Similar suggestions to a CIOKS DC10

[nash]

I'm going to be running around 8 pedals and a Boss ES8 so it'll need at least one 300mA+ outlet.

[0175westwood29]

if you pedals can work well with daisy chaining you could grab a strymon Ojai, 5x500ma isolated points, or you could go with a gigrig system depending on power needs for a little bit more than the dc10.

[nash]

Good shouts.

[nash]

[quote name='0175westwood29' timestamp='1478523985' post='3169585']
if you pedals can work well with daisy chaining you could grab a strymon Ojai, 5x500ma isolated points, or you could go with a gigrig system depending on power needs for a little bit more than the dc10.
[/quote]

Just spotted the Truetone C12

[EBS_freak]

http://yankee.com.pl/?lang=en

[0175westwood29]

[quote name='nash' timestamp='1478529256' post='3169615']
Just spotted the Truetone C12
[/quote]

thats a nice looking supply but unless you need the ac and 18v outlets there wasted points plus ive read somewhere that you can over power outlets but that involves maths and i couldnt be bothered to keep adding stuff up everytime i add new pedals!

Andy

[dannybuoy]

Quite the opposite, it's one of the only supplies along with its little brother the CS7 where you can pretty much ignore the ratings on the individual outputs the outputs as long as you don't exceed the total for the entire brick.

[Roland Rock]

[quote name='EBS_freak' timestamp='1478530161' post='3169623']
http://yankee.com.pl/?lang=en
[/quote]

White plastic is more durable than black - That's a new one on me!

"White housing, because of higher pigment content, provides bigger durability than black"

Edited November 8, 2016 by Roland Rock