MuseMatt Posted May 25, 2009 Share Posted May 25, 2009 (edited) I have a Van der End myself and is plays amazingly well. Currently there's a particularly nice 4string jazz available from [url="http://bassmatters.nl/bassmatters_eng.html"]http://bassmatters.nl/bassmatters_eng.html[/url] for €1250 Alder/Walnut body, Maple Neck, Lindy Fralin pickups, VDE-2band active circuit. Active/passive switchable as far as I can see. Look in the gear porn section for my (15 year old!) Van der End! Edited May 25, 2009 by MuseMatt Quote Link to comment Share on other sites More sharing options...
dlloyd Posted May 26, 2009 Share Posted May 26, 2009 [quote name='JanSpeeltBas' post='497330' date='May 25 2009, 03:34 PM']Yes, the Robots at Warmoth's...years ago it was revealed Sadowsky's are parts-instruments - bodies & necks are aquired from suppliers and finished and assembled in Sadowsky's workshop.[/quote] Roger Sadowsky addressed this on Talk Bass a while back: [quote]I guess it is my turn to join this discussion: 1) Several people have posted and commented that Sadowsky uses Warmoth parts. I would like to address this for what I hope will be the last time. I did use some Warmoth parts during the 80's and have ordered an occasional neck from them for some of our repair customers during the years. However, Sadowsky has not used any Warmoth necks or bodies on their basses for at least the last 10 years. 2) Regarding subcontractors....Many instrument companies use subcontractors. It is very difficult to balance quality and maintain costs. If we were making every body by "hand" (which no one really does), costs would be absurdly high and consistancy would be very low. The average cost of a CNC machine (a computerized carving machine), with software, is about $125,000.00. Because that is beyond the means of most of us "smaller" guys, there are companies that own these machines who make parts for the "rest of us". Sadowsky, Lakland, Lull, Turner and lots more of us use various subcontractors. I know this takes some of the "romanticism" out of the process for you, but that is the way it is. Regarding our electronics---when you go through hundreds of circuits a year, you don't hand wire each one by hand. You design the circuit, make the prototype, and then you outsource it to a shop than just makes circuit boards! I had to make an important decision about 20 years ago. I could set up shop where I could do all the woodworking by myself. This would have meant locating where there are very few professional players. Instead, I chose to locate in the middle of Manhattan, where the top players could easily get to my shop. As long as I had good subcontractors I could depend on, I felt it more important to have the one-on-one and the indespensible feedback from the top players. This was also motivated by the fact that I still do a lot of repair and restoration work. I have never regretted this decision. It is hard to make a "working musician's" instrument if you don't have many working musicians to interact with. I build a Fender style instrument because that is what my clientele demands of me. 20 years ago, it was almost impossible to walk into a studio in NYC with anything other than a Fender. In fact the Union directory had two bass listings: Upright Bass and Fender Bass! All electric basses were referred to as Fender bass. There was a great deal of pressure on the bassists to only bring a Fender to a session. If I had a couple of million dollars, I could set up my own manufacturing facility outside of the city, but I can only be in one place at one time so it works just as well to use the subcontractors. Keep the following in mind: We purchase all of our wood directly. We hand build all of the "prototypes" that get sent to the subcontractor. We own all of the fixturing and programming. We continuously monitor the quality of our parts to be sure they are worthy of the Sadowsky name. The bodies come into our shop unsanded. We do all of the edge contouring, finish sanding and hand fit every neck pocket to get a perfect fit to out necks. Many of our bodies get additional routing and shaping done in our shop. The necks come in unsanded. We true each fingerboard one at a time, fret the necks, dress the frets, finish sand the necks, and spray the necks. On custom orders, we hand shape the neck too. Our assembly process is impeccable with regard to the quality of our components and workmanship. So I hope you can see that we definetly are a "hands-on" shop. I could not have achieved the reputation I have if I were simply buying a neck and body and "screwing them together". I think anyone who has had the opportunity to play a Sadowsky can appreciate the quality of the instrument. That doesn't mean they are for everyone---instrument choice is very subjective. What is nice is that all of us....Sadowsky, Lakland, Mike Tobias, Spector, Fodera, etc....all have lots of players that think we make the best instrument in the world! It's kind of perfect that way---don't you think? You don't have to disparage the other builders just because you prefer someone else's instruments. Lastly, many people speculate on this forum about issues related to Sadowsky without ever bothering to email me directly with their question. I am here and I am happy to answer all of your emails individually. Hope this clears things up for some of you. Sincerely, Roger Sadowsky[/quote] 1 Quote Link to comment Share on other sites More sharing options...
JTUK Posted May 26, 2009 Share Posted May 26, 2009 ^ yeah..and then they get too big and busy and then have to make the difficult choices... Once they get past 30-40 basses a year they have to sub out, IMV.... Quote Link to comment Share on other sites More sharing options...
harvey1-8 Posted May 26, 2009 Share Posted May 26, 2009 Can anyone tell me if the only place to get the Sadowsky preamp/DI pedal is direct from Sadowsky or is there a company in the UK that imports them? Quote Link to comment Share on other sites More sharing options...
OutToPlayJazz Posted May 26, 2009 Author Share Posted May 26, 2009 As far as I know they're direct from Sadowsky only. I've never seen anyone advertising them here, but by all means correct me if I'm wrong, people Quote Link to comment Share on other sites More sharing options...
PauBass Posted May 27, 2009 Share Posted May 27, 2009 [quote name='alexharvay' post='498351' date='May 26 2009, 10:18 PM']Can anyone tell me if the only place to get the Sadowsky preamp/DI pedal is direct from Sadowsky or is there a company in the UK that imports them?[/quote] The Gallery sell them, drop them a line and check if they've got it in stock: [url="http://www.thebassgallery.com/sadowypre.html"]http://www.thebassgallery.com/sadowypre.html[/url] Quote Link to comment Share on other sites More sharing options...
harvey1-8 Posted May 27, 2009 Share Posted May 27, 2009 How are you guys powering the pedal? The power adaptor Sadowsky sell, battery, diago power supply or other power bank type unit? Quote Link to comment Share on other sites More sharing options...
PauBass Posted May 27, 2009 Share Posted May 27, 2009 [quote name='alexharvay' post='498568' date='May 27 2009, 10:48 AM']How are you guys powering the pedal? The power adaptor Sadowsky sell, battery, diago power supply or other power bank type unit?[/quote] I have a Dunlop DC Brick on my board and it did the job really well. Quote Link to comment Share on other sites More sharing options...
Ray Posted June 12, 2009 Share Posted June 12, 2009 (edited) [quote name='Beedster' post='469367' date='Apr 22 2009, 10:31 AM']It's certainly a quality bass which retains a classic vintage quality whilst adding a little extra.[/quote] I'm seriously considering a Sadowsky Metro for this very reason. My only trouble is deciding between the RV4 in olympic white and the MV4 in natural. Hmmm Can anyone tell me if there's much difference in tone between the RV4 (alder body/rosewood board) and the MV4 (ash body/maple board) please? Cheers, Ray Edited June 12, 2009 by Ray Quote Link to comment Share on other sites More sharing options...
JTUK Posted June 15, 2009 Share Posted June 15, 2009 hhmmmm I've got my eye out for one... a MV5, I think.. but the only one I have come across wasn't anything to write home about in terms of feel and playability. The finish wasn't that great either. I'd want a thin neck on 1 7/8ths but since the above experience I wouldn't be wanting to buy from the U.S blind, for example, for an NYC.. Thankfully the £ rate still rules that out. Best to find one and try one..and then you'll know.. My tendency, ATM.. would be to get a jazz built to your own spec from a reknown UK luthier.. but I must admit, I have always wanted a Sadwosky... I'll keep an eye out here for a used sunburst MV 5... Quote Link to comment Share on other sites More sharing options...
Aussiephoenix Posted June 15, 2009 Share Posted June 15, 2009 [quote name='JTUK' post='514398' date='Jun 15 2009, 04:27 PM']but the only one I have come across wasn't anything to write home about in terms of feel and playability. The finish wasn't that great either.[/quote] Either you're a lot pickier than most, or that particular bass needed a good setup. Quote Link to comment Share on other sites More sharing options...
JTUK Posted June 15, 2009 Share Posted June 15, 2009 [quote name='Aussiephoenix' post='514467' date='Jun 15 2009, 04:50 PM']Either you're a lot pickier than most, or that particular bass needed a good setup. [/quote] It wasn't so much the set-up as I could and would have sorted that... it was the over-all finish....maybe it was a very old and modded one. They weren't that many at all about in the mid 90's AFAIK.. I am willing to accept that it wasn't or isn't the standard fare on the basses today... but I must get a closer look at one. A lot of the models on here photograph very well.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.