blue Posted May 17, 2017 Share Posted May 17, 2017 I have downloaded the Toneprint app to my phone. So what is the next step to get a decent preset? Blue Quote Link to comment Share on other sites More sharing options...
Osiris Posted May 17, 2017 Share Posted May 17, 2017 (edited) First, find the appropriate tone prints in the app for you pedal. [size=4]Select the specific tone print you want to try from the list available for your particular pedal - there are different tone prints for the full sized pedals and the mini versions, so double check that you have selected the correct pedal within the app. [/size] Next, switch off any other pedals in your signal chain, but make sure that the chorus is on. If your bass has more than one pickup, solo one of them (it doesn't matter which on my jazz) and make sure your basses volume control is on full. Point the phones speaker towards the pickup, holding your mobile as close to the pickup as you can. It gets a bit noisy but don't worry about that. Tap the button on the app that is marked "beam to pedal" or something like that. You'll hear what sounds like an old dial up modem noise for a couple of seconds and the red light on the pedal will flash green a few times. Once pedal light reverts back to being constantly red, that's it, you're done. From beaming the tone print to being able to use it takes no more than a few seconds. Rinse and repeat to try another tone print! Edited May 17, 2017 by Osiris Quote Link to comment Share on other sites More sharing options...
bartelby Posted May 17, 2017 Share Posted May 17, 2017 Make sure the volume is up on your phone too. It took me longer than it should have to work out that bit... Quote Link to comment Share on other sites More sharing options...
Osiris Posted May 17, 2017 Share Posted May 17, 2017 [quote name='bartelby' timestamp='1495004148' post='3300276'] Make sure the volume is up on your phone too. It took me longer than it should have to work out that bit... [/quote] Oh yes, I forgot to add that Quote Link to comment Share on other sites More sharing options...
blue Posted May 17, 2017 Author Share Posted May 17, 2017 (edited) [quote name='Osiris' timestamp='1495001924' post='3300250'] First, find the appropriate tone prints in the app for you pedal. [size=4]Select the specific tone print you want to try from the list available for your particular pedal - there are different tone prints for the full sized pedals and the mini versions, so double check that you have selected the correct pedal within the app. [/size] Next, switch off any other pedals in your signal chain, but make sure that the chorus is on. If your bass has more than one pickup, solo one of them (it doesn't matter which on my jazz) and make sure your basses volume control is on full. Point the phones speaker towards the pickup, holding your mobile as close to the pickup as you can. It gets a bit noisy but don't worry about that. Tap the button on the app that is marked "beam to pedal" or something like that. You'll hear what sounds like an old dial up modem noise for a couple of seconds and the red light on the pedal will flash green a few times. Once pedal light reverts back to being constantly red, that's it, you're done. From beaming the tone print to being able to use it takes no more than a few seconds. Rinse and repeat to try another tone print! [/quote] Thanks Osiris & Bartel Blue Edited May 17, 2017 by blue Quote Link to comment Share on other sites More sharing options...
lee650 Posted May 18, 2017 Share Posted May 18, 2017 Just a quick question! If you have the TC Corona,could you use a toneprint from the Vortex pedal so you can have chorus/flanger on one pedal? 😁 Quote Link to comment Share on other sites More sharing options...
Osiris Posted May 19, 2017 Share Posted May 19, 2017 [quote name='lee650' timestamp='1495120643' post='3301451'] Just a quick question! If you have the TC Corona,could you use a toneprint from the Vortex pedal so you can have chorus/flanger on one pedal? [/quote] No idea, maybe try it and see? My guess is that it wouldn't load - just don't blame me if it kills the pedal Quote Link to comment Share on other sites More sharing options...
Osiris Posted May 19, 2017 Share Posted May 19, 2017 [quote name='blue' timestamp='1495042154' post='3300824'] Thanks Osiris & Bartel Blue [/quote] Did it work? Quote Link to comment Share on other sites More sharing options...
blue Posted May 21, 2017 Author Share Posted May 21, 2017 [quote name='Osiris' timestamp='1495193120' post='3302014'] Did it work? [/quote] Haven't tried it yet. I'll let you know. Blue Quote Link to comment Share on other sites More sharing options...
blue Posted May 22, 2017 Author Share Posted May 22, 2017 [quote name='Osiris' timestamp='1495193120' post='3302014'] Did it work? [/quote] Works like a charm. The trick is finding pre-sets you can apply to your work. Blue Quote Link to comment Share on other sites More sharing options...
Osiris Posted May 22, 2017 Share Posted May 22, 2017 [quote name='blue' timestamp='1495414521' post='3303566'] Works like a charm. The trick is finding pre-sets you can apply to your work. Blue [/quote][size=4][quote name='blue' timestamp='1495414521' post='3303566'][/size] Works like a charm. The trick is finding pre-sets you can apply to your work. Blue [/quote] That's good to hear. I don't have the Corona chorus pedal although it looks great, but I recently picked up a TCE Spectracomp and have been having great fun trying out the different tone prints to see which ones work well for me. Quote Link to comment Share on other sites More sharing options...
blue Posted May 22, 2017 Author Share Posted May 22, 2017 [quote name='Osiris' timestamp='1495432693' post='3303586'] [size=4] That's good to hear. I don't have the Corona chorus pedal although it looks great, but I recently picked up a TCE Spectracomp and have been having great fun trying out the different tone prints to see which ones work well for me. [/quote] I have the Corona Chorus, Mini Delay and Hall Of Fame Reverb. Remember to save the pre-sets you like as favorites. Blue Quote Link to comment Share on other sites More sharing options...
gs_triumph Posted June 30, 2017 Share Posted June 30, 2017 (edited) [quote name='lee650' timestamp='1495120643' post='3301451'] Just a quick question! If you have the TC Corona,could you use a toneprint from the Vortex pedal so you can have chorus/flanger on one pedal? 😁 [/quote] Nope... Doesn't work. Just got a Corona tried it with a vortex toneprint. Doesn't load. Didn't expect it to but no harm in trying! 😀 However, the recently released SCF flanger toneprint for the Corona is a very nice subtle flanger... Can probably get it a bit more extreme with a few twiddles on the knobs. Edited June 30, 2017 by gs_triumph Quote Link to comment Share on other sites More sharing options...
CameronJ Posted June 30, 2017 Share Posted June 30, 2017 (edited) That's a bit of a shame. I have a Trinity T2 reverb and Hall of Fame TonePrints work with it. Edit: I suppose they are both the same "type" of effect though so it makes a bit more sense... Edited June 30, 2017 by CameronJ Quote Link to comment Share on other sites More sharing options...
Dood Posted June 30, 2017 Share Posted June 30, 2017 [quote name='lee650' timestamp='1495120643' post='3301451'] Just a quick question! If you have the TC Corona,could you use a toneprint from the Vortex pedal so you can have chorus/flanger on one pedal? [/quote] Buy the DreamScape, job's a good'un - and boy is it a great sounding pedal! Quote Link to comment Share on other sites More sharing options...
Dood Posted June 30, 2017 Share Posted June 30, 2017 [quote name='CameronJ' timestamp='1498848808' post='3327594'] That's a bit of a shame. I have a Trinity T2 reverb and Hall of Fame TonePrints work with it. Edit: I suppose they are both the same "type" of effect though so it makes a bit more sense... [/quote] Some Toneprints are indeed designed to work on like for like pedals - for example the Brian May Chorus works on both the Corona and Dreamscape pedals. Quote Link to comment Share on other sites More sharing options...
gs_triumph Posted June 30, 2017 Share Posted June 30, 2017 [quote name='dood' timestamp='1498850356' post='3327604'] Buy the DreamScape, job's a good'un - and boy is it a great sounding pedal! [/quote] Now you say! Just bought a Corona AND a vortex! 😁 Quote Link to comment Share on other sites More sharing options...
Dood Posted June 30, 2017 Share Posted June 30, 2017 [quote name='gs_triumph' timestamp='1498851942' post='3327614'] Now you say! Just bought a Corona AND a vortex! [/quote] It wouldn't hurt to have all three Quote Link to comment Share on other sites More sharing options...
gs_triumph Posted June 30, 2017 Share Posted June 30, 2017 No no no! Get out of my head! 😝 Quote Link to comment Share on other sites More sharing options...
Chris2112 Posted August 14, 2017 Share Posted August 14, 2017 Does anyone have any Coronoa toneprints they really like? I've loaded the Nathan East preset onto mine and I love it, it's very subtle and musical with a lot of depth and quality. It really brings out a different sound to the basic chorus mode. I also love the method of beaming toneprints to the pedal! Great fun. Quote Link to comment Share on other sites More sharing options...
gs_triumph Posted August 14, 2017 Share Posted August 14, 2017 Tom Hamilton sweet emotion is my favourite by far... Nice n subtle Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.