fleabag Posted October 9, 2018 Posted October 9, 2018 Leccy wizards , i have a problem. On this passive bass, it's just a tone, vol, and blend. But the blend works backwards, at least for my tastes. When rotating the blend towards the neck pup ( clockwise ) i get the bridge pup, and vice versa for the neck pup ( anti-clockwise ) I need to reverse this action, but there's too many wires on the blend to make it obvious for me which one's i need to change over. I took a photo of the back of the blend pot, though i find these harder to de-cypher, so i have also cobbled a pencil diag. together so it's easier to see everything. Y = yellow ( there's 3 in all ) B = black ( 2 of ) R = Red ( 1 of ) V = Vol T = Tone PS - B1 and Y3 cross over diagonally but are not joined together Quote
ikay Posted October 9, 2018 Posted October 9, 2018 Just swap the red and yellow wires to the middle lugs over 1 Quote
KiOgon Posted October 9, 2018 Posted October 9, 2018 2 minutes ago, ikay said: Just swap the red and yellow wires to the middle lugs over Yep - wot e sed 😊 1 Quote
fleabag Posted October 9, 2018 Author Posted October 9, 2018 Ooooh lovely - thanks chappies Just to confirm, swap over R1 with Y2 ?? Quote
fleabag Posted October 9, 2018 Author Posted October 9, 2018 No need to confirm - it worked ! Thanks peeps. Very quick response Quote
KiOgon Posted October 9, 2018 Posted October 9, 2018 1 hour ago, fleabag said: Ooooh lovely - thanks chappies Just to confirm, swap over R1 with Y2 ?? Correctamundo! Quote
Chienmortbb Posted October 25, 2018 Posted October 25, 2018 Not the finest soldering I have seen. Quote
fleabag Posted October 25, 2018 Author Posted October 25, 2018 Indeed. Looks like i did it, but not guilty. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.