seymour duncan trouble

[christhammer666]

morning All

 

I placed a

SD3 quarter pounder in my precision infinity yesterday and they really were a tight squeeze through the pickguard. Now when I adjust the screws there are no movement in the pickups which means they are quite low and have hardly any output. is there an easy way to rectify this without paying a luthier to mess with the pickguard.

thanks all

[gary mac]

I think some gentle filing around the opening in the guard is what you need to be doing. If you've managed to get the pick ups in there but they just a little tight, it should only need a small amount removed.

[ezbass]

3 minutes ago, gary mac said:

I think some gentle filing around the opening in the guard is what you need to be doing. If you've managed to get the pick ups in there but they just a little tight, it should only need a small amount removed.

+1 I often have to 'ease' pick guards when I've new P/ups. Two sided nail files (coarse and fine) work well, aren't too aggressive and leave a good finish.