timmo Posted January 9, 2017 Share Posted January 9, 2017 I have an Ashdown valve amp. There is a buzz on every G sharp on each string. I also have an Eden solid state amp. It sounds perfect on that. The amp is an Ashdown CTM-15. Anyone got an idea as too why please? Every other note sounds good.I am also getting a bit of buzzing that seems a little more than i used to when no notes are played. Quote Link to comment Share on other sites More sharing options...
cheddatom Posted January 10, 2017 Share Posted January 10, 2017 weird. If it's buzzing on certain notes that would normally be something physically rattling, but this is a separate head... do you always put the head on top of the cab? Can you try it as far away from the cab as possible? Quote Link to comment Share on other sites More sharing options...
MoonBassAlpha Posted January 10, 2017 Share Posted January 10, 2017 I think the casing can vibrate on these. It might be worth leaning your elbow on the top of it whilst playing the g#. If that is it, I'd wedge a bit of card in it or a dot of silicone sealant. Quote Link to comment Share on other sites More sharing options...
timmo Posted January 10, 2017 Author Share Posted January 10, 2017 (edited) Thanks. It is actually a DH 15 110, which is the same as a CTM 15 except the cab. I will unclip it and put it back together. There may be some vibration if I havent got it seated properly. I will also try the arm on top Edited January 10, 2017 by timmo Quote Link to comment Share on other sites More sharing options...
timmo Posted January 10, 2017 Author Share Posted January 10, 2017 I unclipped the head from the cab, and put it back together. It worked. Maybe it was not seated properly The G# must have been the vibratation point Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.