Jump to content
Why become a member? ×

Amplifier Isolation platform DIY?


Thunderbird

Recommended Posts

Hi guys I am thinking about making an isolation pad a bit like the Auralex gramma pads (which are out of my price range) as my cab really vibrates my floorboards no matter how low I have the volume I have put a couple of acoustic tiles under the cab and they help a bit but I am looking for a better solution that is makeable any ideas or advice chaps? :)

Link to comment
Share on other sites

I use a piece of plywood with four Sorbothane Hemispheres as feet.  You'll need to pick a size/Durometer rating that suits your situation - these are the specific ones I use for my amp + 2 cabs stack which weighs about 34Kg: https://www.amazon.co.uk/gp/product/B003IMODW8/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

I use them to reduce the vibration being transmitted through a wooden floor/stage and they work really well - cured the problem I had of the drummers snare wires rattling on a couple of songs where I play the intro on bass.  The material is quite sticky, so I've covered mine in clingfilm to stop all the crud from the floor sticking to them.  Edit: If you mean the floorboards in your house then the stickiness might not be an issue, as I assume your floors are cleaner than those in the places I play gigs!

 

Edited by Gottastopbuyinggear
Link to comment
Share on other sites

Take a look on youtube for the videos about DIY drum isolation platforms - basic low tech solution that uses tennis balls sandwiched between two boards. Take the idea and then scale down, and maybe substitue the tennis balls with something a bit softer (squash balls, foam dog balls) - a lot depends on how heavy your amp is.

Link to comment
Share on other sites

4 hours ago, Jus Lukin said:

'Scuse the mess, but here are a couple of shots of one I made. A little over engineered perhaps, but it does seem effective. It's a sandwich consisting of yoga mat, 18mm MDF, 20mm rubber mat sold for washing machine isolation, 18mm MDF, yoga mat, and stood on 20mm hard rubber feet attached with T-nuts. It's heavy for what it is! I also have a slightly smaller one with a thick block of stiff foam in place of the rubber mat which appears just as effective, but doesn't take so much weight.

I do have a Gramma Pad too. I've not used it in anger yet as unlike mine with the solid, wipe clean feet, it just places the unprotected foam straight onto a filthy stage (or beer, chips, and dogshit encrusted carpet in a pub). I'm still deciding whether to add another layer to the Gramma, or perhaps carry a splinter/muck-proof mat to place under it. By comparison to mine it is very light, but also seems quite resonant, strangely.

IMG_20180514_130758.thumb.jpg.caa4c4dc4535ac076ba4d2da89516c30.jpg

IMG_20180514_130808.thumb.jpg.84f8221b239a0bfad993cbd9af01421b.jpg

That looks great I see a project coming on thanks

Link to comment
Share on other sites

2 hours ago, SubsonicSimpleton said:

Take a look on youtube for the videos about DIY drum isolation platforms - basic low tech solution that uses tennis balls sandwiched between two boards. Take the idea and then scale down, and maybe substitue the tennis balls with something a bit softer (squash balls, foam dog balls) - a lot depends on how heavy your amp is.

Great thanks 

Link to comment
Share on other sites

I made mine from 3/4” mdf with a carpet tile on the top and dense packing foam on the bottom. It does make quite a difference when we play anywhere that has a stage or wooden floor.

Link to comment
Share on other sites

An alternative approach is 2 MDF boards, with a partially pumped up bicycle inner tube folded up between them. You can tidy it up with a bit of edging around the bottom one to hide the tube as long as the top board fits inside without touching it.

  • Like 1
Link to comment
Share on other sites

Thought I'd chime back in with a photo of my solution:

IMG_0493.thumb.jpg.2cd5b1329c22df2bf53cbfef8faa192c.jpg

It's a bit "Class D" compared to some - it certainly doesn't have any heft! 

Took about half an hour to make with a left over bit of 6mm ply and a mini circular saw.  The feet are self-adhesive.  Weighs next to nothing, and the hole in the middle means I can carry it on top of one of my cabs.  Total cost about £20.  And if I'm feeling particularly juvenile I can tell people I have Sorbothane balls!

Edited by Gottastopbuyinggear
  • Like 1
  • Haha 1
Link to comment
Share on other sites

  • 1 year later...

Hi.... DIY is the lowest cost option by far, and depending on how handy you are, and how much effort you want to put into it you can come up with a very attractive and effective stand with minimal cost. I made some using butcher blocks from TJ Max ($20 each for the block). Depending on what kind of footer you put on it they'll cost less than $30 each, and probably no more assembly time than $100+ stands. You can use other material for the platform too, such as a simple MDF, granite, etc.

medical pcb assembly

Edited by AlliPlatt
Link to comment
Share on other sites

my bass room has bare floorboards , so I made one quite easily for my markbass 15s, from 2 layers of dense foam, then a layer of white rock plastic on top to give it a firm base , and then a carpet tile top ,all glued together with spray adhesive, it works very well , and cheap 🙂

D279ABD7-0B9D-49ED-952C-8D546D33695F.jpeg

Link to comment
Share on other sites

Whatever you do make sure it's stable with the rig in place on it. I stopped using my Gramma Pad after watching a video of the band playing at the venue where it was most needed and being horrified to see that my rig was swaying all over the place in response to any other movement on stage. When we next played and I didn't use it there was a slight extra roominess to the bass sound, but I could live with that in exchange for not having to worry that my rig could topple over at any minute.

Link to comment
Share on other sites

  • 3 years later...
On 14/05/2018 at 12:31, MrDaveTheBass said:

Late to the party here, but I really like this idea. Portable, small and should get the job done. I’d be tempted to enhance the pucks with maybe a little Velcro or some other kind of temporary fixing to ensure the amp doesn’t manage to bounce itself off - a bouncy stage and a pogoing bassist could do that… 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...