danny-79 Posted December 22, 2018 Share Posted December 22, 2018 Just a random post to ask/see what patch cables you use and why you chose them ? I’m using the Daddario solderless kit. (I’m after a couple of ft of cable if anyone has any spare they are willing to part with) but I’ve been looking at making my own, pancake jacks with Van Damme cable solderless vs soldier do you notice any audible difference? Quote Link to comment Share on other sites More sharing options...
Japhet Posted December 22, 2018 Share Posted December 22, 2018 I use Diago Patchfactory. Not had a single problem with them. I bought a cheapo solderless kit off ebay which was complete garbage and went in the bin. If I can I use straight cable-less connectors from pedal to pedal. 1 Quote Link to comment Share on other sites More sharing options...
GisserD Posted December 23, 2018 Share Posted December 23, 2018 Evidence audio Monorail Solderless system that has never let me down! I can make a new cable in minutes! Love em! 1 Quote Link to comment Share on other sites More sharing options...
ezbass Posted December 23, 2018 Share Posted December 23, 2018 (edited) George Ls solderless. I also use a long one to connect my pedal board to the amp. EDIT: Re tone. If this system is good enough for the tone hound that is Eric Johnson, it’s good enough for me. I’ve done side by side aural tests with other long leads, including monster and I prefer the George Ls. I’ve been using them for over 20 years. Edited December 23, 2018 by ezbass 1 Quote Link to comment Share on other sites More sharing options...
lee650 Posted December 24, 2018 Share Posted December 24, 2018 I use OBBM's Rockwire!! Van Damme cable with Hicon pancake jacks! Very flexible with a transparent tone and very little noise 😁 1 Quote Link to comment Share on other sites More sharing options...
CliveT Posted December 24, 2018 Share Posted December 24, 2018 If I were using more then a lower profile jack would be useful but as I only use 3 pedals I find these Fender patch cables solid and reliable. 1 Quote Link to comment Share on other sites More sharing options...
danny-79 Posted December 24, 2018 Author Share Posted December 24, 2018 2 hours ago, lee650 said: I use OBBM's Rockwire!! Van Damme cable with Hicon pancake jacks! Very flexible with a transparent tone and very little noise 😁 This was/is/might be my next move, make them up myself Quote Link to comment Share on other sites More sharing options...
JapanAxe Posted December 24, 2018 Share Posted December 24, 2018 Mainly Rockboard flat patch cables. I bought a quantity in various different lengths and have had no issues with them at all on my guitar pedalboards (I don't use effects on bass). 1 Quote Link to comment Share on other sites More sharing options...
GisserD Posted December 24, 2018 Share Posted December 24, 2018 (edited) Just incase anybody missed this..... There is a thread about this video somwhere but I couldn't locate it. Edited December 24, 2018 by GisserD Crocodile ate the turkey! 1 Quote Link to comment Share on other sites More sharing options...
paul_5 Posted December 25, 2018 Share Posted December 25, 2018 I've used George L's for years. I've had them for so long I can't remember why I switched, but recently a guitarist friend of mine used a cheap "6 for £10" patch cable to jumper channels on his amp and everything went dark. I leant him a George L one I had spare and hey presto, great tone returns. Solderless cables of this calibre are an absolute MUST if your pedals are mounted on a board and there's minimal movement between the pedals. 1 Quote Link to comment Share on other sites More sharing options...
Walliebal Posted December 25, 2018 Share Posted December 25, 2018 I use Rockboard, EBS and Harley benton flat cables. I need all the space I can get. Too many pedals 😁. They all seem good quality. 1 Quote Link to comment Share on other sites More sharing options...
cLepto-bass Posted December 25, 2018 Share Posted December 25, 2018 On 22/12/2018 at 11:03, danny-79 said: Just a random post to ask/see what patch cables you use and why you chose them ? I’m using the Daddario solderless kit. (I’m after a couple of ft of cable if anyone has any spare they are willing to part with) but I’ve been looking at making my own, pancake jacks with Van Damme cable solderless vs soldier do you notice any audible difference? I may be able to sort you out with some spare D'addario cable if I can find it all out. I switched to George L's and no longer need it. 1 Quote Link to comment Share on other sites More sharing options...
danny-79 Posted December 25, 2018 Author Share Posted December 25, 2018 2 hours ago, cLepto-bass said: I may be able to sort you out with some spare D'addario cable if I can find it all out. I switched to George L's and no longer need it. That would be great. Thank you Quote Link to comment Share on other sites More sharing options...
danny-79 Posted December 25, 2018 Author Share Posted December 25, 2018 10 hours ago, paul_5 said: Solderless cables of this calibre are an absolute MUST if your pedals are mounted on a board and there's minimal movement between the pedals. I Velcro and cable tie my pedals down. Zero movement Quote Link to comment Share on other sites More sharing options...
danny-79 Posted December 29, 2018 Author Share Posted December 29, 2018 On 24/12/2018 at 15:03, GisserD said: Just incase anybody missed this..... There is a thread about this video somwhere but I couldn't locate it. Just got around to watching this. Nice one thank you Quote Link to comment Share on other sites More sharing options...
tony_m Posted December 30, 2018 Share Posted December 30, 2018 Another @obbm Rockwire user here, various lengths with a mix of Neutrik and Hicon pancake jacks. All good quality stuff, and it's nice to support a fellow BCer! 1 Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted December 30, 2018 Share Posted December 30, 2018 OBBM or Fenders - at present I use the Fenders as I have my cables in different colours for different jobs. Makes it easier when setting up on dark stages. 1 Quote Link to comment Share on other sites More sharing options...
rollie 55 Posted December 30, 2018 Share Posted December 30, 2018 44 minutes ago, Lozz196 said: OBBM or Fenders - at present I use the Fenders as I have my cables in different colours for different jobs. Makes it easier when setting up on dark stages. i use different colours as well so i know what connects to what Quote Link to comment Share on other sites More sharing options...
JimBobTTD Posted December 30, 2018 Share Posted December 30, 2018 On 29/12/2018 at 13:49, danny-79 said: Just got around to watching this. Nice one thank you Could you provide a summary? I hate to sound like a modern-day moron, but I don't have 35 minutes. I can actually focus for that long, but I will not have that much uninterrupted time for a while! Quote Link to comment Share on other sites More sharing options...
danny-79 Posted December 30, 2018 Author Share Posted December 30, 2018 4 minutes ago, JimBobTTD said: Could you provide a summary? I hate to sound like a modern-day moron, but I don't have 35 minutes. I can actually focus for that long, but I will not have that much uninterrupted time for a while! There was/is no perfect cable. Everything is a trade off, bigger plugs better insulation, less room on board etc etc A couple of screen shots of the summing up at the end Quote Link to comment Share on other sites More sharing options...
JimBobTTD Posted December 30, 2018 Share Posted December 30, 2018 Thank you, @danny-79 The MXR cables i use are on neither list but they serve me well. 6" long, flat plugs. Quote Link to comment Share on other sites More sharing options...
danny-79 Posted December 30, 2018 Author Share Posted December 30, 2018 4 minutes ago, JimBobTTD said: Thank you, @danny-79 The MXR cables i use are on neither list but they serve me well. 6" long, flat plugs. Right at the start he listed a load of companies that he approached who for what ever reason were unwilling to participate in the test MXR was one Quote Link to comment Share on other sites More sharing options...
JimBobTTD Posted December 30, 2018 Share Posted December 30, 2018 11 minutes ago, danny-79 said: Right at the start he listed a load of companies that he approached who for what ever reason were unwilling to participate in the test MXR was one Aha...they would explain it. I can’t blame them. I was asked a million times in my last job to provide test access for people doing comparisons, quality checks etc etc. Most were not really serious about it. Quote Link to comment Share on other sites More sharing options...
HazBeen Posted December 30, 2018 Share Posted December 30, 2018 On 23/12/2018 at 11:08, GisserD said: Evidence audio Monorail Solderless system that has never let me down! I can make a new cable in minutes! Love em! These! Absolutely bullet proof, best patch cables I have ever used. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.