Markbass

[jdt]

Hi,could I use a 2x10 4ohms with an 2x10 8ohms with lms3,thanks

[M@23]

Nope. Need to swap that 4ohm cab for another 8ohm if you want to use two together. 

[jdt]

Thank you

[prowla]

Well, you could use them, but one would get more power than the other.

[Dood]

1 hour ago, prowla said:

Well, you could use them, but one would get more power than the other.

At a total load impedance of 1.6 ohms I wouldn’t recommend it with these kinda amps

[King Tut]

I've found Markbass heads to be pretty flaky if you go even a little bit below 4 ohms. 

[la bam]

I have a markbass 6x10.

That was made to be 6ohms.

Which is a great compromise. Plenty of power and no risk with ohmage.

[HazBeen]

1 hour ago, dood said:

At a total load impedance of 1.6 ohms I wouldn’t recommend it with these kinda amps

2.6 and the cosmic balance is restored

[Sparky Mark]

12 hours ago, prowla said:

Well, you could use them, but one would get more power than the other.

Well, you could if you wanted to destroy your LM3. Otherwise do what the Markbass website instructs and only go down to a 4 ohm load by using one 4 ohm cabinet or two 8ohm cabinets. 

[prowla]

Maybe get another head for the 2nd cab.