la bam Posted December 19, 2017 Share Posted December 19, 2017 Hi all, This may be a weird/paranoid question....but.... Ive just got an Ashdown little giant 1000. (Very impressed by the way so far). However it doesnt come in a sleeve, case or with any feet. Rubber feet are great for stopping the amp scratching my cab and allowing the unit to keep cool as the bottom of the amp can get warm if pushed. So, the daft question is - is it ok to glue the rubber feet to the bottom of the amp case? Theres no screw holes in the amp so that rules that out, just checking the glue wouldnt get hot etc? Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted December 19, 2017 Share Posted December 19, 2017 Yeah, I did the same with an Aguilar Tonehammer, the stock feet weren`t getting enough clearance over the handle on my cab, so glued some bigger ones on, no issues. Quote Link to comment Share on other sites More sharing options...
Dan Dare Posted December 19, 2017 Share Posted December 19, 2017 You can get rubber feet that have sticky pads ready attached. Just peel the backing paper and stick 'em on. If you search for 'self adhesive rubber feet' on eBay, you'll find stacks of them. Quote Link to comment Share on other sites More sharing options...
la bam Posted December 19, 2017 Author Share Posted December 19, 2017 Cheers. I'll try glueing these on them (save me a trip to b and q) and see how it goes. If not i'll get some with adhesive pads on. Thanks. Quote Link to comment Share on other sites More sharing options...
fleabag Posted December 21, 2017 Share Posted December 21, 2017 The other option is buy double sided sticky tape. You can use regular rubber feet then, if finding self stick rubbers are hard to come by Quote Link to comment Share on other sites More sharing options...
bazzbass Posted December 27, 2017 Share Posted December 27, 2017 I found a pack of different sized self adhesive clear rubber feet for things like dvd players etc. The medium sized square ones make perfect thumbrests. I have three of them on my pbass in the three main spots I use, near the neck, over the first pup, between the two pups. They are clear so don't show. Had em on for over a year,and we get 44 degree summers here and they haven't budged. non residue if you do remove them, I tested them. Quote Link to comment Share on other sites More sharing options...
rumblejunkie Posted January 3, 2018 Share Posted January 3, 2018 You may find that a dod of clear silicone will work much better than glue . It wont be effected by heat and if you decide to sell the amp later they will peel off better . Quote Link to comment Share on other sites More sharing options...
T-Bay Posted January 3, 2018 Share Posted January 3, 2018 Gorilla glue works well, the proper stuff not the wood one (that’s just PVA). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.