Weird War Posted October 27, 2008 Share Posted October 27, 2008 (edited) Hi I'm upgrading to a bigger rig so this has to go. It's a great combo for small gigs and rehearsals, and comes in excellent condition. It's almost 3 years old and has been used sparingly in that time. It's a comfortable one-hand carry over short distances, up stairs at gigs and so forth (your guitarist will still whinge about lifting it though, naturally). The carpet covering attracts a certain amount of fluff over time, but does its job in protecting the amp. N.B. this model does not have a compressor, unlike the latest version. However, it does come with a kettle lead I'm looking for [size=5][b]£100[/b][/size] collected from SE London. You'd be welcome to try it out, of course, over a cuppa. Please PM me if you're interested. Here's the blurb and spec from Ashdown: Ashdown Electric Blue bass amplification loads legendary Ashdown tone into an affordable new amp head and a pair of high-performance, high-value combos. The EB 12-180 1 x 12" combo uses a 180 Watts RMS fan-cooled fast-transient power stage, and a fully-featured bass preamplifier with inputs for both active and passive instruments, an illumunated VU meter, 5 band EQ with Bright and Deep switches, a front panel-mounted balanced DI output for connection to a PA or recording console, an FX loop, a tuner/line output and the classic Ashdown sub-harmonic generator. A high-performance Ashdown BlueLine bass driver ensures exceptional attack, clarity and low-end performance, while an extension speaker output can be used to connect an additional cabinet for use in larger venues. The cabinet is finished in a tough, scuff-proof carpet covering with protective corners and a kick-proof metal grille. [u]Specifications [/u] Power Output (RMS) 180W Power Requirement 230 /115v Speaker Configuration 1 x 12" BlueLine speaker Frequency Response -3dB at 33Hz and 25KHz Speaker Outputs Minimum impedance 4 Ohms High Instrument Input Impedance 3.9MOhms / Input range 150mV - 20V p-p Low Instrument Input Impedance 10KOhms / Input range 300mV - 40V p-p Line Input Impedance 22k Ohms / Input level 0dBu nominal DI Output 600 Ohms balanced / Level -20dBu nominal Tuner Output Impedance 22k Ohms, level 0dBu nominal Signal to noise Better than 80dB (EQ flat) EQ Bass +/-15dB @ 100Hz Lo Mid +/-15dB @ 220Hz Middle +/-15dB @ 660Hz Hi Mid +/-15dB @ 1.6kHz Treble +/-15dB @ 7kHz shelving Deep +8dB @ 50Hz Bright +10dB @ 10kHz Effects Send Impedance 22k Ohms / Level 0dBu nominal Effects Return Impedance 22k Ohms / Level 0dBu nominal Distortion Less than 0.5% THD H x W x D (mm) 501 x 474 x 300 Weight (kg) 27 Edited November 9, 2008 by Weird War Link to comment Share on other sites More sharing options...
Weird War Posted November 1, 2008 Author Share Posted November 1, 2008 (edited) [b][size=3]Tull[/size] [/b]bump for lower price: Edited November 1, 2008 by Weird War Link to comment Share on other sites More sharing options...
josh3184 Posted November 1, 2008 Share Posted November 1, 2008 good amp this, gigged with a similar one for quite some time! Good price too methinks Link to comment Share on other sites More sharing options...
Weird War Posted November 3, 2008 Author Share Posted November 3, 2008 (edited) Final [size=4]SLY[/size] bump Edited November 3, 2008 by Weird War Link to comment Share on other sites More sharing options...
clauster Posted November 3, 2008 Share Posted November 3, 2008 Bargain price for a great little rehearsal/jam cambo! Link to comment Share on other sites More sharing options...
Recommended Posts