chrisd783 Posted August 15, 2016 Share Posted August 15, 2016 (edited) This is ideal for someone looking for a sturdy, powerful cab with the time and knowledge to get it working again, neither of which i possess [color=#1D2129][font=helvetica, arial, sans-serif] The front two drivers are kaput, leaving 2 x 300 watt drivers with a total of 16 ohms of impedance wired in parallel. All this needs is 2 x 32 ohm speakers wired in parallel with the existing two to give an 8 ohm cab.[/font][/color][color=#1D2129][font=helvetica, arial, sans-serif] I've tried to find 300w 10 inch drivers at 32 ohms but they seem to be impossible to get hold of. There are some 100w drivers around at 32 ohms though, so you'll end up with an 800w 4 x 10 rig in a sturdy, compact cabinet.[/font][/color][color=#1D2129][font=helvetica, arial, sans-serif] Cash is king as always but I'm very open on this and will listen to any sensible cash or trade offer. A decent acoustic bass, heads, pedals, pretty much anything, try me! Can include cash either way for the right deal. [/font][/color] [color=#1D2129][font=helvetica, arial, sans-serif] I'm happy to post this, price comes in at around [color=#5A5A5A][size=4][b]£20[/b][/size][/color][/font][/color] [color=#1D2129][font=helvetica, arial, sans-serif] Any questions feel free to drop me a line.[/font][/color] Edited August 20, 2016 by chrisd783 Link to comment Share on other sites More sharing options...
sirmuppet Posted August 16, 2016 Share Posted August 16, 2016 Very tempted by this. Are the front speakers a different model to the back ones? Do you know which model the speakers are that have gone? What caused the front ones to break down and what's the condition of the back ones? Sorry for all the questions. Have been looking in to getting a 4x10 to match my 1x15 and this would tick the boxes if it were working. Since it's not I need to check. I can only find one speaker that matches the spec you give. Thanks, G. Link to comment Share on other sites More sharing options...
plankspanker Posted August 16, 2016 Share Posted August 16, 2016 I'm tempted, too! Wondering about going the whole hog and putting four new drivers into it. Hmmmmmmm...... Link to comment Share on other sites More sharing options...
hemdee666 Posted August 16, 2016 Share Posted August 16, 2016 You don't need to buy two 32 ohm speakers as they are (very) hard to find. Put in two 8 ohm speakers, wired in serie (giving you 16 ohm) and put them parallel over the two 32ohm speakers in parallel => 8 ohms. Job done. Grtz, Marc. Link to comment Share on other sites More sharing options...
plankspanker Posted August 16, 2016 Share Posted August 16, 2016 [quote name='hemdee666' timestamp='1471360208' post='3112484'] You don't need to buy two 32 ohm speakers as they are (very) hard to find. Put in two 8 ohm speakers, wired in serie (giving you 16 ohm) and put them parallel over the two 32ohm speakers in parallel => 8 ohms. Job done. Grtz, Marc. [/quote] That would give the correct total impedance and equal power sharing between the drivers but you'd have the Tone Police after you for incestuous mixing of drivers in the same cab. Link to comment Share on other sites More sharing options...
Delberthot Posted August 16, 2016 Share Posted August 16, 2016 Trace 1048 & 1084 cabs used 32 ohm drivers. They're still available [url="https://www.watfordvalves.com/product_detail.asp?id=1747"]here[/url]. No idea if they are close as far as spec goes though Link to comment Share on other sites More sharing options...
chrisd783 Posted August 17, 2016 Author Share Posted August 17, 2016 [quote][color=#282828][font=helvetica, arial, sans-serif]Very tempted by this. Are the front speakers a different model to the back ones? Do you know which model the speakers are that have gone? What caused the front ones to break down and what's the condition of the back ones?[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]Sorry for all the questions. Have been looking in to getting a 4x10 to match my 1x15 and this would tick the boxes if it were working. Since it's not I need to check. I can only find one speaker that matches the spec you give.[/font][/color][/quote] I've PM'd you SirM! Link to comment Share on other sites More sharing options...
hemdee666 Posted August 17, 2016 Share Posted August 17, 2016 (edited) [quote name='plankspanker' timestamp='1471371888' post='3112614'] That would give the correct total impedance and equal power sharing between the drivers but you'd have the Tone Police after you for incestuous mixing of drivers in the same cab. [/quote] 😎 Edited August 17, 2016 by hemdee666 Link to comment Share on other sites More sharing options...
chrisd783 Posted August 18, 2016 Author Share Posted August 18, 2016 Bump Link to comment Share on other sites More sharing options...
Recommended Posts