zander71 Posted November 30, 2018 Share Posted November 30, 2018 (edited) For sale is a very high quality "Bitsa" jazz bass very much in the style of the 1974 AVRI. Parts are as follows - Allparts block and bound rosewood jazz bass neck with authentic decal applied and lacquered WD Music Vintage White 3 Piece American Alder body Lindy Frallin Jazz bass pickups Fender stamped 70s style tuners Fender slothead bass bridge Fender string tree Fender neckplate and screws Fender strap buttons Vintage pots and wiring Tort pickguard Comes in a vintage style tweed case and is currently strung with flatwounds. Quite light and weighs around 7 1/2lbs in weight Edited December 14, 2019 by zander71 3 Link to comment Share on other sites More sharing options...
Mickeyboro Posted December 1, 2018 Share Posted December 1, 2018 Beautiful... 1 Link to comment Share on other sites More sharing options...
AndyTravis Posted December 1, 2018 Share Posted December 1, 2018 Nicest looking bites I’ve seen in a while 1 Link to comment Share on other sites More sharing options...
zander71 Posted December 1, 2018 Author Share Posted December 1, 2018 Cheers guys. Needs must. Link to comment Share on other sites More sharing options...
stewblack Posted December 1, 2018 Share Posted December 1, 2018 Gorgeous! What a looker. Anyone considering this rest assured you can deal with Zander with absolute confidence. Great guy. Link to comment Share on other sites More sharing options...
Jezyorkshire Posted December 1, 2018 Share Posted December 1, 2018 Where are you man? Link to comment Share on other sites More sharing options...
zander71 Posted December 1, 2018 Author Share Posted December 1, 2018 44 minutes ago, Jezyorkshire said: Where are you man? Just outside Glasgow. Link to comment Share on other sites More sharing options...
Jezyorkshire Posted December 1, 2018 Share Posted December 1, 2018 2 hours ago, zander71 said: Just outside Glasgow. That’s a shame man, would have liked to have a look, good luck with sale man Link to comment Share on other sites More sharing options...
zander71 Posted December 2, 2018 Author Share Posted December 2, 2018 Cheers mate. Link to comment Share on other sites More sharing options...
Quatschmacher Posted December 2, 2018 Share Posted December 2, 2018 (edited) What radius and rear profile does the neck have? What type is the truss rod adjusting nut? Can it be adjusted without removing the neck? Could you please elaborate on what you mean by “vintage pots and wiring”. Edited December 2, 2018 by Quatschmacher Link to comment Share on other sites More sharing options...
zander71 Posted December 2, 2018 Author Share Posted December 2, 2018 Hi, not sure of the actual radius of the neck. It's probably more C type than modern. I have a Geddy Lee and it's deeper than that. Truss rod is adjusted at the body end of the neck and neck needs removed to adjust. The pickups have cloth wiring and the pots are solid shaft CTS. Thanks Link to comment Share on other sites More sharing options...
zander71 Posted December 2, 2018 Author Share Posted December 2, 2018 From the Allparts web-site. 20 frets (.103" x .045") Maple bass neck with white binding and vintage tinted finish Rosewood fingerboard with white pearloid block inlays 10" radius Nut width 1.5" Heel width 2-7/16" Tuning peg hole diameter 11/16" Truss Rod adjustment at heel Neck thickness .89" at first fret, 1.00" at twelfth fret Link to comment Share on other sites More sharing options...
.jpg.7e18f76540598a8efc0e6ca9be453059.jpg)
Recommended Posts