funkle Posted November 30 Share Posted November 30 That’s a very cool find. I’m going to try a play with those settings. 1 Quote Link to comment Share on other sites More sharing options...
tauzero Posted December 1 Share Posted December 1 Just asked for Pino Palladino fretless sound from Paul Young's records. I shall have a play with the settings it's provided and see how it turns out. 2 Quote Link to comment Share on other sites More sharing options...
Gank Bass Posted December 5 Share Posted December 5 Apologies if this has already been asked! But in preset mode, is there a way to get the footswitch icons to display the name of the preset and not the code? Quote Link to comment Share on other sites More sharing options...
Wombat Posted December 8 Share Posted December 8 On 05/12/2024 at 12:40, Gank Bass said: Apologies if this has already been asked! But in preset mode, is there a way to get the footswitch icons to display the name of the preset and not the code? I’m sure by default it shows the preset number above the name? If not possibly one of the Global footswitch settIngs has been changed? It’s explained in the Helix manual. Page 12 in the 3.80 version. Quote Link to comment Share on other sites More sharing options...
Gank Bass Posted December 8 Share Posted December 8 1 hour ago, Wombat said: I’m sure by default it shows the preset number above the name? If not possibly one of the Global footswitch settIngs has been changed? It’s explained in the Helix manual. Page 12 in the 3.80 version. I'll take a look, thank you! Bought the unit second hand from what I'm assuming was a pink Floyd tribute as every preset slow was a Floyd song, quite impressive really! Quote Link to comment Share on other sites More sharing options...
Wombat Posted December 8 Share Posted December 8 Fine if you want Gilmore tones. Or Guy’s? Easy enough to change though. And plenty of help here if you need it. 1 Quote Link to comment Share on other sites More sharing options...
BassAgent Posted December 13 Share Posted December 13 I have a question about my Helix LT. I've just had a flight case built for my Helix LT. I want to put velcro on the bottom of the Helix to fix it to the case. Is it possible to remove the rubber feet without compromising the fixation of the bottom plate to the device? Quote Link to comment Share on other sites More sharing options...
Wombat Posted December 13 Share Posted December 13 If it’s in warranty I’d probably leave it as you could invalidate that. I had my helix open a couple of times when it was like 3 years old and as far as I recall the feet were not completely necessary. I think I’d find something thick enough to make up the gap. Quote Link to comment Share on other sites More sharing options...
BigRedX Posted December 16 Share Posted December 16 On 13/12/2024 at 16:51, BassAgent said: I have a question about my Helix LT. I've just had a flight case built for my Helix LT. I want to put velcro on the bottom of the Helix to fix it to the case. Is it possible to remove the rubber feet without compromising the fixation of the bottom plate to the device? Someone here 3D printing fixtures that replaced the feet and allowed the Helix the be screwed to the wooden base of a pedal board case. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.