Bastav Posted February 15, 2018 Posted February 15, 2018 Thought I'd share a project I've been working on as part of the winter build off challenge over at that other bass forum. The challenge was to use mainly walnut. I looked at the pile I had handy and decided to build something inspired by the wingbass concept (basically a headless 34'' bass cut off at the 12th fret). So here we go. First of, wood pile and design More puzzle pics 2 Quote
Bastav Posted February 15, 2018 Author Posted February 15, 2018 After a lot of glueing (wings not attached to the neck yet) Clamping shot! (wouldn't be a build thread without at least one) Quote
Bastav Posted February 15, 2018 Author Posted February 15, 2018 Here it is with the veneers in place and just about ready to glue it up 1 Quote
Bastav Posted February 15, 2018 Author Posted February 15, 2018 Here's the china bridge to be used I took it apart cause I wasn't crazy about the overlord of music-logo. Decided to raplace that with a bit of wood to match the fretboard. with a bit o sanding and now you're pretty much caught up 1 Quote
scojack Posted February 15, 2018 Posted February 15, 2018 Nice one Bastav ! Been on my TODO list for years, looking good Quote
Jabba_the_gut Posted February 15, 2018 Posted February 15, 2018 That’s really nice walnut. I’ve got one of those bridges knocking around - this has give me ideas!! Quote
TheGreek Posted February 15, 2018 Posted February 15, 2018 When you finish it and have got bored with it...let me know... Quote
Andyjr1515 Posted February 15, 2018 Posted February 15, 2018 Excellent. I love the lines - and that walnut is just beautiful Quote
Bastav Posted February 15, 2018 Author Posted February 15, 2018 Thanks all! Today was glue up day. One wing... ... two wing... ... one piece! Quote
Bastav Posted February 15, 2018 Author Posted February 15, 2018 Also, here's the sidedots. The idea, to have the dots halfway visable, didn't work as well as I had thought so I added dots for frets 3, 5, 7 and 12. It works and doesn't look too bad but if I was to do it again I would try something else. Quote
Bastav Posted February 22, 2018 Author Posted February 22, 2018 On 2018-02-15 at 23:13, Pea Turgh said: Lovely! Thanks! Quote
Bastav Posted February 22, 2018 Author Posted February 22, 2018 Finalized the shape and did some shaping of the heel. Also cut some knobs and made a pickup cover but I made a small router boo-boo. Will need to cover that up. Quote
RichardH Posted February 22, 2018 Posted February 22, 2018 How do you fix the knobs to the pots? Do you just rely on pushing them on to the spline, or have you managed to source some inserts? Quote
Bastav Posted February 22, 2018 Author Posted February 22, 2018 4 hours ago, RichardH said: How do you fix the knobs to the pots? Do you just rely on pushing them on to the spline, or have you managed to source some inserts? I'm just going to drill for a set screw to keep it in place. 1 Quote
Andyjr1515 Posted February 22, 2018 Posted February 22, 2018 Love the light demarcation stripes, @Bastav. Very classy. Quote
TheGreek Posted February 22, 2018 Posted February 22, 2018 Can't wait to see the grain come to life when it receives a polish.. Quote
Bastav Posted February 22, 2018 Author Posted February 22, 2018 4 hours ago, Andyjr1515 said: Love the light demarcation stripes, @Bastav. Very classy. Thanks, I was expecting them to look more red actually, maybe after finishing :) Quote
Bastav Posted February 22, 2018 Author Posted February 22, 2018 52 minutes ago, TheGreek said: Can't wait to see the grain come to life when it receives a polish.. You and me both Quote
SpondonBassed Posted February 23, 2018 Posted February 23, 2018 I've never seen one of these before so not only am I blown away by the craftsmanship, I am intrigued by the Wingbass idea itself. Not too much different to a uBass, I suppose? Quote
TheGreek Posted February 23, 2018 Posted February 23, 2018 Check the last SE Bass Bash for photos of Ped's. Very impressive little thing... Quote
Bastav Posted February 23, 2018 Author Posted February 23, 2018 1 hour ago, SpondonBassed said: I've never seen one of these before so not only am I blown away by the craftsmanship, I am intrigued by the Wingbass idea itself. Not too much different to a uBass, I suppose? Here's a photo of my Ubass next to this thing. The wing is also tuned one octave above the ubass (which is tuned like a regular bass). 1 Quote
Bastav Posted February 23, 2018 Author Posted February 23, 2018 And I think it's time for a mockup with (almost) all the bits in place. Quote
.jpg.518c69c2d9e1581799f3c11301dc2da5.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.