SICbass Posted June 25, 2019 Share Posted June 25, 2019 1 hour ago, GisserD said: anybody struggling with the FI editor, or synthesis in general might enjoy this. https://learningsynths.ableton.com/get-started its a fantastic primer for all things synth. I've just had a very brief look and it looks very useful. Thanks for posting. Link to comment Share on other sites More sharing options...
Quatschmacher Posted June 25, 2019 Author Share Posted June 25, 2019 10 minutes ago, owen said: What I like about the FI is that I have other people to struggle with that stuff for me who then just present patches which enable me to say "that is ace, I can use that" instead of "this pedal looked ace but I have owned it for 2 years and can still not make head nor tail of it". This is not being lazy. Too many parameters make my head all fuzzy. I can not even read piano music because there is too much going on. I think that’s a good approach. I love creating patches for this thing. The complexity of the interface does put some people off. I’m hoping that (and have suggested as much) that, after the new update is released, work gets focussed on making the patch transfer part of the editor much more user-friendly. That way, one needn’t feel overwhelmed by the options but will at least be able to audition, transfer and re-order patches effortlessly. Link to comment Share on other sites More sharing options...
Quatschmacher Posted June 25, 2019 Author Share Posted June 25, 2019 1 hour ago, GisserD said: anybody struggling with the FI editor, or synthesis in general might enjoy this. https://learningsynths.ableton.com/get-started its a fantastic primer for all things synth. That’s really a very good set of explanations. Having the visual tracking of the envelope is brilliant. The Waldorf Quantum and Moog One have this kind of visual representation on their screens and it’s really useful. Link to comment Share on other sites More sharing options...
Quatschmacher Posted June 27, 2019 Author Share Posted June 27, 2019 @AinsleyWalker, see the first post. 1 Link to comment Share on other sites More sharing options...
Al Krow Posted July 2, 2019 Share Posted July 2, 2019 @Quatschmacher do you reckon you could reproduce the synth bass at 0.00 to 0.13 and 1.01 to 1.28 on the FI ?! Link to comment Share on other sites More sharing options...
Al Krow Posted July 6, 2019 Share Posted July 6, 2019 (edited) My pedalboard recently developed an annoying whine. The cause turned out to be the Roland midi cable plugged into my FI which was picking up interference from my underboard PSU. Midi now unplugged and the whine is gone, so I'll just connect up the FI to my PC for downloading software updates and patches and leave disconnected at other times. Edited July 6, 2019 by Al Krow Link to comment Share on other sites More sharing options...
AinsleyWalker Posted July 9, 2019 Share Posted July 9, 2019 On 16/12/2018 at 15:11, Quatschmacher said: If you just want to replace one individual patch with another then first find a patch on the pedal that you want to overwrite. Then find the file on your PC of the patch you wish to write to the pedal. Rename this file so that it starts with the two-digit prefix of the slot into which you wish to load it. Open the renamed file again via the editor then click “write single file to pedal” and it will get loaded into that slot. If you want to load multiple files at once onto the pedal then it’s best to create a folder, copy in the PC files you want to load onto the pedal. Then rename each file with the slot numbers you want them to go, choose that folder via the editor then click “write all”. Any blanks will be skipped over and left untouched in the pedal. Is it possible to switch existing patches this way? For example I want the first 9 patches to be the ones I use most often, and there are one or two (such as 32 and 43) that I would like to swap in for 4 and 7. Can I simply change the file names (so change 04 to 32 and 07 to 43 and vice versa for both) as you suggest and then 'write all'? Or is this only for adding new patches? Link to comment Share on other sites More sharing options...
GisserD Posted July 9, 2019 Share Posted July 9, 2019 1 hour ago, AinsleyWalker said: Is it possible to switch existing patches this way? For example I want the first 9 patches to be the ones I use most often, and there are one or two (such as 32 and 43) that I would like to swap in for 4 and 7. Can I simply change the file names (so change 04 to 32 and 07 to 43 and vice versa for both) as you suggest and then 'write all'? Or is this only for adding new patches? yes, that is entirely possible. the factory presets are just preses like any other user created ones, and can be moved around at will. 1 Link to comment Share on other sites More sharing options...
Quatschmacher Posted July 9, 2019 Author Share Posted July 9, 2019 (edited) 6 hours ago, AinsleyWalker said: Is it possible to switch existing patches this way? For example I want the first 9 patches to be the ones I use most often, and there are one or two (such as 32 and 43) that I would like to swap in for 4 and 7. Can I simply change the file names (so change 04 to 32 and 07 to 43 and vice versa for both) as you suggest and then 'write all'? Or is this only for adding new patches? Yes. This can be done as you described. Edited July 9, 2019 by Quatschmacher 1 Link to comment Share on other sites More sharing options...
AinsleyWalker Posted July 23, 2019 Share Posted July 23, 2019 (edited) Is it normal for the Output knob to be really stiff to move? Mine has been much harder to move than the other two controls since I got it new. It works fine but just seems weird Edited July 23, 2019 by AinsleyWalker Link to comment Share on other sites More sharing options...
GisserD Posted July 23, 2019 Share Posted July 23, 2019 Do you have the o-ring mod installed? Link to comment Share on other sites More sharing options...
AinsleyWalker Posted July 24, 2019 Share Posted July 24, 2019 23 hours ago, GisserD said: Do you have the o-ring mod installed? Nope, no mods. Just owned it from new, nothing changed (except patch parameters) Link to comment Share on other sites More sharing options...
GisserD Posted July 24, 2019 Share Posted July 24, 2019 they started fitting the o'ring mod at the factory. just take a pot off (carefully) if there's o'rings underneath then its fitted. the rings are assembled with some dry lube to keep things moving, potentially none was installed of yours? if you take the knobs off are the pots themselves still tight? if yes there is a problem with the pot. *as an aside, are you in one of my 3D printed housings? if yes, PM me and i'll offer you some advice in what could be the cause. Link to comment Share on other sites More sharing options...
AinsleyWalker Posted July 25, 2019 Share Posted July 25, 2019 On 24/07/2019 at 11:49, GisserD said: they started fitting the o'ring mod at the factory. just take a pot off (carefully) if there's o'rings underneath then its fitted. the rings are assembled with some dry lube to keep things moving, potentially none was installed of yours? if you take the knobs off are the pots themselves still tight? if yes there is a problem with the pot. *as an aside, are you in one of my 3D printed housings? if yes, PM me and i'll offer you some advice in what could be the cause. Tbh I can't even remove the knobs, i'm pulling harder than I would need to with any other pedal I have and they aren't moving at all.. I think I might contact Panda and see what they say. Link to comment Share on other sites More sharing options...
AinsleyWalker Posted August 1, 2019 Share Posted August 1, 2019 I've got the Future Impact editor, however it always opens the window way too big, meaning I can't see a lot of the options on the bottom row. I'm unable to resize the window manually. Any idea what I can do to prevent this? Link to comment Share on other sites More sharing options...
Quatschmacher Posted August 1, 2019 Author Share Posted August 1, 2019 (edited) 42 minutes ago, AinsleyWalker said: I've got the Future Impact editor, however it always opens the window way too big, meaning I can't see a lot of the options on the bottom row. I'm unable to resize the window manually. Any idea what I can do to prevent this? Change monitor resolution or move the taskbar to the side. i have a two-monitor setup now which gets around this. Edited August 1, 2019 by Quatschmacher Link to comment Share on other sites More sharing options...
AinsleyWalker Posted August 6, 2019 Share Posted August 6, 2019 (edited) On 01/08/2019 at 10:02, Quatschmacher said: Change monitor resolution or move the taskbar to the side. i have a two-monitor setup now which gets around this. Thanks! Fixed this issue by doing exactly what you said for another issue, had forgot about the FI Editor issue ha! But now the FI Editor and the pedal itself aren't communicating.. There were no issues last week when I last tried hmm I'm changing my MIDI Preferences to use the Roland UM-ONE MIDI interface but when I apply my settings they don't save for some reason. Not sure why, the cable is being recognised by my PC, the drivers installed when I used it the first time and it's on COMP mode.. Any ideas? Edited August 6, 2019 by AinsleyWalker Link to comment Share on other sites More sharing options...
Quatschmacher Posted August 6, 2019 Author Share Posted August 6, 2019 (edited) 2 hours ago, AinsleyWalker said: Thanks! Fixed this issue by doing exactly what you said for another issue, had forgot about the FI Editor issue ha! But now the FI Editor and the pedal itself aren't communicating.. There were no issues last week when I last tried hmm I'm changing my MIDI Preferences to use the Roland UM-ONE MIDI interface but when I apply my settings they don't save for some reason. Not sure why, the cable is being recognised by my PC, the drivers installed when I used it the first time and it's on COMP mode.. Any ideas? Are you trying to write patches to the pedal or just send parameter changes. If the former, make sure both cables are hooked up and selected. If the latter, you only need the MIDI in to be connected. Or maybe your USB port has gone into a power-saving mode. Edited August 6, 2019 by Quatschmacher Link to comment Share on other sites More sharing options...
Quatschmacher Posted August 13, 2019 Author Share Posted August 13, 2019 After listening back to my FI patches I know the C4 can’t touch these sounds with its limited envelope control. I hope Source Audio take heed and put better envelope shaping options in in a future update. 1 Link to comment Share on other sites More sharing options...
GisserD Posted August 21, 2019 Share Posted August 21, 2019 On 07/06/2019 at 08:17, GisserD said: Peter that "Squanchy" patch is making my danglies tingle!! can you share that patch please? peter can you recreate squanchy for me on yhe C4? Link to comment Share on other sites More sharing options...
Quatschmacher Posted August 21, 2019 Author Share Posted August 21, 2019 1 hour ago, GisserD said: peter can you recreate squanchy for me on yhe C4? Not sure, it uses a feature of the FI that isn’t available on C4 - using the envelope follow to regulate the volume of an oscillator so that it drives the volume into foldover distortion. I might be able to get in the ballpark though using a dedicated drive. I’ll have a go. 1 Link to comment Share on other sites More sharing options...
AinsleyWalker Posted August 24, 2019 Share Posted August 24, 2019 Anyone got any patches that are like the bass synth tone in this: I made one the other day that is pretty close but, it just doesnt quite sit right in the mix. Hard to get the slow upwards swoop while retaining thick low end throughout Link to comment Share on other sites More sharing options...
Quatschmacher Posted September 1, 2019 Author Share Posted September 1, 2019 In the course of cleaning up the English in the manual, I came across a nugget of information that I’d overlooked: I always knew that if the sum of the “volume” sliders of two or more oscillators exceeded 127 then foldover distortion occurred. What I hadn’t realised was that a similar thing occurs within a single oscillator. That is to say, if the sum of the volumes of two (or all three) waveforms within a single oscillator exceeds 127 then foldover distortion also occurs. This is a big discovery for me and I am annoyed I overlooked it. It could lead to some pretty cool sounds. Likewise, it explains why I was getting unexpected results when adding a triangle wave in a single oscillator block where the saw was already at 127! While we are on the subject, I’d be interested to know if sections of the manual that users find unclear as it might help me to know which sections to expound upon. Currently I’m cleaning up the English and adding information I feel is lacking. Link to comment Share on other sites More sharing options...
Owen Posted September 1, 2019 Share Posted September 1, 2019 The SY-1 does sustain. Is there any way of persuading the FI to? Obv it will need an external doobrie. Link to comment Share on other sites More sharing options...
Quatschmacher Posted September 1, 2019 Author Share Posted September 1, 2019 (edited) On 01/09/2019 at 22:54, owen said: The SY-1 does sustain. Is there any way of persuading the FI to? Obv it will need an external doobrie. Not yet but is on the roadmap. @owen I had to amend this as I had mistakenly thought it was coming in the update. Edited September 18, 2019 by Quatschmacher Erroneous information Link to comment Share on other sites More sharing options...
Recommended Posts