Buying a replacement P bass neck

[morson93]

So I'm planning on putting together a parts P bass, starting with a guitarbuild body:

Precision Bass contoured – Guitarbuild

I plan on finishing the body myself, using hipshot hardware and Seymour Duncan QP's, however the one thing I cannot decide on is the neck.

After researching for U.K. neck suppliers I've narrowed it down to one of the following:
Northwest Guitars:
1 Piece Replacement Precision Bass Guitar Neck - Vintage Gloss Finish

Custom World Guitar Parts:
P-bass maple neck 20 frets black dots 17.5mm holes amber glossy

Standard Fender Neck:
Fender P Bass Neck 20 Medium Jumbo Frets MN - Rich Tone Music

The fender neck is the most expensive but I would not mind spending £200 on a good neck, has anyone used/bought any of these necks and can shed a little light on which are worth the money?

Are there any U.K. suppliers that I've missed? Or other suppliers that won't charge £50+ just to have the neck shipped?

Thanks guys

[Mykesbass]

This will probably come in at less than £200 - I bought one of their kits and carriage and duty were very reasonable [url="http://byoguitars.com/Guitars/Mighty-Mite-P-Bass-Neck-wMaple-Fingerboard__MM2907.aspx"]http://byoguitars.com/Guitars/Mighty-Mite-P-Bass-Neck-wMaple-Fingerboard__MM2907.aspx[/url]