joescartwright Posted October 13, 2017 Share Posted October 13, 2017 Hi, So I know that if you have a 12ax7 in the preamp you can switch it out for a 12at7 or ay7 etc. Is there a similar thing with power amp valves? I've got a little valve amp for recording that uses 2 12ax7s in the preamp and 2 el84s in the power amp and I'm looking for a combination of valves that will give me just a touch more clean headroom, I never use the really dirty sounds anyway so thought it would be worth a try. Cheers for your help! Joe. Quote Link to comment Share on other sites More sharing options...
Dan Dare Posted October 13, 2017 Share Posted October 13, 2017 Speak to Watford Valves. They know their stuff an have very extensive stock. An amp with 2 EL84s is only going to be good for about 30w at most, so clean headroom is likely to be limited, whatever you do. Quote Link to comment Share on other sites More sharing options...
joescartwright Posted October 13, 2017 Author Share Posted October 13, 2017 Hero, Thanks mate! Yeah it doesn't need to go any louder than it does if it can just have a wider range of cleans available. Even if the output ends up being slightly lower I'd be happier without the really distorted sounds when stuff gets cranked. Quote Link to comment Share on other sites More sharing options...
BassBod Posted October 13, 2017 Share Posted October 13, 2017 5751 is a low gain version of 12ax7/ecc83, supposed to be 70%. I use them in SWR amps sometimes..makes the front end a bit less up front. Worth a try? Quote Link to comment Share on other sites More sharing options...
joescartwright Posted October 13, 2017 Author Share Posted October 13, 2017 Sounds worth a go to me! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.