Help with Sire V7 stacked knob

[doc40hz]

Bit of disaster - I somehow managed to pull the volume knob of the stacked control on my Sire. The knob and the spindle have come out and I cant get it to catch inside - its just spinning in the tone pot. I cant figure out how to get it to re-attach. I dont know if I've broken it or just have figurted out how to reassemble it!

[alembic1989]

Looks like you'll be needing a new stack pot my friend.

[Bigwan]

Yes new pot required, but in better news that one isn't attached to the preamp pcb so it's a relatively easy fix! Brightside!

[doc40hz]

[quote name='Bigwan' timestamp='1480780788' post='3187106']
Yes new pot required, but in better news that one isn't attached to the preamp pcb so it's a relatively easy fix! Brightside!
[/quote]

Argh - It looks like it IS attached the preamp pcb. This could be an expensive fix!

[Burns-bass]

I think the guitar is worthless. I'll offer you £10.

[Bigwan]

[quote name='doc40hz' timestamp='1480790442' post='3187212']


Argh - It looks like it IS attached the preamp pcb. This could be an expensive fix!
[/quote]

Must have revised the preamp. On my Sire the volume/tone and blend were not on the pcb. That does make things more awkward...

[Grangur]

[quote name='doc40hz' timestamp='1480790442' post='3187212']


Argh - It looks like it IS attached the preamp pcb. This could be an expensive fix!
[/quote]

What impedance are the pots?
Maybe you can use a standard stacked pot and solder fly-leads to the PCB?