Jump to content
Why become a member? ×

MarkBass Little Mark LM250 - Made In Italy - **SOLD**
£225


dodgnofski
 Share

Recommended Posts

Price - £225.00 posted to UK Mainland :)

MarkBass LM250 watt Bass Amp, which is one of the original Italian built jobbies, before production was moved to the Far East.

The amp is in good used condition with just a few marks on the base from normal use, but apart from that there are no issues and everything works as it should :)

As explained to me by someone - who unlike me, knew what they were talking about - a 500w amp is not twice as loud as a 250w amp! In fact it would take a 2500w - ish amp to be 'twice' as loud as a 250w amp.

Therefore, It would follow that the LM250 has a lot more than half the volume of the LM500 jobbie and as dear old Marco himself says "the LM250 is almost as loud through a 4ohm load, as the LM500 is through an 8ohm load" :) and having owned and played through several of these since they first appeared - I can vouch for the amount of umph available - particularly at 4ohms - all I know is, it's blinking loud :)

Here are those specs we all love so much :) -

TECHNICAL SPECS
INPUTS

INPUT
impedance 500 Kohm, max. voltage 15 Vpp
BALANCED INPUT (XLR)
impedance 100 Khom, max. voltage 25 Vpp
EFFECT RETURN
impedance 22 Kohm, max. voltage 25 Vpp

CONTROLS

GAIN
-80 dB to +23 dB range
MASTER VOLUME
GROUND LIFT
switch on rear panel

EQUALIZATION

LOW
center frequency: 40 Hz; level: ±16 dB
LOW MID
center frequency: 360 Hz, level: ±16 dB
HIGH MID
center frequency: 800 Hz, level: ±16 dB
HIGH
center frequency: 10 kHz, level: ±16 dB
VPF (Variable Pre-shape Filter)
center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range 250 Hz-20 kHz (cut)


OUTPUT

LINE OUT
balanced XLR, max. voltage 10 Vpp
EFFECT SEND
unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 25 Vpp
SPEAKER OUT
speakon, 1/4"


OTHER

WEIGHT
5.73 lbs / 2.6 kg
DEPTH
10.1 in. / 25.6 cm
WIDTH
10.87 in. / 27.6 cm
HEIGHT
2.8 in. / 7.1 cm
OUTPUT POWER
150W RMS @ 8 ohm, 250W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz

Please feel free to arrange a try out, there are no issues and the amp is in good used condition, or if you are too far away, I could post to the UK Mainland - payment via PayPal gift, or bank transfer - ta :)

Edited by dodgnofski
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...