Hazza590 Posted February 7, 2018 Author Share Posted February 7, 2018 (edited) 9 hours ago, Grangur said: I was just thinking I and some others might have some bits hanging about we can contribute. I've probably got knobs and might have a bridge. What I do have is all the tools for leveling and crowning the frets. I'm down the road in Bishops Stortford. So if you and Dad fancy a drive over, when the time's right, I can help you out with a go with my tools. That will save you needing to buy them. Thanks I’ll probably do that @Grangur what colour what colour do you reckon the bridge and knobs would be? Edited February 7, 2018 by Hazza590 Quote Link to comment Share on other sites More sharing options...
HazzasDad Posted February 7, 2018 Share Posted February 7, 2018 Gents thanks again for the advice and the offers......More than generous!! We aren’t trying to get something for nothing!! Although it would obviously help Harry spread his money a bit further so thanks. what I would say is if you have something you want to sell.... then you and Harry can sort out whether he wants it and value.... if you have something you’d like to donate or to help him out (and he wants it) - I will make a donation to a charity of your choice and cover P&P Hopefully that way everyone gets something out of it..! Quote Link to comment Share on other sites More sharing options...
Norris Posted February 7, 2018 Share Posted February 7, 2018 I'll just add to the advice of @Jabba_the_gut by saying that when routing the neck pocket you can remove a lot of the material with a brad point drill bit first. That will save a lot of wear and tear on your router bit. Then go steady with the router, shaving a mm or two in each pass - helps reduce the risk of tear-out. I'm sure you don't need reminding to be really careful with the router - they are vicious machines that want to carve fingers! Quote Link to comment Share on other sites More sharing options...
Grangur Posted February 7, 2018 Share Posted February 7, 2018 (edited) 9 hours ago, Hazza590 said: Thanks I’ll probably do that @Grangur what colour what colour do you reckon the bridge and knobs would be? I have 2 chrome knobs. They're push on ones. I know they fit the small pots I have here. "Bent Bit of Tin" Chrome bridge. Its in virtually "as new" condition. I'm happy to put them in the post to you. Don't post your address here. If you want them, PM me. Edited February 7, 2018 by Grangur Quote Link to comment Share on other sites More sharing options...
Hazza590 Posted February 7, 2018 Author Share Posted February 7, 2018 14 minutes ago, Grangur said: I have 2 chrome knobs. They're push on ones. I know they fit the small pots I have here. "Bent Bit of Tin" Chrome bridge. Its in virtually "as new" condition. I'm happy to put them in the post to you. Don't post your address here. If you want them, PM me. Thanks that sounds great I’ll pm you the details Quote Link to comment Share on other sites More sharing options...
rOB Posted February 7, 2018 Share Posted February 7, 2018 Good luck Hazza! Be sure to keep us updated on how you get on. Quote Link to comment Share on other sites More sharing options...
Grangur Posted February 7, 2018 Share Posted February 7, 2018 You can't beat having new screws to put the bass together. Somewhere that's really good for buying screws and other parts is WD Music. http://www.wdmusic.co.uk/hardware-parts-c1 They also sell some really good necks. Not the cheapest, but they are good and no import duty to be paid on your purchase either. 1 Quote Link to comment Share on other sites More sharing options...
LukeFRC Posted February 7, 2018 Share Posted February 7, 2018 1 hour ago, Grangur said: You can't beat having new screws to put the bass together. Somewhere that's really good for buying screws and other parts is WD Music. http://www.wdmusic.co.uk/hardware-parts-c1 They also sell some really good necks. Not the cheapest, but they are good and no import duty to be paid on your purchase either. This. You can buy parts pretty cheap on eBay - esp if you don't mind a wait for them to come over from china! BUT throw away the screws and buy new good ones. Thats my one bit of advice. Quote Link to comment Share on other sites More sharing options...
Hazza590 Posted February 9, 2018 Author Share Posted February 9, 2018 I’ve just bought a second hand maple neck with tuners, string tree and neck plate included Quote Link to comment Share on other sites More sharing options...
Hazza590 Posted February 9, 2018 Author Share Posted February 9, 2018 Does anyone have a jag that they could draw around so I have a template for the body Quote Link to comment Share on other sites More sharing options...
SubsonicSimpleton Posted February 9, 2018 Share Posted February 9, 2018 There is a PDF that you caould presumably print out and use as a template here https://docs.google.com/viewer?a=v&pid=sites&srcid=ZGVmYXVsdGRvbWFpbnxndWl0YXJwbGFuc2NvbGxlY3Rpb258Z3g6NDc1YjQzZjJjMDlkZDFjNg A print shop should be able to print out 1:1 on single sheets, but some printers will print out multiple sheets of A4 that you can cut/paste together. Quote Link to comment Share on other sites More sharing options...
Jimothey Posted February 10, 2018 Share Posted February 10, 2018 If anyone is interested I’ve got some full size plans (PDF) Dimension IV Bass, Jazz Bass, And some guitar plans Jaguar, Strat, a few different Teles and some Gibson’s PM me if you want any of them and I’ll email them over to you Quote Link to comment Share on other sites More sharing options...
Hazza590 Posted February 14, 2018 Author Share Posted February 14, 2018 The pickups have arrived Quote Link to comment Share on other sites More sharing options...
Balrog68 Posted February 14, 2018 Share Posted February 14, 2018 I quite often use these guys for bits and pieces when building. https://www.blackdogmusic.co.uk Decent quality, very helpful and quick delivery. Quote Link to comment Share on other sites More sharing options...
Jimothey Posted February 14, 2018 Share Posted February 14, 2018 3 hours ago, Hazza590 said: The pickups have arrived Nice!!! Quote Link to comment Share on other sites More sharing options...
Oopsdabassist Posted February 14, 2018 Share Posted February 14, 2018 Indeed..an excellent choice! Good Luck fella!! Quote Link to comment Share on other sites More sharing options...
Hazza590 Posted February 14, 2018 Author Share Posted February 14, 2018 There’s a great website that sell custom bass guitar bodies for not a lot of money called guitarbuild.co.uk I’ve just ordered a body and it should be here in a couple of weeks Quote Link to comment Share on other sites More sharing options...
Pea Turgh Posted February 15, 2018 Share Posted February 15, 2018 11 hours ago, Hazza590 said: There’s a great website that sell custom bass guitar bodies for not a lot of money called guitarbuild.co.uk I’ve just ordered a body and it should be here in a couple of weeks Was it a special order? I couldn’t see a bass jaguar body there. Quote Link to comment Share on other sites More sharing options...
Hazza590 Posted February 17, 2018 Author Share Posted February 17, 2018 On 15/02/2018 at 09:54, Pea Turgh said: Was it a special order? I couldn’t see a bass jaguar body there. I decided to go for a walnut pj body and ditch the whole jaguar idea as all the parts for a jaguar were far more expensive than a normal pj bass 1 Quote Link to comment Share on other sites More sharing options...
Pea Turgh Posted February 17, 2018 Share Posted February 17, 2018 Ooh, walnut - nice! Quote Link to comment Share on other sites More sharing options...
Trueno Posted February 17, 2018 Share Posted February 17, 2018 Hazza... great stuff you're doing there. I think I was still playing with my action man when I was your age ??? if you get the chance, let us know how you get on with the Geezer pickups... they seem like a great addition to the short scale Squier Jag I've just bought. Of course I don't need them, but you've given me GAS... or should that be PAS. Quote Link to comment Share on other sites More sharing options...
Jimothey Posted February 17, 2018 Share Posted February 17, 2018 4 hours ago, Hazza590 said: I decided to go for a walnut pj body and ditch the whole jaguar idea as all the parts for a jaguar were far more expensive than a normal pj bass 3 hours ago, Pea Turgh said: Ooh, walnut - nice! I agree what finish you thinking? Quote Link to comment Share on other sites More sharing options...
Hazza590 Posted February 17, 2018 Author Share Posted February 17, 2018 A high gloss oil probably 1 Quote Link to comment Share on other sites More sharing options...
Jimothey Posted February 17, 2018 Share Posted February 17, 2018 25 minutes ago, Hazza590 said: A high gloss oil probably Good choice sounds very nice!! Quote Link to comment Share on other sites More sharing options...
BrunoBass Posted April 11, 2018 Share Posted April 11, 2018 How’s the build coming along @Hazza590 ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.