eubassix Posted April 18, 2018 Share Posted April 18, 2018 (edited) bass currently plays active but the whole centre-rod pulls out rather than switching). Neck is Fender J type - fits well. Vol + Pan + B/T stacked. 8.8lbs. 34" scale; 1.5" nut; 10/19mm spacing/s (nut/bridge). There's a chunk out of the body (below knobs/edge) which has been re-coloured *& coated. New 40-100 - Nickels. Action OK but hard to get ultra-low, 'F' logo Edited March 26, 2019 by eubassix error Link to comment Share on other sites More sharing options...
BrunoBass Posted June 8, 2018 Share Posted June 8, 2018 Where are you located please? Link to comment Share on other sites More sharing options...
eubassix Posted June 8, 2018 Author Share Posted June 8, 2018 Location: Teesside (N.E.) Link to comment Share on other sites More sharing options...
BrunoBass Posted June 8, 2018 Share Posted June 8, 2018 Ok thanks Link to comment Share on other sites More sharing options...
eubassix Posted June 8, 2018 Author Share Posted June 8, 2018 2 hours ago, BrunoBass said: Ok thanks ... if you're interested, I could include the Courier so long as you're OK for me to send 'split' (safer in some ways): just need a Philips for the neck (plate/screws) and then re-attach the strings. The replacement pot (push/pull) could also be done first/easier before re-attaching the neck etc. Link to comment Share on other sites More sharing options...
BrunoBass Posted June 8, 2018 Share Posted June 8, 2018 Thanks will PM you later if ok? Link to comment Share on other sites More sharing options...
BrunoBass Posted June 11, 2018 Share Posted June 11, 2018 Nice bass, have a bump 😊 Link to comment Share on other sites More sharing options...
Recommended Posts