SH73 Posted July 19, 2017 Share Posted July 19, 2017 I've done lots of research on potentiometers but it seems it's horses for courses. Therefore I'm asking you reliable basschaters for advise. I want to wire up HSS configuration for my electric guitar project. The humbucker needs a push pull volume. So basically I'm after either one volume one tone or one volume two pots. The question is. Do I need a linear or log pot.I've been advised that volume pot needs to be 500kohm and tone pit 250kohm.Any suggestions? Quote Link to comment Share on other sites More sharing options...
Norris Posted July 19, 2017 Share Posted July 19, 2017 Have a look on the Seymour Duncan website - they have loads of wiring diagrams on there, which will also tell you which pots you'll need Quote Link to comment Share on other sites More sharing options...
SH73 Posted July 19, 2017 Author Share Posted July 19, 2017 [quote name='Norris' timestamp='1500459041' post='3337883'] Have a look on the Seymour Duncan website - they have loads of wiring diagrams on there, which will also tell you which pots you'll need [/quote] Cheees. I had. There're so many. I ordered a wiring kit from axetec Quote Link to comment Share on other sites More sharing options...
chris_b Posted July 19, 2017 Share Posted July 19, 2017 Audio taper pots and linear pots for even increase or decrease over the whole range of the movement. Quote Link to comment Share on other sites More sharing options...
SH73 Posted July 19, 2017 Author Share Posted July 19, 2017 Cheers chaps. Found a solution. Quote Link to comment Share on other sites More sharing options...
MoonBassAlpha Posted July 27, 2017 Share Posted July 27, 2017 Which did you go for? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.