 [quote name='barneyg42' timestamp='1469977154' post='3102402'] I took a chance on buying a Spectracomp compressor as I'd liked the one on the BH500 head which is sold. Not looking back, it's a great across the spectrum unit! Only problem is every little bum note can be heard :-) My other half says she hasn't heard me so clearly in all the time she's been coming to gigs, especially the individual notes not just the low end rumble! Horses for courses, doesn't work for everyone, it does for me!! [/quote] With you on that Barney. I thought i had a good sound! The compressor has really opened things up in terms of the clarity, especially basslines that have a lot of notes in them, chords, octaves, slap. Quote Link to comment Share on other sites More sharing options...
blue Posted August 1, 2016 Share Posted August 1, 2016 [quote name='JTUK' timestamp='1469865778' post='3101539'] It is funny how a popular opinion or trend gets picked up on here and comes back completely different after a while. It happens quite a lot here and this is one of those subjects. Never used it, never needed to. In studio and out front are places that the engr will likely address, but I don't see any point for backline. Where do you put it in the signal chain? [/quote] There's no engineers or backline in US bars.😁 Blue Quote Link to comment Share on other sites More sharing options...
mcnach Posted August 1, 2016 Share Posted August 1, 2016 [quote name='gafbass02' timestamp='1469972079' post='3102357'] never ever got this 'it kills tone/dynamics' argument. Not if you don't let it it doesn't! [/quote] exactly Quote Link to comment Share on other sites More sharing options...
mcnach Posted August 1, 2016 Share Posted August 1, 2016 [quote name='JTUK' timestamp='1469958916' post='3102236'] What does the engr think when you put a compressor in line [/quote] They never ask. They've never commented. Why would they? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.