paul_5 Posted June 25, 2018 Share Posted June 25, 2018 Has anyone ever had to buy one of these to ground the bridge on their Jazz bass? Looking to fit one to a bass but unsure where to get them? Basically it’s just a bent bit of copper, no? Quote Link to comment Share on other sites More sharing options...
Geek99 Posted June 25, 2018 Share Posted June 25, 2018 It’s just a simple piece of copper sheet held in place by the bridge and touching the earth pole of the bridge pickup. You could even use simple shielding foil 1 Quote Link to comment Share on other sites More sharing options...
BassBod Posted June 25, 2018 Share Posted June 25, 2018 I’ve used thin brass sheet, cut to run under the bridge pickup, then wired to ground on one of the pots. Quote Link to comment Share on other sites More sharing options...
Thunderbird Posted July 1, 2018 Share Posted July 1, 2018 I think kiogan sells them could be worth asking Quote Link to comment Share on other sites More sharing options...
gjones Posted July 1, 2018 Share Posted July 1, 2018 When my original one got a bit manky, I bought a thin sheet of copper from Ebay and cut a thin strip from that with a pair of scissors. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.