Kevin Dean Posted April 13, 2018 Posted April 13, 2018 Can you suggest a a/b pedal to connect two basses to the same amp & switch between the two I would need level control for each . Quote
dannybuoy Posted April 13, 2018 Posted April 13, 2018 (edited) Radial Bigshot I/O GigRigThree2One Palmer AB-I The Gigrig is the only one with two level controls (well three actually), but in reality you probably only need to attenuate the louder bass down to the level of the other one or vice versa so one level control may suffice! Is the smallest and supports 3 instruments, but is also the most expensive. The Palmer only has multi stage pad switches rather than a volume knob so isn't as adjustable, but it is the cheapest. Edited April 13, 2018 by dannybuoy 1 Quote
CameronJ Posted April 13, 2018 Posted April 13, 2018 Someone like Bright Onion could custom build you a switcher with level controls/indicator LEDs etc in a compact enclosure for relatively little money. I have one: That said, the GigRig Three2One looks glorious! 2 Quote
Jus Lukin Posted April 13, 2018 Posted April 13, 2018 (edited) - Edited February 25, 2022 by Jus Lukin 1 Quote
Kevin Dean Posted April 13, 2018 Author Posted April 13, 2018 I like the look of the Radial Bigshot I/O V1 as it's passive . Quote
Ceebass Posted April 13, 2018 Posted April 13, 2018 1 hour ago, Jus Lukin said: The Boss LS-2 will do it, and with many more options too! I've used mine for this too. They go for cheap 2nd hand! 1 Quote
TheGreek Posted April 16, 2018 Posted April 16, 2018 (edited) Micro mixer?? I have a couple of these - ideal for when using a drum machine, etc. Edited April 16, 2018 by TheGreek 1 Quote
EliasMooseblaster Posted April 16, 2018 Posted April 16, 2018 I've been using a Pitchblack+ for a few years now: http://www.korg.com/us/products/tuners/pitchblack_plus/index.php Granted, it's about twice the size of a regular pitchblack, but having your A/B and tuner combined in the same pedal is really quite convenient! (Plus it has an option to daisy chain power out to other pedals - I only use an overdrive and a fuzz on stage, so it's more than adequate for these purposes.) 2 Quote
Mudpup Posted April 16, 2018 Posted April 16, 2018 9 hours ago, EliasMooseblaster said: I've been using a Pitchblack+ for a few years now: http://www.korg.com/us/products/tuners/pitchblack_plus/index.php Granted, it's about twice the size of a regular pitchblack, but having your A/B and tuner combined in the same pedal is really quite convenient! (Plus it has an option to daisy chain power out to other pedals - I only use an overdrive and a fuzz on stage, so it's more than adequate for these purposes.) But can you adjust the output levels individually? 1 Quote
Radchenko Posted April 17, 2018 Posted April 17, 2018 Radial bassbone overdrive. 2 basses and overdrive. 1 Quote
EliasMooseblaster Posted April 17, 2018 Posted April 17, 2018 15 hours ago, Mudpup said: But can you adjust the output levels individually? Not from the pedal, no. I tend to use the volume on the guitars for that! Quote
Kevin Dean Posted April 18, 2018 Author Posted April 18, 2018 I've gone for the Radial Bigshot , off of ebay for £29 . I like the fact it doesn't need a battery . 1 Quote
mart3442 Posted May 1, 2018 Posted May 1, 2018 Radial bigshot I/o version 2. Input 2 has buffered variable level settings, mutable tuner output, led's to show which channel is selected, and if you have the tuner mute engaged. The signal goes to the tuner, regardless if the mute is engaged or not. Its an active box, requiring a power supply, but will also run passively. 1 Quote
E sharp Posted May 11, 2018 Posted May 11, 2018 On 13/04/2018 at 06:19, dannybuoy said: GigRigThree2One This looks quality . I'm thinking of going Pre-amp pedal into power amp for my rig . So is there any reason why this couldn't mix 3 Pre-amps if needed ? ie - Sansamp BDDI , Sansamp Q strip , and say another . Quote
dannybuoy Posted May 11, 2018 Posted May 11, 2018 2 minutes ago, E sharp said: This looks quality . I'm thinking of going Pre-amp pedal into power amp for my rig . So is there any reason why this couldn't mix 3 Pre-amps if needed ? ie - Sansamp BDDI , Sansamp Q strip , and say another . You could switch between them, but you wouldn't be able to mix them! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.