Adam555 Posted September 22, 2018 Share Posted September 22, 2018 I bought an Ibanez SR505 Left-handed from PMT in August 2018 Played it a couple of times sitting down with no issues until I stood up to play. As I moved around I felt something 'nocking' inside the bass cavity, which also came though the amp. I opened it up and noticed that one screw has slightly split wood and some of the electrics move around a bit, which I think is the main cause of the 'nocking' sound. My question is.. Is this something I could fix my self, would it be something I should contact PMT for them to look at it or is it a non-issue. The bass plays fine and sound great, I'm just worried as its a really special bass and I wouldn't want to ruin it. Thanks for any suggestions. Quote Link to comment Share on other sites More sharing options...
itsmedunc Posted September 22, 2018 Share Posted September 22, 2018 Send it back. Don't take any risks, These things don't happen really. 1 Quote Link to comment Share on other sites More sharing options...
SpondonBassed Posted September 22, 2018 Share Posted September 22, 2018 (edited) Welcome to the forum Adam. Do not attempt to repair it until PMT have made an assessment. If they say it is not their responsibility you have the choice of accepting what they say and taking the hit for repairs costs or seeking redress via consumer rights. You'd have no solid ground from which to present your case otherwise. For what it is, I'd remain optimistic that PMT will deal appropriately with it. PS; I agree. It's a great bass to take you further with your playing. I have the SR605 which is broadly similar. Given that these instruments are made really well, your issue should not present a challenge to the vendor to fix at their own cost. Edited September 22, 2018 by SpondonBassed 1 Quote Link to comment Share on other sites More sharing options...
Adam555 Posted September 22, 2018 Author Share Posted September 22, 2018 Thank you for replying, I plan to contact PMT and taking things from there, Hopefully its a quick and easy fix. Quote Link to comment Share on other sites More sharing options...
NJE Posted September 22, 2018 Share Posted September 22, 2018 From what I can see that is a quick fix with some wood glue and on you go, however....that isn’t the point, if this was a new bass then the problem shouldn’t be there and I would either be asking for a replacement or at least some sort of refund to compensate for the damage and to get it fixed. Im Sure they would be happier letting you hold on to it and giving money off than having to do it all themselves. 2 Quote Link to comment Share on other sites More sharing options...
Adam555 Posted September 22, 2018 Author Share Posted September 22, 2018 I agree that it looks like a simple fix - but as it is a new bass im not risking it lol (I'm no master luthier) It was a limited edition Bubina/Jatoba Bass and its lefty so getting a replacement maybe tricky. All I'd like from them is a quick fix... Fingers crossed P.s Contact them via email so waiting for a response but will take it to the store next weekend just to be proactive 2 Quote Link to comment Share on other sites More sharing options...
SpondonBassed Posted September 23, 2018 Share Posted September 23, 2018 6 hours ago, Adam555 said: proactive I sometimes confuse that word with "prolapse". I hope you are well in either case. 2 Quote Link to comment Share on other sites More sharing options...
Ed_S Posted September 23, 2018 Share Posted September 23, 2018 With an issue like that, for me personally it all depends on how nice the rest of the instrument is. I've done the 'right-is-right' thing and sent instruments back to be swapped out or repaired in cases of minor defects, only to get back either an exchange that has issues of its own or just doesn't look/feel/play/sound as nice as the one I had, or a repair that I could have done better myself and has sometimes even caused additional damage. If that bass were mine, there was nothing else wrong with it and I liked it to the point of describing it as 'really special', I'd just glue the wood, secure the preamp PCB and get on with enjoying my bass. Just another opinion, of course. 5 Quote Link to comment Share on other sites More sharing options...
SpondonBassed Posted September 23, 2018 Share Posted September 23, 2018 1 hour ago, Ed_S said: If that bass were mine, there was nothing else wrong with it and I liked it to the point of describing it as 'really special', I'd just glue the wood, secure the preamp PCB and get on with enjoying my bass. Just another opinion, of course. I'm usually the same. I have good manual skills though. 1 Quote Link to comment Share on other sites More sharing options...
Guest Posted September 23, 2018 Share Posted September 23, 2018 It does make me laugh that manufacturers don’t use inserts for screws on control cavities. They cost peanuts, only ever need to be fitted once and prevent any wood splitting in future. That circuit board would normally be glued or cable-tied down, and as it looks like it’s all plug-in with no direct soldering, it should be very easy to fix. A dab of glue in the split wood and some inserts would fix the screw hole issue permanently. Quote Link to comment Share on other sites More sharing options...
Adam555 Posted September 23, 2018 Author Share Posted September 23, 2018 2 hours ago, Ed_S said: If that bass were mine, there was nothing else wrong with it and I liked it to the point of describing it as 'really special', I'd just glue the wood, secure the preamp PCB and get on with enjoying my bass. Just out of curiosity when you say ''secure the preamp PCB'' How would you go about doing that exactly? Would be a matter of cable tying the PCB to the other cables? I described it as 'special' because it's so fun and easy to play and it's a 30th birthday gift from my partner :) It now has sentimental value. Quote Link to comment Share on other sites More sharing options...
discreet Posted September 23, 2018 Share Posted September 23, 2018 All good advice, but being impatient, I'd go with NJE and Ed_S - negotiate for a partial refund while fixing the screw hole with glue and sticking the PCB to a blob of Blu-Tack. But that's just me. And them. Quote Link to comment Share on other sites More sharing options...
Ed_S Posted September 23, 2018 Share Posted September 23, 2018 1 hour ago, Adam555 said: Just out of curiosity when you say ''secure the preamp PCB'' How would you go about doing that exactly? Would be a matter of cable tying the PCB to the other cables? I described it as 'special' because it's so fun and easy to play and it's a 30th birthday gift from my partner It now has sentimental value. I’d probably just use a bit of soft open-cell packing foam to stop the board from moving around in the control cavity. Cable ties and blu-tack are other options, but soft foam would just fill the gap between the components and the cavity cover and stop anything from going anywhere with no risk that it’d become detached again, because it was never attached in the first place - just held in place. Hopefully you can get it all sorted out without any drama and get back to enjoying playing it. 2 Quote Link to comment Share on other sites More sharing options...
mcnach Posted September 23, 2018 Share Posted September 23, 2018 13 hours ago, Ed_S said: With an issue like that, for me personally it all depends on how nice the rest of the instrument is. I've done the 'right-is-right' thing and sent instruments back to be swapped out or repaired in cases of minor defects, only to get back either an exchange that has issues of its own or just doesn't look/feel/play/sound as nice as the one I had, or a repair that I could have done better myself and has sometimes even caused additional damage. If that bass were mine, there was nothing else wrong with it and I liked it to the point of describing it as 'really special', I'd just glue the wood, secure the preamp PCB and get on with enjoying my bass. Just another opinion, of course. same here. It's such a trivial repair, I would not want to play lottery with what bass I'd receive next (unless I were able to go in person to the store and check their stock, which is not possible here, I take it) Quote Link to comment Share on other sites More sharing options...
mcnach Posted September 23, 2018 Share Posted September 23, 2018 7 hours ago, Ed_S said: I’d probably just use a bit of soft open-cell packing foam to stop the board from moving around in the control cavity. Cable ties and blu-tack are other options, but soft foam would just fill the gap between the components and the cavity cover and stop anything from going anywhere with no risk that it’d become detached again, because it was never attached in the first place - just held in place. Hopefully you can get it all sorted out without any drama and get back to enjoying playing it. +1 on the foam. Simple, no residue. 1 Quote Link to comment Share on other sites More sharing options...
Adam555 Posted October 3, 2018 Author Share Posted October 3, 2018 Just an update for anyone interested. Had the Ibanez back from PMT and all the issues seem fixed. They filled the split wood, made a new screw hole and glued the preamp pcb down, it sounds fine now - issue fixed They even ordered in a replacement just incase anything else goes wrong. Thanks everyone for messaging. 2 Quote Link to comment Share on other sites More sharing options...
SpondonBassed Posted October 3, 2018 Share Posted October 3, 2018 Good outcome. Thanks for the update. It's always nicer when you hear of good service. It's important to mention it because people never forget to mention bad service. 1 Quote Link to comment Share on other sites More sharing options...
jacko Posted October 3, 2018 Share Posted October 3, 2018 On 23/09/2018 at 12:15, FDC484950 said: It does make me laugh that manufacturers don’t use inserts for screws on control cavities. Alembic do. Just as well as they don't have a quick release battery compartment - you have to go into the control cavity every time you need to change the battery Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.