xgsjx Posted October 12, 2016 Share Posted October 12, 2016 I've got a Hercules grab stand (I'm thinking the title may give that part & the next away), it's sat for a bit in a folded up state in the spare room. Now all the black plastic bits are sticky, like they've been sprayed with spray glue. It leaves sticky residue on my hand when I touch it too. Any ideas? Quote Link to comment Share on other sites More sharing options...
JapanAxe Posted October 12, 2016 Share Posted October 12, 2016 This happened to an instant corkscrew device in my kitchen. I don't know either! Quote Link to comment Share on other sites More sharing options...
leschirons Posted October 12, 2016 Share Posted October 12, 2016 [quote name='xgsjx' timestamp='1476258016' post='3152677'] I've got a Hercules grab stand (I'm thinking the title may give that part & the next away), it's sat for a bit in a folded up state in the spare room. Now all the black plastic bits are sticky, like they've been sprayed with spray glue. It leaves sticky residue on my hand when I touch it too. Any ideas? [/quote] Nope. Same problem with mine. Even tried wiping it with olive oil to remove the stickyness. Also tried wife's nail varnish remover / WD40 / petrol / and Cillit bang. Last resort will be talcum powder. I'll let you know if it works so we don't both mess the house up. Quote Link to comment Share on other sites More sharing options...
scrumpymike Posted October 12, 2016 Share Posted October 12, 2016 Yep, there's history behind this! The manufacturer has to date replaced a bunch of them FOC - mine included. Not sure whether that generous offer has timed out now but it would certainly be worth giving them a try. Just fyi, when I contacted them I didn't let on that I knew about the history of FOC replacements as I didn't want to back them into a corner - just told them that I have 4 of their stands and expressed my disappointment with an otherwise quality product. To be honest, I would have been happy if they'd just given me a discount off my next purchase. Quote Link to comment Share on other sites More sharing options...
pete.young Posted October 12, 2016 Share Posted October 12, 2016 http://basschat.co.uk/topic/291856-hercules-stands-with-sticky-grip/page__p__3146678__hl__hercules__fromsearch__1#entry3146678 Quote Link to comment Share on other sites More sharing options...
vmaxblues Posted October 12, 2016 Share Posted October 12, 2016 I have had the same issue, I got it all off with a product called....wait for it.....'sticky stuff remover' yes honestly, and it solved it, most odd though. On ebay and Lakeland stock it. Quote Link to comment Share on other sites More sharing options...
leschirons Posted October 12, 2016 Share Posted October 12, 2016 Okay, the talcum powder idea does seem to help the problem. Whether it will last, I'm not sure. However, I would not suggest anyone trying this method as it appears to get you into trouble. Quote Link to comment Share on other sites More sharing options...
xgsjx Posted October 12, 2016 Author Share Posted October 12, 2016 I've just contacted Hercules via their website, so I'll see if they can help. Having a wee google, apparently rubbing alcohol could be a contender for getting rid of it, but there is the chance it could also make things worse. I have ethanol in the pantry (used to use it on cake decoration), so if Hercules can't help, I'll give it a blast & let you know what it does. Quote Link to comment Share on other sites More sharing options...
jacko Posted October 12, 2016 Share Posted October 12, 2016 I have several Hercules stands and don't have any issues with stickiness. What I have seen though is sometimes the rivets in the clamp drop out which is a bit worrying, especially when I consider the value of my instruments Quote Link to comment Share on other sites More sharing options...
Merton Posted October 12, 2016 Share Posted October 12, 2016 I thought it was just my stand which suffered, will see what Hercules say! Quote Link to comment Share on other sites More sharing options...
leschirons Posted October 12, 2016 Share Posted October 12, 2016 [quote name='hiram.k.hackenbacker' timestamp='1476272128' post='3152858'] How odd. I have three of them and haven't noticed any issues. Is this a problem that develops over time or are they sticky from the outset? [/quote] It's just the bit that's all rubber where you adjust the height. Great when I first got it then it just sort of appeared. It had never been cleaned with anything suspect, not even wiped with a damp cloth so no idea what's happening chemically. I guess it was coated with something that breaks down. Quote Link to comment Share on other sites More sharing options...
Shockwave Posted October 12, 2016 Share Posted October 12, 2016 [quote name='xgsjx' timestamp='1476263125' post='3152723'] I've just contacted Hercules via their website, so I'll see if they can help. Having a wee google, apparently rubbing alcohol could be a contender for getting rid of it, but there is the chance it could also make things worse. I have ethanol in the pantry (used to use it on cake decoration), so if Hercules can't help, I'll give it a blast & let you know what it does. [/quote] Lynx Deodorant will do the same thing. Give it a shot. I clear all my sticky situations with it. Quote Link to comment Share on other sites More sharing options...
xgsjx Posted October 12, 2016 Author Share Posted October 12, 2016 Mine isn't just the adjustment clamp, it's the grab clamp and the adjustment knob too. Basically every thing that is black plastic. Strings and Things have emailed me & asked me to send a couple of pics & the model number. I'll get them that when I get home from work (which'll be about 3:30). It was a good speedy response to start with. Even if they have a tested solution to getting rid of the stickiness, that would be fine. Quote Link to comment Share on other sites More sharing options...
neepheid Posted October 12, 2016 Share Posted October 12, 2016 Already been discussed, and it looks like Strings and Things won't give you much trouble about it: http://basschat.co.uk/topic/291856-hercules-stands-with-sticky-grip/ Quote Link to comment Share on other sites More sharing options...
bubinga5 Posted October 12, 2016 Share Posted October 12, 2016 Mine did this. Then the pin that holds the grab button thing snapped and the spring flew out. Hardly Herculean. won't be getting another one Quote Link to comment Share on other sites More sharing options...
bubinga5 Posted October 12, 2016 Share Posted October 12, 2016 Has anyone tried Ultimate stands.? Quote Link to comment Share on other sites More sharing options...
timmo Posted October 13, 2016 Share Posted October 13, 2016 [quote name='bubinga5' timestamp='1476288406' post='3153081'] Has anyone tried Ultimate stands.? [/quote] Yes. I had one. I kept my bass permanantely in it. I went into the room to fing my bass on the floor. The yoke had snapped clean off for no apparent reason. I may just have had a dodgy one though. Quote Link to comment Share on other sites More sharing options...
12stringbassist Posted October 13, 2016 Share Posted October 13, 2016 So, what's the general consensus about a cure for the stickiness? Quote Link to comment Share on other sites More sharing options...
xgsjx Posted October 13, 2016 Author Share Posted October 13, 2016 I got an email back asking for my address so they can send me a replacement GS414B. I thought this was a part, but after googling, it appears to be a full replacement stand! Now that is outstanding service! Quote Link to comment Share on other sites More sharing options...
BigRedX Posted October 13, 2016 Share Posted October 13, 2016 [quote name='12stringbassist' timestamp='1476354393' post='3153521'] So, what's the general consensus about a cure for the stickiness? [/quote] Get in touch with Strings And Things who are the distributor for Hercules in the UK, send them some photos of the affected stand and they will send you a brand new replacement free of charge. Just in case anyone hasn't read through the other thread which I started, I have 6 Hercules stands bought at various times over the past 7 years, and 4 of them developed the sticky grip some time during the course of this year. To me it looks as though the plastic used for the grip has started to break down. The two that haven't developed the sticky grip show no signs of doing so, so I wonder if the formulation of the plastic has been changed at some point? Anyway after getting in touch with Strings and Things and sending them photos of the affected stands showing the sticky areas on the grips I received a large box with 4 brand new stands completely free of charge. That is excellent customer service in my book. Well done to Strings and Things! Quote Link to comment Share on other sites More sharing options...
M@23 Posted October 13, 2016 Share Posted October 13, 2016 (edited) Which stand are people having the problem with? I've got 4 of them at home which I've not used for months, all with guitars sat in them... hope none of them have gone funny without my knowing so. Mine are the standard, single auto grab ones. Edited October 13, 2016 by M@23 Quote Link to comment Share on other sites More sharing options...
TheGreek Posted October 13, 2016 Share Posted October 13, 2016 I had the same issue, contacted S&T and they replaced the stand without any trouble. I think that they produced a batch of stands using a defective batch of chemicals which went off over time and they're keen to make good on these. As stated above, no issues about providing a replacement stand. Quote Link to comment Share on other sites More sharing options...
KevB Posted October 14, 2016 Share Posted October 14, 2016 Mine's gone sticky but it's the only one I have and used every gig, can't really do without it at the moment so can't send it back for replacement until theres a break in gigs, maybe December. Its only the bit you briefly touch to lower and raise the centre shaft, it doesnt come in to contact with any instruments. The foam bits that touch the body and the headstock grabbers are all fine so far. Quote Link to comment Share on other sites More sharing options...
JapanAxe Posted October 14, 2016 Share Posted October 14, 2016 I have had a single and a double for at least 7 years. If they were going to go sticky they'd have done it by now I reckon! Quote Link to comment Share on other sites More sharing options...
scrumpymike Posted October 14, 2016 Share Posted October 14, 2016 [quote name='KevB' timestamp='1476433364' post='3154179'] Mine's gone sticky but it's the only one I have and used every gig, can't really do without it at the moment so can't send it back for replacement until theres a break in gigs, maybe December. Its only the bit you briefly touch to lower and raise the centre shaft, it doesnt come in to contact with any instruments. The foam bits that touch the body and the headstock grabbers are all fine so far. [/quote] As far as I know, they don't ask for the faulty stand to be returned - certainly didn't with mine. Mind you, I did send a couple of pic's. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.