Jump to content
Why become a member? ×

The Yamaha BB mega-thread


Al Krow

Recommended Posts

34 minutes ago, Cuzzie said:

What ‘classic’ or ‘traditional’ P bass sound are we talking

’52, ‘58, ‘65, ‘70s 

We are talking 50-80 years ago in range where lots was happening 

Fenders have a 'fender' tone, you know it when you hear it, from countless recordings.

Yamaha's have a P bass sound, thumpy etc, but distinctively different from a 'fender' tone. Yamaha's have their own voicings.

Link to comment
Share on other sites

2 hours ago, Al Krow said:

Are you sure that is correct dB?

My P35 sounds pretty close to my BB1025 and certainly when @dave_bass5 was over we both felt that the 1025 was the slightly 'flatter' of the two and closer to what might be thought of as a traditional P bass sound. And certainly flatter / more P bass-like still is the BB425 which I've previously had and Dave still owns.

The 1025 pickups are very high output and a lot darker then a regular P pickup. The newer pups are supposed to be more vintage voiced and sounded quite a bit brighter when I auditioned a 435 vs a 2025X in store.

If you want that old school precision and flats sound though, you're better off with a Fender.

Link to comment
Share on other sites

So today I had a chance to try out a few bass guitars at Wunjo bass in London. Going in there I was dead set on a Fender Aerodyne however having had a chance to play it along with a Yamaha BB734 I was utterly disappointed in it, and actually blown away by how good the Yamaha was!

Looks like I'll spring for a BB then, but I have a few questions.

I tried the BB734 and it just felt really nice to play and the electronics sounded fantastic to my ears. However I couldn't help but notice that there's a lot of buzz around the vintage BB models. How do the older BBs stack up to the 734 in terms of sound? Do they also feel roughly the same to play - ie neck profile, body shape, and the like?

As it stands I'll either try to find a used 734 in black (another thing that swung me - it looks gorgeous) or get Wunjo to order one in for me since they only had a used brown one available.

Link to comment
Share on other sites

1 hour ago, hooky_lowdown said:

Fenders have a 'fender' tone, you know it when you hear it, from countless recordings.

Yamaha's have a P bass sound, thumpy etc, but distinctively different from a 'fender' tone. Yamaha's have their own voicings.

What you say is never in doubt, but within that ‘Fender Tone’ there are various iterations, so depending on which you want, your Yammy or any other bass will be closer or further away, and as someone else has mentioned, the latest Yammy models have regular pick up sizes, so changing pick ups and sound etc has never been easier

Link to comment
Share on other sites

@razor5cl I'd say the key difference between the BB 734A and the older BBs is that the 734A is both active and passive which gives it greater tonal versatility. Body shape etc has been more of a subtle refinement rather than a wholesale change from the Series 2. Most of the earlier models (Series 2, Series 1 and earlier) are either mostly purely passive or a minority that are purely active. The 734A gives you the best of both worlds on that score.

Combine that with a capable vol, blend & 3 band EQ and P/J configuration and you have a very capable bass indeed. 

Here's a demonstration of my old bass(!) being played by @TJ Spicer, which will give you a good feel for its tonal variety and capability:

  

Edited by Al Krow
  • Like 2
Link to comment
Share on other sites

9 minutes ago, Al Krow said:

@razor5cl I'd say the key difference between the BB 734A and the older BBs is that the 734A is both active and passive which gives it a greater tonal versatility. Body shape etc has been more of a subtle refinement rather than a wholesale change from the Series 2. Most of the earlier models (Series 2, Series 1 and earlier) are either mostly purely passive or a minority that are purely active. The 734A gives you the best of both worlds on that score.

Combine that with a capable VVT EQ and P/J configuration and you have a very capable bass indeed. 

Here's a demonstration of my old bass(!) being played by @TJ Spicer, which will give you a good feel for its tonal variety and capability:

  

Thanks Al, very useful! Really preferring passive tones at the moment, so I think the 435 would be fine for me (when I can afford one....). 

Meant to ask before, have they managed to shed any weight for the 3 series? 

Link to comment
Share on other sites

5 minutes ago, TRBboy said:

Thanks Al, very useful! Really preferring passive tones at the moment, so I think the 435 would be fine for me (when I can afford one....). 

Meant to ask before, have they managed to shed any weight for the 3 series? 

Well my BB P35 is heavier than my BB 1025. Both purely passive. So I'd say "no" based on that very limited sample"! :) 

  • Like 1
Link to comment
Share on other sites

36 minutes ago, TRBboy said:

Meant to ask before, have they managed to shed any weight for the 3 series? 

In my experience, yes. My 735 is definitely a bit lighter than my old 1025x. And that’s with the addition of the preamp and battery in the 735 which the passive 1025 didn’t have. But with wood being an organic substance and natural variety at play I’d suggest trying out a few 434s in person if possible to make sure you get one that feels comfortable to you.

Link to comment
Share on other sites

54 minutes ago, Cuzzie said:

What you say is never in doubt, but within that ‘Fender Tone’ there are various iterations, so depending on which you want, your Yammy or any other bass will be closer or further away, and as someone else has mentioned, the latest Yammy models have regular pick up sizes, so changing pick ups and sound etc has never been easier

The various iterations of fender pickups etc I don't think apply, because all are so widely known through songs across the decades that the Fender tone is so distinctive all can be grouped under the umbrella of the 'fender tone'.

The yammies on the other hand have their own tone, some might be closer than others to the 'fender tone' but none I believe would be confused for any iteration of the 'fender tone'.

Link to comment
Share on other sites

Re: the Fender v Yamaha “P tone” topic, I compared a BBP35 to a Fender Am Pro Precision 5er a couple of weeks at Wunjo and there was a definite tonal difference between the two. The Yammy was darker and rounder, whilst the Fender was brighter and more woody sounding which (and I realise this is heresy on this thread) I preferred. 

The Fender was also a bit wider at the nut with a slightly chunkier neck overall which, unexpectedly, I also preferred. As a disclaimer, I should say that I’m 6’8” with absolutely massive hands so your mileage definitely may vary!

  • Like 1
Link to comment
Share on other sites

7 minutes ago, CameronJ said:

In my experience, yes. My 735 is definitely a bit lighter than my old 1025x. And that’s with the addition of the preamp and battery in the 735 which the passive 1025 didn’t have. But with wood being an organic substance and natural variety at play I’d suggest trying out a few 434s in person if possible to make sure you get one that feels comfortable to you.

I agree with you in part - my 735A was definitely a bit lighter than my BB P35, but actually only comparable to my 1025.

A fairer comparison is perhaps between fully passive basses. The wood in the body of the 735A will have been reduced to make way for a larger EQ housing area i.e. more air and less wood, so you might well expect the body to be a bit lighter on that particular model. 

Edited by Al Krow
Link to comment
Share on other sites

45 minutes ago, CameronJ said:

Re: the Fender v Yamaha “P tone” topic, I compared a BBP35 to a Fender Am Pro Precision 5er a couple of weeks at Wunjo and there was a definite tonal difference between the two. The Yammy was darker and rounder, whilst the Fender was brighter and more woody sounding which (and I realise this is heresy on this thread) I preferred. 

The Fender was also a bit wider at the nut with a slightly chunkier neck overall which, unexpectedly, I also preferred. As a disclaimer, I should say that I’m 6’8” with absolutely massive hands so your mileage definitely may vary!

Fenders also sound 'warmer' than yamaha's imho.

My main bass is a yammie with fender pickups, just because I like a 'warmer' tone, instead of the 'darker' stock yammie tone.

Edited by hooky_lowdown
Link to comment
Share on other sites

50 minutes ago, CameronJ said:

Re: the Fender v Yamaha “P tone” topic, I compared a BBP35 to a Fender Am Pro Precision 5er a couple of weeks at Wunjo and there was a definite tonal difference between the two. The Yammy was darker and rounder, whilst the Fender was brighter and more woody sounding which (and I realise this is heresy on this thread) I preferred. 

The Fender was also a bit wider at the nut with a slightly chunkier neck overall which, unexpectedly, I also preferred. As a disclaimer, I should say that I’m 6’8” with absolutely massive hands so your mileage definitely may vary!

Pee wee

  • Haha 1
Link to comment
Share on other sites

14 minutes ago, hooky_lowdown said:

Fenders also sound 'warmer' than yamaha's imho.

My main bass is a yammie with fender pickups, just because I like a 'warmer' tone, instead of the 'darker' stock yammie tone.

Tbf there are good reasons why Fender are the best selling bass on the planet, and why so many other brands make a good living ripping off their designs. 

Wouldn't the world be a boring place if everyone had the same taste in basses, genres of music, amps, cabs etc. etc. 

Plenty of space for us to all enjoy the basses we enjoy. Personally I think my Yammys are just great! And I have no itch at all to buy a Fender. A Spector EuroLX neck through on the other hand... 😄 

Link to comment
Share on other sites

35 minutes ago, hooky_lowdown said:

Fenders also sound 'warmer' than yamaha's imho.

My main bass is a yammie with fender pickups, just because I like a 'warmer' tone, instead of the 'darker' stock yammie tone.

Well there we go. I’d consider “warm” and “dark” to be in a similar ballpark as far as my descriptors of tone. Which just highlights how subjective this all is.

Perhaps your “warm” = my “woody”?

Edited by CameronJ
Link to comment
Share on other sites

1 hour ago, CameronJ said:

The Fender was also a bit wider at the nut with a slightly chunkier neck overall which, unexpectedly, I also preferred. As a disclaimer, I should say that I’m 6’8” with absolutely massive hands so your mileage definitely may vary!

Interesting point about the neck, though, 'cos the flatter / really comfortable to play (particularly on 5ers) / not a baseball bat neck of the Yammys is a feature that a LOT of Yammy fans (me included) love. If a chunkier neck is what you're now preferring, and...

On 22/07/2019 at 20:02, CameronJ said:

On paper, all of what you’ve said is true. But alas, in my dotage I find myself after a more traditional Jazz aesthetic and true single coils - noise be damned!

...sounds like you could be heading back to Fender and, based on your comments a few weeks back, forget PJs, you could be going straight to J(ail).

😊

Link to comment
Share on other sites

It’s a strange one. The neck on my Dingwall Super P is very much in the flat ballpark, even more so than my Yammy, yet I find it incredibly comfortable. But the Ding has 19mm bridge spacing and a slightly wider nut than my Yamaha BB. The nut width and string spacing on the Fender I played felt pretty similar to my Dingwall, which is probably why it felt so comfortable to me. The Fender’s neck was definitely a bit thicker/chunkier though. The Yammy BBs seem to have a narrower nut width and 18mm bridge spacing if I’m not mistaken, before we even get into the thickness of the neck itself. Lots of variables.

Link to comment
Share on other sites

Well it's a funny ol' world. You were the person, with your excellent review of your 1025X, which you kindly took the time to pm me about, and subsequent joint trip to the Yammy store where I picked up my vintage white 1025, that weened me of Fender basses (possibly for good) and started my love affair with Yammys a couple of years back; and now you're heading back in the opposite direction.

Wheels turn, eh?

You'll be wearing flared jeans next.

Link to comment
Share on other sites

32 minutes ago, Al Krow said:

Well it's a funny ol' world. You were the person, with your excellent review of your 1025X, which you kindly took the time to pm me about, and subsequent joint trip to the Yammy store where I picked up my vintage white 1025, that weened me of Fender basses (possibly for good) and started my love affair with Yammys a couple of years back; and now you're heading back in the opposite direction.

Wheels turn, eh?

You'll be wearing flared jeans next.

To be fair, at that time I’d never played a Fender bass. I think I’ve been subconsciously avoiding the big F for years. It’s only in the past 6 months or so that I’ve developed any kind of appreciation or even first hand experience of Fender basses.

But yeah, my tastes have slowly veered toward the more traditional over the past couple of years so before long I’m sure my only bass will be a 200 year old upright xD

Link to comment
Share on other sites

The best thing about my Yamahas (well, one of the best) is how they do the P bass thing well, but without the Fender ‘mud’.

The slight modern twist on the P tone is really what’s keeping me playing my P34. It has the character but also a slight bump somewhere that gives my pick playing a bit of finger thump. The 425 sounds slightly more aggressive, but both seem to have the same character in the low end.

As for necks, I’m a lover of narrow necks, so when I saw the P34 is only 40mm at the nut I was very happy. After playing it for a few days, and then my Fender P, which is wider but still what I would call narrow at 43mm, I do find the Fender more comfortable to play. 

Link to comment
Share on other sites

Tbf Fender do own a brand that have just released a rather tasty reverse PJ (but active only)...

 

image.png.7a33a34f21f9207e09911869966ea8ff.png

 

...and have just replaced the previously pointy headstocks on these basses with something that looks remarkably like a Yammy BB's headstock (seamlessly back on message 😀)

image.png.71ca174f9a9666a99bf09623349e9810.png

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...