markdavid Posted January 28, 2017 Share Posted January 28, 2017 Hi all Have done a mod on my Badmonkey pedal, i read that removing the .047uf capacitor found at c5 on the circuit board removes the mid range hump , i did this mod and now although the mid range hump is gone the treble control on the pedal does not work,it is like the treble is maxxed regardless of how much i have the treble control turned up. There are 2 possible reasons that i can think of why this would happen, 1st is that i have cooked a component with the soldering iron when removing the capacitor, the 2nd possibility is that the .047uf capacitor controls the treble control and removing this capacitor has resulted in the treble being maxxed , what do you think? Quote Link to comment Share on other sites More sharing options...
6v6 Posted January 29, 2017 Share Posted January 29, 2017 Can you link the circuit diagram you're working from? Hard to comment on the component removal without seeing a schematic but it sounds like the capacitor was part of the tone stack, I'd expect to replace it with a different value vs just removing it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.