Beedster Posted July 7, 2018 Share Posted July 7, 2018 (edited) I've amassed a rather large collection of parts that I've built in and out of various basses over the years, some I've sold, some I've given away to various causes, some I've kept, but I find myself with far too many bits and far too little cash right now so am getting rid of a lot of necks, bodies and hardware. This has been hanging around a while, neck is Fender dimensions albeit a little deeper, will need a shim for standard Fender neck. Screw holes also not standard Fender. Lovely aged grain with some nice flaming here and there. Edited July 23, 2018 by Beedster 1 Link to comment Share on other sites More sharing options...
Johnny Wishbone Posted July 16, 2018 Share Posted July 16, 2018 Hi mate. Any idea of the shim thickness that would be required? Link to comment Share on other sites More sharing options...
Beedster Posted July 16, 2018 Author Share Posted July 16, 2018 Hi Johnny, it'll depend on the width of the neck, I'd say 3-5mms if a standard Fender. Cheers Chris 1 Link to comment Share on other sites More sharing options...
Johnny Wishbone Posted July 16, 2018 Share Posted July 16, 2018 Cheers, I'll see if it's still around come payday. Link to comment Share on other sites More sharing options...
oldslapper Posted July 22, 2018 Share Posted July 22, 2018 Hi Chris, are you prepared to post this? I'd stick an unlined fretless neck I have on it & have natural body P twins. Thanks, John Link to comment Share on other sites More sharing options...
Beedster Posted July 22, 2018 Author Share Posted July 22, 2018 2 hours ago, oldslapper said: Hi Chris, are you prepared to post this? I'd stick an unlined fretless neck I have on it & have natural body P twins. Thanks, John Hello mate, very happy to post Cheers Chris Link to comment Share on other sites More sharing options...
oldslapper Posted July 22, 2018 Share Posted July 22, 2018 Just pm'd. Cheers. Link to comment Share on other sites More sharing options...
Beedster Posted July 23, 2018 Author Share Posted July 23, 2018 SOLD Link to comment Share on other sites More sharing options...
Recommended Posts