Jack Posted May 7, 2018 Share Posted May 7, 2018 Hi all. I've been trying to source some replacement screws for my gator racks, but it seems they're not a standard size. The normal m6 rack screws that I have for my other case didn't fit. The size is 10/32 x 3/4" according to the internet, does anyone have a good source for these in the UK? Ideally with washers? It's £30 for a Gator branded set. Thanks Jack Quote Link to comment Share on other sites More sharing options...
hubrad Posted May 7, 2018 Share Posted May 7, 2018 (edited) You need a specialist nuts and bolts supplier; most towns in regions where engineering is or was an industry have one still. You can usually take them a sample bolt and they'll identify it and sell you more. Generally that's a few pence per bolt, and you can often have a selection of heads. Isn't most Gator stuff made in the Far East? That usually means metric threads (tried M5?) unless they are really trying to protect their after sales. Edited May 7, 2018 by hubrad Quote Link to comment Share on other sites More sharing options...
hubrad Posted May 7, 2018 Share Posted May 7, 2018 I just looked at my Gator rack case.. deffo smaller than M6, so 1st port of call I'd try M5. Go to your local hardware shop with the case, ask to try a couple of sizes, and use the magic words 'If it fits, I'll buy a dozen'! :-D Quote Link to comment Share on other sites More sharing options...
Matt P Posted May 8, 2018 Share Posted May 8, 2018 In the north east i'd suggest getting in touch with these guys http://www.masfix.co.uk/ they're the most likely to have the correct fasteners (they were the default supplier of fasteners at my old job in an engineering company) they're not too far from you either. Matt (the happy new owner of your old Zoom ms-60B) Quote Link to comment Share on other sites More sharing options...
Jack Posted May 8, 2018 Author Share Posted May 8, 2018 2 hours ago, Matt P said: In the north east i'd suggest getting in touch with these guys http://www.masfix.co.uk/ they're the most likely to have the correct fasteners (they were the default supplier of fasteners at my old job in an engineering company) they're not too far from you either. Matt (the happy new owner of your old Zoom ms-60B) I'm not likely to forget you twice. Well, actually... Thanks for the recommendations all, I hadn't thought about just taking the screws somewhere. Seems blinkin' obvious when I have to type it out! Jack Quote Link to comment Share on other sites More sharing options...
intime-nick Posted May 16, 2018 Share Posted May 16, 2018 I've used stainless steel M5x0.8, 20 long button head socket screws in all my Gator racks for years. The thread size and profile is almost identical to 10-32 UNC especially over the short thread depth of the gator threaded rails and they are a lot easier to get hold of in the UK. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.