Jump to content
Why become a member? ×

Ampeg SVT Heritage Fault advive needed


slystewart
 Share

Recommended Posts

I have had this amp from new now just over two years old ,just before christmas at a gig on stage for 3 songs then no sound out of the amp with flashing green / red fault light on
Got through the night and today checked it out to find at the back of the amp a red bias light on all of the time on the left side, turn it down a bit power on the amp it works but a hum there all the time alter the bias up a bit and amp shuts down to red /green fault any one at ideas thanks Stewart

Link to comment
Share on other sites

Sounds like you have a faulty power valve. There is a monitor system connected to each output valve, if even one is faulty it cuts the relay that switches the ht circuit on and prevents damage to the amp. There are a set of resistors ,one for each power valve across which the bias current in monitored which can end up blown if the valve goes short circuit.
Suggest you get the amp to a tech who can test the valves and check out the cathode resistors and replace if necessary.
Ive done a few of these on svt 2s which use the same circuit. It's not the end of the world but does need to be done by someone who knows what their doing due to the very high voltages within these amps.
If you're in the Bristol area drop me a line.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...