WHUFC BASS Posted December 19, 2018 Share Posted December 19, 2018 (edited) I'm currently using D'Addario strings on my basses (and when I can afford them, DR Hi-Beams) but was wondering what Rotosound strings are like now? I haven't used them in years (read decades). I went from using them, to Ernie Ball Slinkys, to Bass Centre Elites and then onto D'Addario and DRs. As we approach leaving the EU I'd like to support a British firm and am contemplating using Rotosounds. Anyone use them regularly? Are they as inconsistent as they were back in the 80s? Do they still eat frets as everyone kept on telling me back then? Edited December 19, 2018 by WHUFC BASS 1 Quote Link to comment Share on other sites More sharing options...
Drax Posted December 19, 2018 Share Posted December 19, 2018 Have used both 45's (Nickel) and 66 (Steel) a lot, never had issues with consistency nor noticed them eating frets. Your preferred DR Hi-Beams are unique as they're Round core vs most other strings being Hex core (just DR and GHS making round wound / round core?). Personally I find this makes a massive difference to playability, much more malleable, esp in the lower register - and for me, more comfortable and more dynamic. Everyone is different though and guess all comes down to personal taste. Quote Link to comment Share on other sites More sharing options...
Paul S Posted December 19, 2018 Share Posted December 19, 2018 A cheap way to try is to buy the Legacy brand sold by Strings Direct. They are re-badged Rotosounds but nearly half the price 2 Quote Link to comment Share on other sites More sharing options...
BigRedX Posted December 19, 2018 Share Posted December 19, 2018 If you want to support a British firm making strings have a look at Newtone. 4 Quote Link to comment Share on other sites More sharing options...
Hobbayne Posted December 19, 2018 Share Posted December 19, 2018 I have recently started using Rotosound RB50's. They are quite a heavy gauge, and so far so good from me. I had been using Ernie Ball for years and fancied a change. Quote Link to comment Share on other sites More sharing options...
Steve Browning Posted December 19, 2018 Share Posted December 19, 2018 (edited) I use Rotosound Jazz and the Nickel Swing Bass strings and am perfectly happy with their feel and tone. They are always consistent and I have never had any issue with them over the many years I have been using them. I guess I should come clean that I am a Rotosound endorsee but that does not influence my opinion. I was using them before I got my deal. Edited December 19, 2018 by Steve Browning Typo Quote Link to comment Share on other sites More sharing options...
police squad Posted December 19, 2018 Share Posted December 19, 2018 yep, I've been using swing bass for the past 10 years. no problems Quote Link to comment Share on other sites More sharing options...
bassbiscuits Posted December 19, 2018 Share Posted December 19, 2018 Yup - another Rotosound user here (among other things). Used Swing Bass roundwounds for ages and liked them. Currently using D'addario EXLs purely due to what was available instore when i needed some strings. Perfectly good strings. Quote Link to comment Share on other sites More sharing options...
Agwin Posted December 19, 2018 Share Posted December 19, 2018 26 minutes ago, Paul S said: A cheap way to try is to buy the Legacy brand sold by Strings Direct. They are re-badged Rotosounds but nearly half the price Yup, that's what goes on my basses. In fact, I ordered three sets recently (Legacy 40 60 80 100) and was delivered Roto Bass packaged strings at Legacy prices. Quote Link to comment Share on other sites More sharing options...
WHUFC BASS Posted December 19, 2018 Author Share Posted December 19, 2018 35 minutes ago, BigRedX said: If you want to support a British firm making strings have a look at Newtone. Ouch, they are quite expensive with the postage too. Quote Link to comment Share on other sites More sharing options...
mikel Posted December 19, 2018 Share Posted December 19, 2018 D'Addario's for me. Tried all the others over the years but always go back. Perfect strings for me but probably wouldnt suit everyone. Subjective, int it. 1 Quote Link to comment Share on other sites More sharing options...
EliasMooseblaster Posted December 19, 2018 Share Posted December 19, 2018 44 minutes ago, Drax said: Have used both 45's (Nickel) and 66 (Steel) a lot, never had issues with consistency nor noticed them eating frets. I'll second this - I've been using RS66s (Stainless Steel and Nickel varieties) for years and they remain my go-to. The nickels are slightly less punishing on the fingers and sound subtly warmer, but you'd struggle to hear the difference in a band mix. Tried a few other makes in a similar price bracket (D'Addario, Ernies, SiT, and Dunlop spring to mind) and I just find I like the tone of Rotos best. The closest competitors I've found have been Elixir (much more expensive) and Warwick Reds (a fair bit cheaper, interestingly). Quote Link to comment Share on other sites More sharing options...
stingrayPete1977 Posted December 19, 2018 Share Posted December 19, 2018 I've found them consistent for years, one gig, dead. 3 Quote Link to comment Share on other sites More sharing options...
Jono Bolton Posted December 19, 2018 Share Posted December 19, 2018 D'Addarios for me usually, although I've got Fender flats on my bass at the minute. I've used Rotos in the past but only when I've come across them cheap. I've always found that they're rough as toast. Quote Link to comment Share on other sites More sharing options...
Matt P Posted December 19, 2018 Share Posted December 19, 2018 1 hour ago, WHUFC BASS said: Ouch, they are quite expensive with the postage too. they are a bit more than Rotosound (26-28 quid depending on spec compared to about 20 for roto's) but DR start at about 30 quid minimum and Newtone will wind to your own spec. the postage is stated at £1.20 which i think is pretty good. (for the record i haven't yet tried the bass strings but i've been using the Newtone heritage acoustic guitar strings for about 10 years and won't buy anything else) matt Quote Link to comment Share on other sites More sharing options...
White Cloud Posted December 19, 2018 Share Posted December 19, 2018 1 hour ago, bassbiscuits said: Yup - another Rotosound user here Perfectly good strings. Me too. For some reason they get a really negative rep but I've used them for decades (amongst other things) and they remain my favourites Quote Link to comment Share on other sites More sharing options...
Count Bassy Posted December 19, 2018 Share Posted December 19, 2018 2 hours ago, BigRedX said: If you want to support a British firm making strings have a look at Newtone. Newtone also do round cores! Quote Link to comment Share on other sites More sharing options...
medpb Posted December 19, 2018 Share Posted December 19, 2018 After a 30 year journey looking for that holy grail bass string set I've ended up back where I started (Rotosound RS66LD). Utterly fantastic, I'd totally forgotten how brilliant they are. 1 Quote Link to comment Share on other sites More sharing options...
Wylie Posted December 19, 2018 Share Posted December 19, 2018 30 minutes ago, White Cloud said: Me too. For some reason they get a really negative rep but I've used them for decades (amongst other things) and they remain my favourites I use Rotosound flats and love 'em. The Monel Flatwounds are expensive, but a set lasts me a year. Quote Link to comment Share on other sites More sharing options...
bassbiscuits Posted December 19, 2018 Share Posted December 19, 2018 I actually use La Bella flats at the mo, but that's only cos I've gone down a different avenue tonally. Quote Link to comment Share on other sites More sharing options...
Bassassin Posted December 19, 2018 Share Posted December 19, 2018 (edited) Used RS66s for years, imo all the negative things about them are true - cheesegrater feel, they chew big divots in your frets, dead in a week. After I bought two consecutive sets with A-strings dead out of the packet, enough was enough. Strings of choice for me are Elixirs and have been for about 15 years now, and I always make sure I've got a few cheap 3-sets-for-a-tenner Ebay special packs lying around for emergencies. They're typically better than I remember Rotos being. Oh - and I hate that horrid red hairy crap they insist on wrapping around the ends. Edited December 19, 2018 by Bassassin Red Hairy Crap 2 Quote Link to comment Share on other sites More sharing options...
BigRedX Posted December 19, 2018 Share Posted December 19, 2018 5 hours ago, WHUFC BASS said: Ouch, they are quite expensive with the postage too. I suppose it depends what you are comparing them to. I have quite eclectic string requirements, so Newtone Bass VI and taper-wound 5 string sets compare very well on price next to what I was using before from La Bella and Warwick. Quote Link to comment Share on other sites More sharing options...
Dan Dare Posted December 19, 2018 Share Posted December 19, 2018 I tried Roto flats, but find them hard under the fingers and tonally a bit uninteresting. I've switched to XL Chromes, which really suit a J bass. When I used round wounds, I used to like the Roto nickels, but haven't tried them for ages since I went over to flats. Quote Link to comment Share on other sites More sharing options...
WHUFC BASS Posted December 19, 2018 Author Share Posted December 19, 2018 It appears they really are the Marmite of bass strings and for that reason alone I am going to try them so as I can say with some authority whether they're good or bad. I'm hoping they'll suit my Spector Euro 5XL as the strings on that are pretty dull at the moment. Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted December 19, 2018 Share Posted December 19, 2018 Love Roto steels but they die too quickly for me, I get a month/4 gigs max from them. Never had a bad set though, quality always been superb. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.