spiltmilk_2000 Posted October 18, 2017 Share Posted October 18, 2017 Hi all, just wondering if anyone can offer advice on best position for my compressor on my board. I currently have it near the front end to smooth out the signal going into my octave and fuzz pedals. However this means my envelope filter isn’t as responsive as it might be and I have a hard time setting everything to unity. Wondering if the compressor should go at the end to prevent drastic volume changes when pedals are engaged? Is it just trial and error? Anyone experimented with a compressor at both ends? My signal chain is below... does it seem counter intuitive or glaringly silly? Any suggestions gratefully received! Bass press Volume wah... Boss tu2 tuner Darkglass supper symmetry compressor Boss oc3 octave Darkglass vintage ultra Darkglass duality fuzz Mxr envelope filter SA lunar phaser Tc shaker vibrato Tc flashback delay Quote Link to comment Share on other sites More sharing options...
Al Krow Posted October 18, 2017 Share Posted October 18, 2017 Hi there - I'm no expert but I've gone for a fairly traditional end of chain position for my compressor so that it can provide an overall more centred sound and deal with volume spikes. There was quite a [url="http://basschat.co.uk/topic/305772-where-to-place-your-compression-pedal-in-your-chain/"]useful little thread[/url] on this very topic earlier in the year and I think folk generally were opting for either the start or the end of the chain (and some for both!) with no "right" answer. Btw - you've got some very impressive gear listed. I see you're a bit of an Aguilar fan; if you're playing live in London in the near future let me know - I'd love to hear a DB 750 in action! Quote Link to comment Share on other sites More sharing options...
dannybuoy Posted October 18, 2017 Share Posted October 18, 2017 I’ve gone for putting mine first, but that’s with a low threshold and ratio for general smoothing, and a blend to keep my attack intact. I’m not using an envelope filter but I have tried one after the comp and it’s still perfectly playable. I think using a comp to even out volume levels from other pedals is the wrong application for a compressor. It’s a band aid that makes you ignore the fact your volume knobs just need tweaking, and you can end up with an overly squashed tone because one of your dirt pedals is set too high for example! Quote Link to comment Share on other sites More sharing options...
CameronJ Posted October 19, 2017 Share Posted October 19, 2017 [quote name='dannybuoy' timestamp='1508366812' post='3391801'] I’ve gone for putting mine first, but that’s with a low threshold and ratio for general smoothing, and a blend to keep my attack intact. I’m not using an envelope filter but I have tried one after the comp and it’s still perfectly playable. I think using a comp to even out volume levels from other pedals is the wrong application for a compressor. It’s a band aid that makes you ignore the fact your volume knobs just need tweaking, and you can end up with an overly squashed tone because one of your dirt pedals is set too high for example! [/quote] I largely agree with your sentiment here, but for certain pedals (particularly envelope filters with aggressive characteristics) a compressor is the most practical means of retaining the tone you’ve dialled in without running the risk of slapping woofers against grilles. I’m exaggerating a bit obviously! Quote Link to comment Share on other sites More sharing options...
totorbass Posted October 19, 2017 Share Posted October 19, 2017 [quote name='dannybuoy' timestamp='1508366812' post='3391801'] I've gone for putting mine first, but that's with a low threshold and ratio for general smoothing, and a blend to keep my attack intact. I'm not using an envelope filter but I have tried one after the comp and it's still perfectly playable. I think using a comp to even out volume levels from other pedals is the wrong application for a compressor. It's a band aid that makes you ignore the fact your volume knobs just need tweaking, and you can end up with an overly squashed tone because one of your dirt pedals is set too high for example! [/quote] Yes, plus the fact that after a distortion a comp will raise the noise. I used to put my comp after the EF for the reason mentionned above, but now I've changed my mind and put it first as you do. Quote Link to comment Share on other sites More sharing options...
T-Bay Posted October 19, 2017 Share Posted October 19, 2017 Mine is first in the chain as well, but I don't run envelope filters or wah pedals either. Quote Link to comment Share on other sites More sharing options...
Pinball Posted October 19, 2017 Share Posted October 19, 2017 [quote name='T-Bay' timestamp='1508393989' post='3391834'] Mine is first in the chain as well, but I don't run envelope filters or wah pedals either. [/quote] Mine is near the front but I have my tuner and Wah pedal in front. It just sounds better to my ear that way around. I do have other envelope filters but I don't feel the need to tame them. Quote Link to comment Share on other sites More sharing options...
totorbass Posted October 19, 2017 Share Posted October 19, 2017 A clean blend can be useful with ef's, too. Quote Link to comment Share on other sites More sharing options...
spiltmilk_2000 Posted October 19, 2017 Author Share Posted October 19, 2017 Thanks guys for all the advice. I think the chain seems sensible and worth persevering with... guess I just need to spend the time dialling it in with so many pedals. It’s all a bit new to me right now :-) Quote Link to comment Share on other sites More sharing options...
spiltmilk_2000 Posted October 19, 2017 Author Share Posted October 19, 2017 [quote name='Al Krow' timestamp='1508365111' post='3391787'] Btw - you've got some very impressive gear listed. I see you're a bit of an Aguilar fan; if you're playing live in London in the near future let me know - I'd love to hear a DB 750 in action! [/quote] Thanks Al... yes I love the db750. Really sounds like thunder but warm and tameable too. Unfortunately my bands are not gigging so much currently so it’s kind of semi-retired right now. Don’t think I could ever let it go even though my th500 with two sl112s does a pretty amazing job without destroying my back! :-) I saw someone selling a dB750 on here a while back for £750 so I nearly bought a spare! Steal of the century! Treat yourself to one... you won’t regret it :-) Quote Link to comment Share on other sites More sharing options...
spiltmilk_2000 Posted October 19, 2017 Author Share Posted October 19, 2017 And of course Al... if you’re ever over in Essex way and want to come and plug into it just say the word! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.