planethead Posted December 1, 2008 Share Posted December 1, 2008 Anyone with experience using NC lacquer from either Tonetech or the Manchester Guitar Tech. Is it the same stuff and does one spray better than t'other etc. ttfn Quote Link to comment Share on other sites More sharing options...
neepheid Posted December 1, 2008 Share Posted December 1, 2008 I cannot compare, but I can vouch for the quality of MGT's nitro cans - dare I say it - does exactly what it says on the tin. Goes on easy and I was pleased with the finish I achieved. Quote Link to comment Share on other sites More sharing options...
planethead Posted December 1, 2008 Author Share Posted December 1, 2008 [quote name='neepheid' post='341920' date='Dec 1 2008, 02:07 PM']I cannot compare, but I can vouch for the quality of MGT's nitro cans - dare I say it - does exactly what it says on the tin. Goes on easy and I was pleased with the finish I achieved.[/quote] Excellent I was leaning towards his stuff except he doesn't appear to offer a satin - I suppose I could go gloss then tone it down. with a paste. ttfn BTW found an interesting discussion on Zebrano the other day (you're in that part of the woods I think) - if I can find it again I'll edit this post with a link. Quote Link to comment Share on other sites More sharing options...
neepheid Posted December 1, 2008 Share Posted December 1, 2008 [quote name='planethead' post='341932' date='Dec 1 2008, 02:26 PM']Excellent I was leaning towards his stuff except he doesn't appear to offer a satin - I suppose I could go gloss then tone it down. with a paste. ttfn BTW found an interesting discussion on Zebrano the other day (you're in that part of the woods I think) - if I can find it again I'll edit this post with a link.[/quote] Well, if it's about how the interlocking grain makes it a pain to work both with hand and power tools and the fact that it stinks when you cut it then I know [i]all[/i] about it Quote Link to comment Share on other sites More sharing options...
planethead Posted December 1, 2008 Author Share Posted December 1, 2008 [quote name='neepheid' post='341945' date='Dec 1 2008, 02:39 PM']Well, if it's about how the interlocking grain makes it a pain to work both with hand and power tools and the fact that it stinks when you cut it then I know [i]all[/i] about it [/quote] a line from "The Zebranos" perhaps? let us never speak of it again... :-) Quote Link to comment Share on other sites More sharing options...
neepheid Posted December 1, 2008 Share Posted December 1, 2008 [quote name='planethead' post='341962' date='Dec 1 2008, 03:18 PM']a line from "The Zebranos" perhaps? let us never speak of it again... :-)[/quote] I would still be interested to read the discussion you mentioned, if you can dig the link out Quote Link to comment Share on other sites More sharing options...
planethead Posted December 1, 2008 Author Share Posted December 1, 2008 [quote name='neepheid' post='341964' date='Dec 1 2008, 03:23 PM']I would still be interested to read the discussion you mentioned, if you can dig the link out [/quote] Found it re-read it - faulty memory (please read avatar for probable cause ;-), but there's a nice picture by way of compensation [url="http://www.mimf.com/cgi-bin/[email protected]@.2cb68ac6"]here[/url] ttfn Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.