AndyTravis Posted March 23, 2020 Share Posted March 23, 2020 5 minutes ago, TJ Spicer said: I’m almost definitely going to compare the two when the Warwick builds are available - and it’ll undoubtedly end up on my YT channel. That’s the thing I always find so difficult with Sadowskys, finding the right colours outside of custom. Took me 5 years for a PJ5 in Olympic white to come up! Worth the wait - though the BB735a did admirably in the ‘5 string PJ’ space in the arsenal! I could just buy the uv70 for sale here and book a respray at a later date. Quote Link to comment Share on other sites More sharing options...
TJ Spicer Posted March 23, 2020 Share Posted March 23, 2020 4 minutes ago, AndyTravis said: I could just buy the uv70 for sale here and book a respray at a later date. I used my UV70 on a session the other day and it sounded great (it always does!). The UV70 was the bass that created the Sadowsky fanatic in me - I was sold the moment I plugged it in (and I was 14/15 at the time!). Again it was between that and a 2024x. The long term struggle between Yamaha and Sadowsky is a repeated theme throughout my bass playing career 😂 Quote Link to comment Share on other sites More sharing options...
Al Krow Posted March 23, 2020 Author Share Posted March 23, 2020 (edited) I do believe that Jon Willis (aka Dr Tone) is using a Yammy Attitude on many of his clips. Just wondering whether this Geddy Lee preset on Helix is going to render my recently acquired VT Bass DI somewhat otiose? Edited March 23, 2020 by Al Krow Quote Link to comment Share on other sites More sharing options...
Muzz Posted March 24, 2020 Share Posted March 24, 2020 15 hours ago, Al Krow said: I do believe that Jon Willis (aka Dr Tone) is using a Yammy Attitude on many of his clips. Just wondering whether this Geddy Lee preset on Helix is going to render my recently acquired VT Bass DI somewhat otiose? Where might one acquire the details of this preset/settings? I neeeeeeed to have it... Quote Link to comment Share on other sites More sharing options...
TRBboy Posted March 24, 2020 Share Posted March 24, 2020 Started trying to design the pickguard for my apocalypse project last night... Its surprising how hard it is to do! I ended up looking at pictures of BB1500's and loosely used that for design inspiration. Quote Link to comment Share on other sites More sharing options...
Al Krow Posted March 24, 2020 Author Share Posted March 24, 2020 52 minutes ago, Muzz said: Where might one acquire the details of this preset/settings? I neeeeeeed to have it... I'm assuming you have a Helix? If so then his patches are available for download at http://drtonelab.com/ Quote Link to comment Share on other sites More sharing options...
Muzz Posted March 24, 2020 Share Posted March 24, 2020 1 hour ago, Al Krow said: I'm assuming you have a Helix? If so then his patches are available for download at http://drtonelab.com/ Oh my worrrrrrd...now there's a Stomptastic resource; thanks for that, Al 👍 Quote Link to comment Share on other sites More sharing options...
dave_bass5 Posted March 24, 2020 Share Posted March 24, 2020 4 hours ago, Muzz said: Oh my worrrrrrd...now there's a Stomptastic resource; thanks for that, Al 👍 In that case I’d look here as well Quote Link to comment Share on other sites More sharing options...
TRBboy Posted March 25, 2020 Share Posted March 25, 2020 (edited) If anyone's interested, bit more progress over the past couple of days. Rushed to get the last coat of laquer on before it got dark, and I don't know if I've buggered it up a bit though.... 😬 We'll see in the morning! 🤞 Edited March 25, 2020 by TRBboy 2 Quote Link to comment Share on other sites More sharing options...
Scotchman Posted March 27, 2020 Share Posted March 27, 2020 (edited) I forgot about this site! David Neely (Hollywood) did this refinish, for me. Lake Placid Blue fretless Yamaha BB5000 (1987 Taiwan). I have two white MIJ BB5000s. Edited March 27, 2020 by Scotchman Add picture 5 Quote Link to comment Share on other sites More sharing options...
TRBboy Posted April 6, 2020 Share Posted April 6, 2020 Finally got around to putting my BBN5 back together last night, the pickguard still needs finishing and fitting properly, headstock decal needs doing, soldering electronics and a general setup and clean, but I think it's looking pretty bloody good! Quite chuffed tbh. 😊 5 Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted April 6, 2020 Share Posted April 6, 2020 27 minutes ago, TRBboy said: Finally got around to putting my BBN5 back together last night, the pickguard still needs finishing and fitting properly, headstock decal needs doing, soldering electronics and a general setup and clean, but I think it's looking pretty bloody good! Quite chuffed tbh. 😊 Very nice 1 Quote Link to comment Share on other sites More sharing options...
Al Krow Posted April 6, 2020 Author Share Posted April 6, 2020 Good job!! 👍 Are those the original knobs? Just wondering whether a more trad black and white would sit better with the black pups and your PG? 1 Quote Link to comment Share on other sites More sharing options...
TRBboy Posted April 6, 2020 Share Posted April 6, 2020 24 minutes ago, Al Krow said: Good job!! 👍 Are those the original knobs? Just wondering whether a more trad black and white would sit better with the black pups and your PG? Thanks! No, the original knobs were gold. I ordered a cream pickguard and cream knobs, thinking it would all match beautifully, but clearly they're nowhere near! 😂 It'll do for now, I might think about getting some white knobs instead though, would be closer to the pickguard colour than these. Quote Link to comment Share on other sites More sharing options...
Al Krow Posted April 6, 2020 Author Share Posted April 6, 2020 Ah, I see. Other than that one finishing touch, it's come out really well! 1 Quote Link to comment Share on other sites More sharing options...
Guest MoJo Posted April 6, 2020 Share Posted April 6, 2020 1 hour ago, TRBboy said: Finally got around to putting my BBN5 back together last night, the pickguard still needs finishing and fitting properly, headstock decal needs doing, soldering electronics and a general setup and clean, but I think it's looking pretty bloody good! Quite chuffed tbh. 😊 Nice job. Quote Link to comment Share on other sites More sharing options...
therealting Posted April 6, 2020 Share Posted April 6, 2020 2 hours ago, TRBboy said: Finally got around to putting my BBN5 back together last night, the pickguard still needs finishing and fitting properly, headstock decal needs doing, soldering electronics and a general setup and clean, but I think it's looking pretty bloody good! Quite chuffed tbh. 😊 Very nice. Needs tort 😉 1 Quote Link to comment Share on other sites More sharing options...
Al Krow Posted April 6, 2020 Author Share Posted April 6, 2020 1 hour ago, therealting said: Very nice. Needs tort 😉 You can have the tort PG from the recent PJ addition to my herd (it's my "active Yammy BB") - I'm already fancying something a bit different and a bit less...er well...less tort 😁 1 Quote Link to comment Share on other sites More sharing options...
TRBboy Posted April 13, 2020 Share Posted April 13, 2020 Hey guys! Finally did the finishing bits on my BBN5 yesterday, really pleased with it overall! Not quite sure what to do about a headstock decal yet, or maybe just leave as is. Maybe one of the 3d roundals off the newer BB's would look good? 5 Quote Link to comment Share on other sites More sharing options...
songofthewind Posted April 13, 2020 Share Posted April 13, 2020 Neat job! What is the paint? Looks a wee bit like Tuff Cab. 1 Quote Link to comment Share on other sites More sharing options...
TRBboy Posted April 13, 2020 Share Posted April 13, 2020 (edited) 14 minutes ago, songofthewind said: Neat job! What is the paint? Looks a wee bit like Tuff Cab. I wanted this sort of colour all along, in a matt finish, but it was quite hard to find. I ended up taking a bit of a gamble and getting some graffiti paint! It's the Montana Black range, loads of colour options and it went on really nicely! It's a nitro-combination paint. Spayed a few coats on and then a few coats of matt polyurethane laquer to protect it. Seems to have worked pretty well! Edited April 13, 2020 by TRBboy 3 Quote Link to comment Share on other sites More sharing options...
2elliot Posted April 16, 2020 Share Posted April 16, 2020 Forgot to say... I was watching a Hooky & Jack Bates live Q&A last week and the question regarding his new signature bass was asked several times. Jack said it was supposed to be released now ish but had to be put back due to the current pandemic. Soooooo.... new Yamaha Hooky bass (BB1200S) later in the year. Excellent! Quote Link to comment Share on other sites More sharing options...
TheGreek Posted April 16, 2020 Share Posted April 16, 2020 No longer a member of this club...sold my BBN4 11 recently...how can they build such good basses for the money??? Are "Fender" stickers expensive to produce? If not, how do they charge so much more for basses of, IMO, lesser quality? Quote Link to comment Share on other sites More sharing options...
Al Krow Posted April 16, 2020 Author Share Posted April 16, 2020 4 minutes ago, TheGreek said: No longer a member of this club...sold my BBN4 11 recently...how can they build such good basses for the money??? Are "Fender" stickers expensive to produce? If not, how do they charge so much more for basses of, IMO, lesser quality? Ah Mick, if you read the small print it says the club is open to all current and former owners of Yamaha BBs, so I think you have lifetime membership and will always be very welcome! Congrats on getting yours away, particularly during lockdown! Quote Link to comment Share on other sites More sharing options...
krispn Posted April 16, 2020 Share Posted April 16, 2020 On 13/04/2020 at 13:52, TRBboy said: I wanted this sort of colour all along, in a matt finish, but it was quite hard to find. I ended up taking a bit of a gamble and getting some graffiti paint! It's the Montana Black range, loads of colour options and it went on really nicely! It's a nitro-combination paint. Spayed a few coats on and then a few coats of matt polyurethane laquer to protect it. Seems to have worked pretty well! I’ll check these guys out for paint if I decide to redo my ‘tweaker’ bass! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.