Jump to content
Why become a member? ×

Unwanted slappy twang.


DJpullchord
 Share

Recommended Posts

I've got a bass and an amp, so far so good. But I'm finding that when I play quickly the strings are always catching on the top fret. You get mah?
Is it a matter of just controlling the right hand a little more? I'm assuming a lot of this twang will be lost in the band.
Do I need to play more gently?
Any thoughts much appreciated.

Link to comment
Share on other sites

This might sound silly but ...Have you tried playing softer to see if you can eradicate the noises?

If it means that you have to play that softly that you cannot hear what you are playing, then it may well be the bass needs setting up.

Link to comment
Share on other sites

Not silly at all. I play an acoustic guitar loads and am use to varying the dynamics with my right hand a bit. Does the electric bass not have much scope for differing the accent etc with the right hand? Is it a case of, play gently or even more gentlerer?
Maybe I just need to go softly softly and turn the amp up.

Link to comment
Share on other sites

Stick a compressor or limiter on it. That might make you play softer with no penalty to perceived loudness.

Or try raising the bridge ?

Chisel out the last fret? No fret no problem.

You can't exactly play that fret anyway so do away with it if it's causing you grief and you can't be arsed to change techniques.

Link to comment
Share on other sites

[quote name='DJpullchord' timestamp='1503243229' post='3356643']
Not silly at all. I play an acoustic guitar loads and am use to varying the dynamics with my right hand a bit. Does the electric bass not have much scope for differing the accent etc with the right hand? Is it a case of, play gently or even more gentlerer?
Maybe I just need to go softly softly and turn the amp up.
[/quote]

If you are used to varying the dynamics with your right hand ,and you are still getting these noises I would suggest that you take your bass to a tech to have it set up.

I am not the best for this sort of advice though ...throughout my 45 years of playing I have never understood the technicalities. I don't know what all the debate about tone and" heft" and all the other stuff people on here are experts in ...I have just plugged in and played ,using only the controls on my bass or amp to get it to sound how I want it to! :ph34r:

Edited by Raymondo
Link to comment
Share on other sites

[quote name='Steve Browning' timestamp='1503298982' post='3356931']
I'd get the set up done first. I suffered a similar issue and found it was a raised fret. Make sure your bass is properly set up before spending a lot of money on stuff you may not even need.
[/quote]

Good sense. You can check roughly if the frets are level by sighting along the fingerboard. Any that are obviously too high will stand out. Definitely worth getting it looked at by a repairer.

Link to comment
Share on other sites

I would seriously consider investing in the Fender bass Haynes manual. I spent years shying away from doing even the most basic stuff on my basses but bought this and it enabled me to do stuff like check the fingerboard relief (another possible source of your problem) but also how to fix it. I can now maintain my basses far better and even set them up (bar any filing that might be required).

Yours may not be a Fender but I should think much of the content is the same.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...