Jump to content
Why become a member? ×

Recommended Posts

Posted (edited)

Jazz neck NOT Fender but with Fender Jazz decal fitted.

Bought for a project that never happened.

Beautiful figuring on the wood.

Don't know the manufacture but its a Jazz style width nut
The width at the tail is 64mm

Asking for £130 delivered in the UK

 

ding.jpg

Headb.JPG

Headf.JPG

jneck.JPG

tailb.JPG

Edited by sunfish
reload
Posted

Hi. Yes happy to ship to Germany but will have to find out the shipping cost. I don't know the manufacturer.

Posted

A few questions:
[list=1]
[*]Can you verify that the neck is straight (some figured necks are prone to twisting).
[*]Are the frets in good condition ?
[*]What size are the tuner holes ?
[*]Is it inch and a half at the nut ?
[*]Is the nut plastic or bone ?
[*]Was it ever on a bass ?
[/list]
Thanks for your time.
Regards,
Mark

Posted

Hi Mark

I bought it off ebay from someone who had been using it on a Fender Jazz. It didn't fit on my bass - VERY slightly too wide. so I didn't use it.

The neck is straight.
The frets look good. Just noticed a slight ding in the fretboard between fret 6 & 7. Tried to get a picture see if I can add it.




Tuner holes are 18mm

Nut is plastic and 38.1mm (1/1/2")

and the trussrod feels fine turns both ways with an allen key- but obviously Ive never had it on a bass

Hope this answers your questions OK.
Cheers

  • 4 weeks later...
  • Josh locked this topic
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...