Jimothey Posted December 5, 2017 Share Posted December 5, 2017 (edited) This isn’t the build I planned on doing fist but I’m waiting on some veneer for the ‘51 P Bass so I thought it start on this instead Ive got a Ibanez GSR205 that I don’t particularly like so I thought I’d modify it into more of a Warwick Corvette-ish shape So I made my template (that ended up looking a bit like Frankenstein’s bride but it should work???) Made sure the template fitted ok Cut out the template then had a B******S!!!!!! moment I thought the bottom edge didn’t go over the edge of the cavity But it did!?! Filled the old holes and a few crappy bits round the outside (bloody bearing came off the router bit) and sanded the edge, so next job is sort out the edge of the cavity and start contouring the body.......... Edited August 23, 2018 by Jimothey Quote Link to comment Share on other sites More sharing options...
ezbass Posted December 5, 2017 Share Posted December 5, 2017 Colour me intrigued. I look forward to the progress of this. Quote Link to comment Share on other sites More sharing options...
Jimothey Posted December 5, 2017 Author Share Posted December 5, 2017 (edited) 17 minutes ago, ezbass said: Colour me intrigued. I look forward to the progress of this. I’m interested too on how’s this is going to turn out?? I’m kinda winging it at the mo!?! Edited December 5, 2017 by Jimothey Quote Link to comment Share on other sites More sharing options...
SpondonBassed Posted December 5, 2017 Share Posted December 5, 2017 Me too. Mind you, I was a bit jealous of you having an Ibby body to muck about with. I am keeping an eye out for Ibby SR bargains at the moment because I really like the shape of some of them. I'd have smoothed that body off to look like the others in the range. More sucked sweet than slab of cake if you get me. Have you plans for the neck? Quote Link to comment Share on other sites More sharing options...
Jimothey Posted December 5, 2017 Author Share Posted December 5, 2017 (edited) 2 hours ago, SpondonBassed said: Me too. Mind you, I was a bit jealous of you having an Ibby body to muck about with. I am keeping an eye out for Ibby SR bargains at the moment because I really like the shape of some of them. I'd have smoothed that body off to look like the others in the range. More sucked sweet than slab of cake if you get me. Have you plans for the neck? I’m probably just going to dye the fingerboard black and just colour match the headstock to the body and I’m thinking maybe a custom pickguard but I haven’t decided yet?? I bought it a couple of years ago (£45) and never got round to doing anything with it the electrics are shot except for the pickups so I’m just going to re-wire it, I like some of the more expensive SR’s but this is just from the gio range so its cheapest of the cheap so that’s why I thought I’d have a go at modding it?! I really like the shape of the corvette and I can’t afford a real Warwick so I thought this build will be just a bit of fun?!, I’m not going to spend a lot of money on it Edited December 5, 2017 by Jimothey Quote Link to comment Share on other sites More sharing options...
SpondonBassed Posted December 5, 2017 Share Posted December 5, 2017 They can't do you for it so I'm right behind you in principle. Quote Link to comment Share on other sites More sharing options...
Jimothey Posted December 5, 2017 Author Share Posted December 5, 2017 15 minutes ago, SpondonBassed said: They can't do you for it so I'm right behind you in principle. It’s probably not going to look anything like a Corvette when it’s done anyway it was just the general shape I’m after Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted December 6, 2017 Share Posted December 6, 2017 Watching with great interest, @Jimothey We all have those scary 'Oh c**p' moments, by the way. I've learned to force myself to turn a body round and always look at what's on the other side purely on the basis of the number of times I've routed into fresh air when I was expecting to be cutting wood chips! 1 Quote Link to comment Share on other sites More sharing options...
Jimothey Posted December 6, 2017 Author Share Posted December 6, 2017 44 minutes ago, Andyjr1515 said: Watching with great interest, @Jimothey We all have those scary 'Oh c**p' moments, by the way. I've learned to force myself to turn a body round and always look at what's on the other side purely on the basis of the number of times I've routed into fresh air when I was expecting to be cutting wood chips! That’s what I did I even put the template on the bottom and it looked like I would have had 5mm to spare but I must have put it a bit further up on the top doh!!!! Not too much of an issue tho, I’ve got to rout out the cavity bigger anyway to allow for the pots to move over I don’t know if I’m going to veneer this one as funds are a bit tight (the cam belt snapped on Mrs Jimotheys car £££££!!!!) but I have seen some Red Ebony that has taken my fancy?? Quote Link to comment Share on other sites More sharing options...
Jimothey Posted December 11, 2017 Author Share Posted December 11, 2017 Hi Does anyone know where I can get a copy of a Hipshot D style 2 piece bridge as funds are a bit low and can’t really afford the Hipshot price tag? Quote Link to comment Share on other sites More sharing options...
Jimothey Posted December 18, 2017 Author Share Posted December 18, 2017 Still not much more progress I’m hoping to do a bit more this week..... Ive got a bit of a dilemma tho the top horn isn’t as long as I hoped it would be so I want to cut a bit more out But that would mean the neck pocket will be shortened from 100mm down to 65mm Which I think is a bit short and won’t really give a lot of support??? I was maybe thinking about leaving the full length of the neck pocket but still cutting the contour longer Or will that just leave the end of the neck pocket too weak??? If anyone’s got any ideas on the best way forward please let me know Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted December 18, 2017 Share Posted December 18, 2017 Go for the second option. You need the length of pocket to spread load from the upward pull. The pocket wood itself will be strong enough without the wood from the cutaway being there (think bottom horn of a stratocaster - it's just the same) Quote Link to comment Share on other sites More sharing options...
Jimothey Posted December 18, 2017 Author Share Posted December 18, 2017 Cheers Andy I thought it would be ok the second way but just wanted to check Quote Link to comment Share on other sites More sharing options...
Jimothey Posted December 18, 2017 Author Share Posted December 18, 2017 I managed to get s few bits done today, I’ve rounded off the body and extended the length of the top horn and routed the cavity out It’s all sanded down ready to paint, I can’t decide whether to do it Black or White???? Quote Link to comment Share on other sites More sharing options...
ezbass Posted December 18, 2017 Share Posted December 18, 2017 This is going to be good, I can feel it. I like the shape of the lower bout and the reinforcing you've done there. Colour? I think I'd go with white. Quote Link to comment Share on other sites More sharing options...
Jimothey Posted December 18, 2017 Author Share Posted December 18, 2017 3 minutes ago, ezbass said: This is going to be good, I can feel it. I like the shape of the lower bout and the reinforcing you've done there. Colour? I think I'd go with white. Thanks it’s definitely coming out better than I first thought it would, It will kinda look corvette-ish but also a little bit different, I had some black paint so I thought I’d give it a spray but I’m now thinking it should go white Quote Link to comment Share on other sites More sharing options...
ezbass Posted December 18, 2017 Share Posted December 18, 2017 4 minutes ago, Jimothey said: I had some black paint so I thought I’d give it a spray but I’m now thinking it should go white I think it'll be easier to get a visually nicer finish in white. Plus, you don't see too many white Corvettes (or Corvette-alikes). Quote Link to comment Share on other sites More sharing options...
Jimothey Posted December 18, 2017 Author Share Posted December 18, 2017 2 minutes ago, ezbass said: I think it'll be easier to get a visually nicer finish in white. Plus, you don't see too many white Corvettes (or Corvette-alikes). I’ll get some white in a couple of days and give it a spray Quote Link to comment Share on other sites More sharing options...
Jimothey Posted December 18, 2017 Author Share Posted December 18, 2017 Just a quick mock up of the pickguard (Not to everyone’s tastes but I like it) Quote Link to comment Share on other sites More sharing options...
Jimothey Posted December 18, 2017 Author Share Posted December 18, 2017 (edited) I found some White so gave it a quick undercoat spray definitely looks better Next decision colour matched headstock or leave Maple????? Edited December 18, 2017 by Jimothey Quote Link to comment Share on other sites More sharing options...
ezbass Posted December 18, 2017 Share Posted December 18, 2017 Nice. Match if you can I reckon. Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted December 18, 2017 Share Posted December 18, 2017 1 hour ago, Jimothey said: I found some White so gave it a quick undercoat spray definitely looks better Next decision colour matched headstock or leave Maple????? Lovely job And matching headstock, I also reckon Quote Link to comment Share on other sites More sharing options...
Jimothey Posted December 18, 2017 Author Share Posted December 18, 2017 That’s just white primer on at the mo, it still needs a few more coats and flattening but I’ve gotta get some more white top coat (I prefer using cellulose) then clear coat it, I’m too impatient to use nitro Quote Link to comment Share on other sites More sharing options...
Jimothey Posted December 19, 2017 Author Share Posted December 19, 2017 (edited) It’s getting there!?! I don’t think it’s looking too bad?? Ive scrapped the pickguard idea it didn’t look right Hopefully I’ll finish painting it in the next couple of weeks then I just need to get a new bone nut to replace the crappy plastic one and decide where the controls are going? Edited December 19, 2017 by Jimothey Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted December 19, 2017 Share Posted December 19, 2017 I think that looks GREAT! Well done Quote Link to comment Share on other sites More sharing options...
.jpg.7e18f76540598a8efc0e6ca9be453059.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.