Woodinblack Posted July 18, 2019 Share Posted July 18, 2019 Updated the HX Effects without problems, need to do native. Quote Link to comment Share on other sites More sharing options...
mr zed Posted July 19, 2019 Share Posted July 19, 2019 Updated HX edit successfully however when trying to update the firmware on the stomp it goes through the start up mode then sticks saying firmware 2.71. Doesn't matter what I do, it sticks at this point. Getting really fed up with it now! Grrrrrrr……..! Quote Link to comment Share on other sites More sharing options...
Woodinblack Posted July 19, 2019 Share Posted July 19, 2019 Is that when you run the Line6 software updater or after you have tried to update it? Quote Link to comment Share on other sites More sharing options...
la bam Posted July 19, 2019 Share Posted July 19, 2019 Theres a very strict procedure to follow when updating apparently. You have to follow it word for word. And make sure you back up first, or you could lose all your presets. 2 Quote Link to comment Share on other sites More sharing options...
Al Krow Posted July 19, 2019 Author Share Posted July 19, 2019 15 minutes ago, la bam said: Theres a very strict procedure to follow when updating apparently. You have to follow it word for word. And make sure you back up first, or you could lose all your presets. Maybe I was lucky then Installed the updater (otherwise you can't go from 2.71 to 2.8). Didn't bother backing anything up, but there again tbf I've not anything much that wouldn't take 20 mins to pull together. 2.8 uploaded and no presets affected at all: all the stock patches I'd deleted were still deleted and all the presets I'd created were also all still there. Quote Link to comment Share on other sites More sharing options...
Woodinblack Posted July 19, 2019 Share Posted July 19, 2019 My HX effects had no presets after the upgrade Quote Link to comment Share on other sites More sharing options...
mr zed Posted July 19, 2019 Share Posted July 19, 2019 2 hours ago, Woodinblack said: Is that when you run the Line6 software updater or after you have tried to update it? I backed up my presets on 2.71. I then downloaded 2.8 edit. I plugged in the stomp and launched the updater. The stomp showed up in the software. I followed the links to 2.8 firmware and clicked continue. It started the update process then an error message appeared on the screen. Since then when I switch the stomp on the red line reaches the end of its start up on the stomp screen and won't move on from there. Doesn't matter if it's plugged in to the computer or not. Very frustrating. Quote Link to comment Share on other sites More sharing options...
fretmeister Posted July 19, 2019 Share Posted July 19, 2019 The release notes are here. FOLLOW IT EXACTLY! https://line6.com/support/page/kb/effects-controllers/helix/helixhx-280-release-notes-r913/ Quote Link to comment Share on other sites More sharing options...
fretmeister Posted July 19, 2019 Share Posted July 19, 2019 The SVT4 Pro model is very good indeed. The Ampeg Scrambler and the Sansamp are just like they are in real life - absolute shite. Remarkably accurate! 8 Quote Link to comment Share on other sites More sharing options...
CameronJ Posted July 19, 2019 Share Posted July 19, 2019 It’s worth noting that there are a load of new 2.8 presets (including some bass-specific ones) which, unless you follow the procedure for rebuilding the preset list, won’t show up after the update. By default, you’ll still have the default 2.7 preset list (minus your own user presets) until you perform the preset rebuild procedure. Quote Link to comment Share on other sites More sharing options...
fretmeister Posted July 19, 2019 Share Posted July 19, 2019 I ignored the new presets. I might have a look at some point but generally the first thing I do is clear them out anyway. Quote Link to comment Share on other sites More sharing options...
Al Krow Posted July 19, 2019 Author Share Posted July 19, 2019 8 minutes ago, fretmeister said: I ignored the new presets. I might have a look at some point but generally the first thing I do is clear them out anyway. +1 ^^ I suspect most of the patches I'm going to be using in a band mix will be created ones; that's part of the fun for me anyway. But looking forward to finding out what new effects are now available. But I guess it's a completely different ball game if you are going FRFR. Quote Link to comment Share on other sites More sharing options...
Woodinblack Posted July 19, 2019 Share Posted July 19, 2019 36 minutes ago, mr zed said: It started the update process then an error message appeared on the screen. What was the error? Quote Link to comment Share on other sites More sharing options...
Rollin Thunder Posted July 19, 2019 Share Posted July 19, 2019 Like the scrambler, more bass specific effects is only a good thing, but i really like the Heir Apperent works great on bass, on its own or into a amp sim. Quote Link to comment Share on other sites More sharing options...
Muppet Posted July 19, 2019 Share Posted July 19, 2019 Anyone got a list of the new presets? To be fair I never use them but I still like to try them out. I did the restore to reload in the presets but I can't work out for the life of me which ones are new - the lists look exactly the same...... Quote Link to comment Share on other sites More sharing options...
fretmeister Posted July 19, 2019 Share Posted July 19, 2019 28 minutes ago, Woodinblack said: What was the error? The patch notes say the error message is expected 1 Quote Link to comment Share on other sites More sharing options...
tonyclaret Posted July 20, 2019 Share Posted July 20, 2019 Anyone tried the moogerfooger yet? Quote Link to comment Share on other sites More sharing options...
Al Krow Posted July 20, 2019 Author Share Posted July 20, 2019 On 19/07/2019 at 20:06, mr zed said: I backed up my presets on 2.71. I then downloaded 2.8 edit. I plugged in the stomp and launched the updater. The stomp showed up in the software. I followed the links to 2.8 firmware and clicked continue. It started the update process then an error message appeared on the screen. Since then when I switch the stomp on the red line reaches the end of its start up on the stomp screen and won't move on from there. Doesn't matter if it's plugged in to the computer or not. Very frustrating. You managed to find a workaround? I note the manual is still showing as 'for use with firmware 2.65' so hasn't been updated for 2.71 or 2.80 yet. Been having a clear out of some of the HX presets today - but one of the 2.71 direct amp & cab sims - the Hiwatt 100 ('WhoWatt100') guitar valve amp with a massive 4x12 cab sounded great and is definitely not getting culled. Dunno if anyone else is a fan of this one and will be using? Apparently Pete Townsend and Dave Gilmour were big into Hiwatt, so it's clearly got quite a guitar pedigree but, must admit, I'd never really considered pairing a guitar valve amp with bass before - wonder whether it works as well in real life as it does on a HX simulation?! Quote Link to comment Share on other sites More sharing options...
Muppet Posted July 21, 2019 Share Posted July 21, 2019 The Moogerfooger is good fun but there are so many parameters you can change that it's going to take a while to get used to. Now, that SVT 4 Pro..... I just gigged it tonight. It's absolutely awesome. 2 Quote Link to comment Share on other sites More sharing options...
Cato Posted July 21, 2019 Share Posted July 21, 2019 (edited) The new ZeroAmp Bass DI (Sansamp clone) is hands down the nicest sounding, most usable drive/distortion effect I've ever used on a bass. Makes me want to try a real Sansamp. Edited July 21, 2019 by Cato Quote Link to comment Share on other sites More sharing options...
Al Krow Posted July 21, 2019 Author Share Posted July 21, 2019 Ok that's several things to check out then! SVT 4 Pro, Moogerfooger, ZeroAmp BDI 1 hour ago, Cato said: The new ZeroAmp Bass DI (Sansamp clone) is hands down the nicest sounding, most usable drive/distortion effect I've ever used on a bass. Makes me want to try a real Sansamp. You've clearly not read the script have you?! The Stomp is supposed to save you money on pedals, not cost you extra! 😂 2 1 Quote Link to comment Share on other sites More sharing options...
Cato Posted July 21, 2019 Share Posted July 21, 2019 (edited) 2 hours ago, Al Krow said: Ok that's several things to check out then! SVT 4 Pro, Moogerfooger, ZeroAmp BDI You've clearly not read the script have you?! The Stomp is supposed to save you money on pedals, not cost you extra! 😂 I think it may have have been a bit of a gateway drug for me. Since playing about with the Stomp reverbs on guitar, I've been having thoughts about a Strymon Blue Sky as well. I'm probably going to end up getting some sort of dedicated bass synth pedal too. Then maybe a really good envelope filter. And possibly a board to put them all on.... Edited July 21, 2019 by Cato Quote Link to comment Share on other sites More sharing options...
Al Krow Posted July 21, 2019 Author Share Posted July 21, 2019 7 minutes ago, Cato said: I think it may have have been a bit of a gateway drug for me. Since playing about with the Stomp reverbs on guitar, I've been having thoughts about a Strymon Blue Sky as well. I'm probably going to end up getting some sort of dedicated bass synth pedal too. Then maybe a really good envelope filter. And probably a board to put them all on.... Oh dear, dear, dear....and then you're going to want to get it all midi capable and maybe wireless would be nice? Maybe I should save you a LOT of trouble and just sell you mine? 😂 1 Quote Link to comment Share on other sites More sharing options...
Cato Posted July 21, 2019 Share Posted July 21, 2019 3 hours ago, Al Krow said: Oh dear, dear, dear....and then you're going to want to get it all midi capable and maybe wireless would be nice? Maybe I should save you a LOT of trouble and just sell you mine? 😂 Looking at that reminds me how relatively easy the Helix is to set up. 2 Quote Link to comment Share on other sites More sharing options...
Al Krow Posted July 21, 2019 Author Share Posted July 21, 2019 7 minutes ago, Cato said: Looking at that reminds me how relatively easy the Helix is to set up. Exactly! Sounds like we have managed to get back onto the 'Plan' then 😂 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.